We offer top quality Lathe Machines which are designed in accordance to the international standards. We have employed proven technology, and manufactured these machines using the best quality materials available. Due to their strength, accuracy and durability and ease of use, Pinacho Lathes are perfect for all kinds of industry, and for educational purposes.

Standard Features:

• No soft parts in headstock, feed box and apron.
• All gears and shafts are hardened and ground.
• Latest design headstock.
• Compact and robust.
• Low motor power for high metal removal capabilities.
• No change gears.
• No gear train.
• Big range of metric, whit worth, DP & module threads and auto feeds through universal feed gear box.
• Oil bath for all gear boxes.
• Lubrication pump(single shot-manual) for slide ways.
• 400-450 BHN hardness for ‘X’ and ‘Z’ Slide ways.
• Induction hardened and ground screw rod for cross slide.
• Double nuts for backlash elimination.
• Sheet metal guard protects lead screw and feed shaft.
• Safety clutch mechanism to prevent machine overloading.
• No breaking of pins/no downtime.
• Reverse forward switch at apron.
• Instant spindle stop-by foot brake or by switch at apron.

We bring to you high performance Lathe Machine orbits with following features:

Bed:

Made up of close-grained cast iron.
Well ground and finished.
Capable to withstand vibration free operation under heavy load.
Accurately machined and ground on slide way grinding machine for perfect bearing surface.
Strongly braced bed with cross ribs to provide steady working of the machine under heavy turning, surfacing, screw cutting etc.
Initial accuracy is maintained throughout its life.

Head Stock:

• Casting: Casting of headstock is graded and seasoned to avoid unevenness and effect of weather.
• Boring: Boring of headstock is done with high technology method machine to get good result of headstock parallelism of spindle axis to bed surface and other results.
• Brass: Bearing is prepared from high grade lead bronze metal which gives good lubrication and vibration less performance.
• Bearing: In bearing type machine we use original SKFFTATA bearings, which give accurate operations
• Gears: We use helical gears in headstock to get noiseless operation and more strength in HD models.
• Spindle: We use spindle manufactured from EN-8 steel and ground for better surface finish and accuracy.

Saddle:
The saddle is mounted on inverted V and flat ways of bed to get long bearing carriage on the bed. This carries the cross slide and compound rest with square tool post. Screws used in compound & cross slide are made of EN-8 with gunmetal nut.

Appron:
It is double walled with independent drive motion for feeds and screw cutting. It is well arranged to avoid sliding-surfacing of screw cutting feeds at the same time. It is provided with a thread chasing dial and can be used while cutting.

Gears:
All gears are checked by run out test and pitch match method and checked in all respect

Testing:
Each & every machine is passed through a hard test for 48 hours.

We manufacture horizontal, double column & fully automatic Bandsaw Machine. It is hydraulically operated and PLC controlled. Our Bandsaw Machine is a rigid and sturdy machine & torsion free in construction.

Saw Head: It is supported by 2 rigid hard-chrome plated & ground vertical columns, guided by pre lubricated bushes. Blade is guided by bearings & carbide wear pads and can be tightened and released hydraulically to recommend tensile strength of the saw blade.

Auto Work Height Control: Its quick approach arm automatically adjust the blade height to accommodate different sizes and make contact when the saw starts cutting.

Blade Guides: The guide ensures accurate cutting & durability. These factory set guides consists of spring loaded, self-adjusting carbide-faced inserts. Adjustment screws are provided to allow easy blade changing. The blade is guided by roller bearing & carbide wear pads.

Saw feed: Saw feed's "up & down" motion is controlled by hydraulic cylinder & regulated by a pressure regulated feed valve.

Job Clamping: It is controlled by hydraulic valves. The jaws of the front & rear vices are in one straight line and perpendicular to the blade.

Split Front Vice: It automatically indexes to a bar-end remnant of 50mm only & securely clamps the work piece on both side of the cut thus minimizing drop-off burrs. The design is suitable for nesting or bundle cutting and is ideal for cutting short length pieces.

