Groz Net Industries

Air Filters are used to separate dust, dirt, moisture & other contaminants from compressed air

These have a Die Cast aluminum filter head, polycarbonate bowl with a steel bowl guard & high performance sintered Bronze filtering element

Designed with a Separator & shield for efficient moisture separation

WETTED COMPONENTS: Aluminum, Bronze, Steel, Acetal, Polycarbonate, Stainless Steel & Nitrile

Note: Also available Coalescing Filters / Mist Separators, custom built for removing fine oil particles and droplets of sizes upto 0.01 microns


WARNING !

Polycarbonate bowls may get damaged and possibly fail if exposed to synthetic oils, thinner, solvents, trichloroethylene, kerosene or other aromatic hydrocarbons

F13
MINIATURE
Max flow rate:
28 CFM / 800 LPM
Threaded type steel bowl guard

F14
INTERMEDIATE
Max flow rate:
80 CFM / 2250 LPM
Bayonet type steel bowl guard

F15
STANDARD
Max flow rate:
125 CFM / 3500 LPM
Bayonet type steel bowl guard

F17
HEAVY DUTY
Max flow rate:
230 CFM / 6500 LPM
Bayonet type steel bowl guard

Ordering Information

Groz Part# Ordering# Groz Part# Ordering# Description Port size Flow Rate (Max)** Bowl Size Height(h) Width(w) BSP NPT CFM LPM Oz. ml in mm in mm F13603-S 60100 F13903-S 60150 Miniature 1/8" 28 800 0.3 9 4.45 113 1.57 40

Air Filters are used to separate dust, dirt, moisture & other contaminants from compressed air.

These have a Die Cast Aluminum Filter Head & bowl with a high performance Sintered Bronze Filtering element. Designed with a Separator & shield for efficient moisture separation.

Metal Bowl makes these good for use in Chemical plants, Paint shops, pharmaceutical plants, foundries etc. where ambient air may contain chemicals, such as acetone, benzene, kerosene, gasoline, carbon tetrachloride, ethylene dichloride, toluene etc. These are also recommended for high pressure applications and for use with air compressor systems using fire resistant lubricants.

WETTED COMPONENTS:
Aluminum, Bronze, Steel, Stainless Steel & Nitrile

F13-M
MINIATURE
Max flow rate:
28 CFM / 800 LPM


F14-M
INTERMEDIATE
Max flow rate:
80 CFM / 2250 LPM

F15-M
STANDARD
Max flow rate:
125 CFM / 3500 LPM


F17-M
HEAVY DUTY
Max flow rate:
230 CFM / 6500 LPM

Ordering Information

Groz Part# Ordering# Groz Part# Ordering# Description Port size Flow Rate (Max)** Bowl Size Height(h) Width(w) BSP NPT CFM LPM Oz. ml in mm in mm F13613-MS 60130 F13913-MS 60180 Miniature 1/4" 28 800 0.3 9 4.53 115 1.57 40

Air Lubricators are used to feed lubricants to pneumatic equipment. These maintain a constant oil-to-air density over a wide range of flow.

The Groz L1 series Lubricators are Fog/ MicroMist type, upto 50' pipe runs

These have a Die Cast Aluminum Head, polycarbonate bowl with a steel bowl guard. The head is fitted with Oil drop indicator, Oil drop controller & Oil filling plug

WETTED COMPONENTS:
Aluminum, Bronze, Steel, Acetal, Polycarbonate, Stainless Steel & Nitrile

Note: Designed for best performance with 32 grade oil

L13
MINIATURE
Max flow rate:
48 CFM / 1350 LPM
Min flow rate:
0.42 CFM / 12 LPM
Threaded type steel bowl guard

L14
INTERMEDIATE
Max flow rate:
106 CFM / 3000 LPM
Min flow rate:
1.41 CFM / 40 LPM
Bayonet type steel bowl guard

L15
STANDARD
Max flow rate:
200 CFM / 5650 LPM
Min flow rate:
1.59 CFM / 45 LPM
Bayonet type steel bowl guard

L17
HEAVY DUTY
Max flow rate:
318 CFM / 9000 LPM
Min flow rate:
1.76 CFM / 50 LPM
Bayonet type steel bowl guard


WARNING !

Polycarbonate bowls may get damaged and possibly fail if exposed to synthetic oils, thinner, solvents, trichloroethylene, kerosene or other aromatic hydrocarbons

Ordering Information

Groz Part# Ordering# Groz Part# Ordering# Description Port size Flow Rate (Max)** Bowl Size Height(h) Width(w) BSP NPT CFM LPM Oz. ml in mm in mm L1360 60200 L1390 60250 Miniature 1/8" 48 1350 0.68 20 5.31 135 1.57 40

For use with Regulators for setting Output Pressure. These are graduated both in BARS & PSI with a max. Reading of 200PSI/14 BAR. Pressure Gauge is graduated in intervals of 5 PSI/0.20 BAR

These have male threads on the back side & fit female threads on the Regulator

Ordering Information

Groz Part# Ordering# Groz Part# Ordering# Threads For use with Model Series BSPT NPT A2G02 60630 A2G05 60635 1/8" Miniature, Intermediate & Standard A2G08 60631 A2G14 60636 1/4" Heavy Duty

One of the Most commonly used air line accessories, Regulators are used to maintain a steady outlet pressure, unaffected by variations/fluctuations in the inlet pressure.

Regulators step down the air line pressure & can be set at any desired pressure below the inlet air pressure.

Aluminum die cast, these are designed with a Non Raising "Press to Lock" adjusting knob for locking at any set pressure.

Regulators work on a Diaphragm operated, relieving type mechanism with pressure compensated by balanced poppet. These can be installed in any position & need out be vertically mounted

WETTED COMPONENTS:
Aluminum, Brass, Steel, Acetal, Stainless Steel & Nitrile

R13
MINIATURE
Max flow rate:
21 CFM / 600 LPM

R14
INTERMEDIATE
Max flow rate:
88 CFM / 2500 LPM
In-built Venturi for Flow Compensation

R15
STANDARD
Max flow rate:
140 CFM / 4000 LPM
In-built Venturi for Flow Compensation

R17
HEAVY DUTY
Max flow rate:
210 CFM / 6000 LPM
In-built Venturi for Flow Compensation

Ordering Information

Groz Part# Ordering# Groz Part# Ordering# Description Port size Flow Rate (Max)** Pressure Gauge Port Size Height(h) Width(w) BSP NPT CFM LPM in mm in mm R13604 60000 R13904 60050 Miniature 1/8" 21 600 1/8" 3.19 81 1.57 40

Wall Mounting Bracket is a special type of Spacer Block which is 'T' shaped & has holes to mount on the wall. These connect 2 components in modular assemblies & make them wall mountable.

Aluminum Die Cast these have sealing rings fitted into them on both sides. The sealing rings make a leak proof connection, without the need to have a threaded fitment

Ordering Information

Groz Part# Ordering# For use with Model Series A2W01 60640 Miniature - F13, L13, R13, FRC13 A2W02 60641 Intermediate - F14, L14, R14, FRC14 A2W03 60642 Standard - F15, L15, R15, FRC15 A2W04 60643 Heavy Duty - F17, L17, R17, FRC17