We manufacture Carbon Packing Rings which are used in steam, Turbine, Water Turbine, gas Turbine for different type of industries like Sugar, Cement, Textiles, Power Plant and Electricity Board etc. These packing rings are of various types and size used in turbine of various kind also the piston Rings which are also used in Compressors not only as the Piston Rod Packing but also as the components of Pistons, Piston Rings and Guide Rings. Carbon glands are used in the sealing of liquids and gases, restricting leakage to a minimum. Carbon gland rings are provides an economical simple and effective seal on impulse turbines, water turbines, steam turbines, gas turbines, low pressure fans and blowers.

Application • Water Turbine (Hydro Turbine) • Steam Turbine • Gas Turbine • Rotary Compressor and Blowers

We manufacture Carbon Packing Rings which are used in steam, Turbine, Water Turbine, gas Turbine for different type of industries like Sugar, Cement, Textiles, Power Plant and Electricity Board etc. These packing rings are of various types and size used in turbine of various kind also the piston Rings which are also used in Compressors not only as the Piston Rod Packing but also as the components of Pistons, Piston Rings and Guide Rings. Carbon glands are used in the sealing of liquids and gases, restricting leakage to a minimum. Carbon gland rings are provides an economical simple and effective seal on impulse turbines, water turbines, steam turbines, gas turbines, low pressure fans and blowers.
 Application • Water Turbine (Hydro Turbine) • Steam Turbine • Gas Turbine • Rotary Compressor and Blowers.

The primary function of a Carbon Brush is to deliver or collect current from a rotating part of an electric Machine. The brushes should maintain a close contact with rotating part, (i.e. Commutator or slip ring) / in order to ensure sparkles operation without wearing itself too quickly. There are various types of Carbon \ Brushes in different types of Grades and Size which are used in electrical D.C.Motors, Slip Rings Motors Power Generators, welding Generators etc. All the Textile Mills are Running with the above electrical equipments. We are manufacturing Carbon Brushes from the imported raw material of Morganite (U.K.) & Ringsdorff (West Germany) as per specific grades and sizes.

Application

• DC/AC Motors
• Slip Rings Motors
• Power Generators
• Welding Generators
• Crane Installation

Carbon Rings and bearings have been progressively developed by us with experience and research over the last 30 years. They are used extensively where contamination from oil or grease is undesirable. Carbon Bearings are giving long life and shafts were highly polished with negligible wear, no maintenance or grease being required. Carbon Rings and Bearings are being used in most of all the textile Machineries, which are self lubricating chemically inert, low weight, high thermal conductivity and consistency to temperature changes. We have developed all types of Carbon Rings and Bearings which are currently and regularly being utilized i power projects, Chemical Industries, Food Industries, all the textile mills and process houses for their machines like jigger, Drying Range, Soaper, Doll Head, Rotary Joints, J.Box Machines, and continuous Bleaching Plant etc. Also we undertake to supply as per your specification sample or drawings.

Steam Joint Rings are used in Rotary pressure joints. These seal rings effect flow of hot liquid or steam from a stationery supply pipe to a rotating machine part. Such machineries like rubber mixing roller mills, calendaring machines and cylinders are used in papers and textile industries as well as in plastics, chemicals and other industries for similar application.

Material Used :

• Carbon Resin Impregnated ( Sinthered Process )
• Carbon Metal Impregnated ( Sinthered Process )
• Deva Metal Carbon ( Press To Mould )
• Indigenous Carbon ( Press To Mould )

For :

• Textile Industries
• Paper Industries
• Food Industries
• Other Industries

With low specific density, self lubricating properties and with without any effect in hot or cold liquids, carbon vanes find applications in dry and wet running rotary pumps, compressors and vane type vacuum pumps. These are ideally suited for rotary pumps handling water, petrol, fuel oils and other liquids.

Vanes are made in the range of carbon material (carbon graphite)metal impregnated carbon graphite and resin-bounded graphite to meet many different applications. Carbon Vanes are self-lubricating and therefore ideal for pumps, handling liquids whose lubricating properties are poor, such as petrol, diesel etc. They can also operate in unlubricated compressors to deliver air or gas uncontaminated by lubricating oil or grease.