Auto Length Indexing & Length Counter: The automatic feeding of job is also done by indexing. The feed length can set by means of screw & digital counter assembly with length accuracy of +/- 0.2mm. The hand wheel is provided to set the cutting length up to 400mm which can be read on digital counter in increment of 0.1 mm. Multiple strokes makes it possible to multiply the number of index cycles when pieces longer than 400mm are required(available in DCA automatic models).

We offer the most modern and advanced radial drilling machine. It is built to meet the most exacting requirements of engineering and allied trade for various operations such as drilling, tapping, lapping and boring materials like cast iron steel, plastics, etc. Its specifications and features are:

Standard Accessories

• Electrical Complete
• Drill Drift
• Leveling bolt & pad
• Oil can / Manual book

Extra Accessories at Extra Cost.

• Box table with “T” slotted
• Coolant pump with fitting
• Drill chuck & arbors
• Drill vice/ Drill sleeve

Specification - MT-40/1000 DC

CAPACITY:

• Drilling Capacity 40 mm

DRILL HEAD:

• Spindle nose MT -4
• Spindle travel 175
• Number of spindle speeds 8
• Spindle speed range 90 to 1000 RPM
• Number of power (2)
• Power feed range 0.20 - 0.10 mm Rev

WORKING RANGE:

• Drilling radius max. 1 min. 1115-550
• Distance from column to spindle centre max. 1 min. 1020-400
• Distances from spindle to base max. 1 min 1180-430
• Column diameter 210
• Vertical power movement of arm 750
• Horizontal movement of drilling head 630
• Box table L x W x H 510 x 380 x 355

BASE PLATE:

• L x W x H 1625 x 850 x 190
• Working Surface 1020 x 650
• Number 1 Size of T slot 31 16 mm
• Power Drilling motor 1.5/1400 KW/RPM 1.5/2800 KW/RPM
• Elevation motor for arm 0.75/1400 KW/RPM
• Shipping size approx L x W x H 1750 x 1000 x 2000

Day to day improvements are contemplated for better performance of the machine, we reserve the right to alter the specification without prior notice.

We offer SECO open centre wedge hook chucks with through hole. They are ideal for high speed chucking, bar chucking and universal machining. These chucks come fitted with back plate ready to mount on the machine.

Special Features:

• High speed
• Constant accuracy & high endurance
• Strong Gripping -Available in 2. 3 & 4 Jaw configurations

We offer you state-of-the-art Cylindrical Grinding Machines which are equipped with the latest control with teach-in programming and is easy to operate. This greatly saves on preparation time while increasing efficiency.

Features:

Casting is stress relieved by vibration "FORMULA 62" and in normalizing oven. Tail stock, wheel & work spindles are heat treated to achieve dimensional stability. Assembly of precision bearings within dust free environment. Tail stock spindle acting in close tolerance & super finish bore.

• All rotating parts are dynamically balanced.
• Table & wheel slide faced with anti-friction material TURCITE - B
• In mechanical model, only cross slide faced with TURCITE - B
• Independent lubrication system to the guide ways of table and grinding wheel head.

Roundness:

Dead centre < 0.003 mm. (cone centre ground and lapped).
Live spindle < 0.004 mm. (0.75 mm hardened test piece).

Surface finish
0.3 ~m Ra. (using 60 grit wheel on hardened test piece)

Parallelism:
(Convex) 0,005 mm. (using 600 x 60 mm)
With machine at constant ambient temperature 20 – 250° C and with grinding wheel and coolant suited to material being ground.

We manufacture pyramid type bending rolls which can pre bend both ends of a plate with a single insertion into the bending machine. They provide reduction in material- handling time and cost. These machines allow the fabricator to select the best procedure for a particular job. This type of machine reduces the need for feeding the sheet through more than once.

We also manufacture the woodworking machine which are well suitable for carrying out operations like Cutting of logs and planks, Thicknessing, surfacing, Sawing,,Grooving, Moulding, Rebating, Tenoning etc.

