Pumps & Pump Packages

More features than you ever expected — including our stainless steel center sections and the most reliable air valve in the industry.

That’s what makes our FDA pumps perfect for all of your food-related applications. You won’t find a more complete line of FDA-compliant pumps anywhere else.

Features and Benefits:

• 1.5 in (38 mm) Tri-clamp connection
• All fluid contact materials are FDA-Compliant and meet the United States Code of Federal Regulations (CFR) Title 21
• Fluid pressure to 120 psi (8.4 bar, 0.84 MPa)
• All Graco diaphragm pumps offer flow rates up to 25% greater than many competitive pumps with PTFE diaphragms
• Wide range of food-grade elastomers available including Santoprene, Buna-N, Viton and PTFE

The Graco 1590 3A sanitary pump is designed to meet the stringent sanitation requirements of the milk and dairy industry. Mounted on a floor stand and equipped with a leak detector, the 1590 3A food grade pump can be rotated 185 degrees to drain any excess sanitation chemicals used in the CIP (clean in place) process.

Features:

• Pumps up to 90 gallons per minute (341 lpm)
• Easy to clean with its quick knock down, 185° rotating design
• Certified by 3-A for dairy and milk applications
• Features our lube free, non-sticking air valve
  

More features than you ever expected — including our stainless steel center sections and the most reliable air valve in the industry.

That’s what makes our FDA pumps perfect for all of your food-related applications. You won’t find a more complete line of FDA-compliant pumps anywhere else!

These food grade pumps are made of stainless steel construction and meet the highest requirements for gentle handling, hygiene, cleaning and sterilization.

Features and Benefits:

• 2-1/2 in (63.5mm) Tri-clamp connection
• High flow - 150 gpm (568 lpm)
• Fluid pressure to 120 psi (8.4 bar, 0.84 MPa)
• All fluid contact materials are FDA-Compliant and meet the United States Code of Federal Regulations (CFR) Title 21
• Wide range of food-grade elastomers available including Santoprene, Buna-N, Viton and PTFE

Graco on-demand dispensing pumps utilize a pressure sensing system to start and stop the pump when the hose valve is opened or closed.

Our on-demand pumps are available with a 115 volt AC motor or a 12 volt DC motor. The 115 VAC units offer a flow rate of 2.3 gpm for automotive applications and a 4.0 gpm flow rate for large equipment service. Maximum pressure for the 115 VAC units is 650 psi (45 bar) and 400 psi for the 12 VDC units.

Features:

• Electric gear pump
• Extremely quiet pump operation
• Output flow is continuous and non-pulsating
• Low operating and installation costs
• Outlet check valve and thermal relief valve included

Graco Fuel Transfer Pumps have an efficient motor and gear design that allows for high output and with minimal current draw. They can easily be mounted on any tank design, on either side of the truck. The Graco fuel meters (260405 & 260414) provide trouble-free service for measuring the delivery of gasoline, kerosene and diesel fuel. Meters may be mounted on a Graco transfer pump for fast, efficient fueling of equipment.

Features:

• UL Listed for gasoline, diesel fuel, kerosene and fuel oil (260000)
• Motors are designed for 30-minute duty cycle
• High output flow up to 12 gpm (45 lpm)
• Die cast aluminum construction is lightweight and corrosion resistant
• Easy servicing without disconnecting any electrical connections

Now there is a quick and simple tool for adding new bulk dispense to your service offering. The Hurricane is a complete dispense system and includes everything you need to get up and running quickly.

 

Features:

 

• Go from the box to pumping oil in just 10 minutes!
• The only tools you need are a Phillips screwdriver and a utility knife.
• Fits any container up to 44 in (1.1 m) tall with a 2 in NPT opening.
• Measures in quarts, gallons, pints or liters.
• Has an automatic nozzle, easy-to-carry handle, 8 or 25 ft (2.4 or 7.6 m) hose and an accurate and easy-to-read digital display.