Application

• Spray Paint Equipment
• Packing Machinery
• Food Processing Equipment
• Fuel Tanker Meters
• Drink Vending machines
• Wet Running Vane Pumps & Meters
• Automotive Diesel Fuel Pump.

Material Used

• Carbon Imported Resin Impregnated
• Indigenous Carbon (Press TO Mould)

Carbon seal face rings in various sizes and designs and with close dimensional tolerance for use as an integral part of mechanical seals in general utility pumps and chemical pumps. Carbon Sealing Rings are used as the water face of most mechanical seals for the sealing of fluids in all industries. Carbon seal faces are compatible with a wide range of metallic and ceramic counter faces including silicon carbide and tungsten carbide. The carbon material used are done different impregnation as per the requirement of each machine and liquid medias. Some of the commonly used impregnation are resin impregnation, Metal impregnation etc.

Application:

• All kind of mechanical shaft seals
• Rotary Steam Joints
• Compressors

We manufacture Graphite crucible use in manufacturing Jewellery. Also heating elements for extrusion purpose and different components like dies, rods etc. made from imported graphite in Isotropic Grade as well as Indian Grade.

Carbon 'V' block of high quality is used in Diamond manufacturing Unit. This carbon 'V' block is use in the machines of diamond industries like sowing machine and grooving machine to support the spindle at two ends. Where the diamonds are cut and given different shapes.

Application:

• Jewellery Manufacturing Industries
• Diamond Manufacturing Industries
• Isotropic Grade (U.S.A, Japan, France)
• Indian Grade

The Graphite is use where the property of lubrication is required. Graphite is use in different kind of industries for lubrication purpose where the working temperature is high. Graphite material is mainly use in cement industries in Kiln plant where the lubrication purpose is required. Graphite comes in different form such as Powder, Rods, Block, etc. They are machined as per the drawing or size according to the requirement.

Application:

• Cement Industries
• Fertilizer Company
• Metal Manufacturing Company such as
brass, steel, aluminum, copper etc

Different type of graphite synthetic sliding part and synthetic bushes use in different stener machine clips.

Every where high temperatures are occur and oil free slide ways are required. Graphite Carbons finds employment as a lubricating material especially in Textile Industries are Asbestos Graphite Slide Rails used in ordered to avoid contamination from the normally used lubricating agents. We have developed Asbestos Graphited Slide Rails for Famatex, Monfort And T.T.Stenter Machines for which we have received the technical know-how from abroad. It has properties like Self-lubricating Durability, Long life, Strong enough with a good flexibility and highly heat resistance. In result of these, Stenter Machines will run smoothly without much load over the Electrical Motors and also it will increase the life of Stenter Clips. We also manufacture lock pins from high spring steels sheet which are also tempered.

We manufacture all types of complete Mechanical Shaft Seals and Sealing Rings for different kind of application, such as circulation pumps and pressure pumps including all types of Pumps, Mixers, Agitators, Compressors which are currently and regularly being utilized by many types of Industries.

Our Mechanical Seals can be operated at temperature ranging from 100 degree Celsius to 350 degree celsius. For application in such high temperature special material grades are used.

The primary seal face is of high grade carbon. The bellows are made from neoprene viton and rubbers. The stationery face is of ceramic, satellite, tungsten carbide or silicon carbide depending on the service condition.

Also we undertake to supply as per your specification sample or drawing.

Application:

• All kind of Pumps
• Mixers
• Agitators
• Kneaders
• Autoclaves
• Compressors

'Supertex' Rotary joint is a self-supporting rotary Joint used to admit steam or fluids in to textile machines, Drying Ranges, Calenders, Sizing Machines-paper Machines and other machines with rotating heating or cooling cylinders, rolls or drums. It is suited for the higher pressure and operating speeds. Carbon guide and seal Rings are provided of high quality material. Suitable siphon elbow can be furnished with the joints.

Application:

• Textile Industries
• Rubber Industries
• Plastic Industries
• Packing Industries
• Steel Plant