MODEL	WT-701	WT-702	WT-703
Max.Planning Width	13"	18"	18"
Thickness Capacity	7"	7"	7"
Surface Table Length	48"	48"	61"
Thickness Table Length	22"	26"	26"
Cutter Block (RPM)	4000	4000	4000
Power Reqd. (HP/RPM)	3/1440	5/1440	5/1440

We bring to you Universal Milling Machines with automatic feeding arrangement in longitudinal, cross and vertical direction. It can select from different speeds in all geared models and automatic longitudinal feed in geared head models.

Spindle:
The milling spindle is fitted in two taper roller bearings. The different spindle speeds which are in geometrical progression are obtained by means of sliding gears, by which only such gears come into mesh which are necessary for the desired speed. All the gears run in oil bath, the wear thus being minimized.

Table:
The table has a strong cross section and a coolant groove, fitted with a strainer at the draining point. The table screw has gunmetal nut which minimizes wear and tear. The table screw is mounted on the thrust and ball bearing which also takes the axial load of the screw.

Knee:
The knee is well braced by internal partition walls giving the greatest stability in all respects. It has been carefully designed with wide slide surfaces which give a rigid support to saddle and table. The vertical screw raising and lowering of the knee is provided with thrust bearing for taking the vertical load. The feed gear box is built on the side of the knee.

Base:
The base, which at the same time serves as a coolant tank, is simple dimensioned and heavy. The coolant pump and coolant pipes are so dimensioned so that enough coolant is supplied to the cutter.


Column:
The column owing to its special form is very rigid and all guides are hand scraped.

Extra Accessories(at extra cost)

• Universal dividing head complete with a set of gears.
• Vertical milling attachment.
• Slotting attachment
• Rack cutting attachment
• Rotary table
• Universal machine vice
• Machine lamp
• Coolant pump with fittings

We also manufacture power presses like pillar type power press, inclinable/ non inclinable and "c" type power press.

Capacity in Tons	5	10	20	30	50	75	100	150
Bed Size	220x330	325x435	356x508	432x575	520x740	600x850	660x915	720x980
Bed to Ram Bottom	220	230	255	275	382	400	450	500
Stroke Length	40	51	57	63	80	100	115	150
Crank shaft Dia	70	78	80	90	100	127	152	170
Gear Dia.	356	432	554	600	660	762	863	965
Fly Wheel Dia.	406	540	610	690	762	863	965	1067
Hole in Ram For Die Clamping	22	25	31	31	38	44	44	50.8
Floor to Top of Bed	620	711	760	790	850	863	863	914
No's of Stroke Per Minute	70	65	60	60	45	40	40	35
Overall height without motor	1270	1524	1702	1718	1905	2032	2362	2540
Approx Floor Area Required	533x685	619x762	711x1116	762x1143	813x1219	914x1272	965x1397	1143x1425
Power Required	1 h.p.	2 h.p.	3 h.p.	3 h.p.	5 h.p.	7-1/2 h.p.	10 h.p.	15 h.p

We also manufacture Shearing machines which are been extensively used by sheet metal industries. The shearing machines we manufacture are over crank shearing machine, under crank shearing machine, under crank mechanical guillotine shearing machine and over crank mechanical guillotine shearing machine.

Technical Data	Model	Ric 1 OC	Ric 2 OC	Ric 3 OC
Shearing Length	mm	2000	2500	3000
Shearing Capacity	mm	6,8,10,13	8,10,13	8,10,13
Depth of gap in frame	mm	150	200	250
Max. Back Gauge adjustment	mm	25-600	25-600	25-600
Size of Blades (Blade Segments)	mm	1025x75x16	1270x75x22	1050x75x25
Length of Cut in One Stroke	mm	2000	2500	3000
No. of Strokes per minute	No.	40	40	40
Power Required	HP/rpm	10,12.5,15.20/1440	15,20,25/1440	15,20,30/1440
App. Floor Area Required	Â	Â	Â	Â
Length x Breadth x Height approx	mm	3000x2400x2400	3650x2400x2400	4100x2600x2600