Center Punches are manufactured from selected carbon steel. These are accurately hardened and tempered so that the point will withstand continuous use and the striking end will not splinter. These are ideal for clearly marking metal in work layout & making indentations in a work piece before drilling to ensure correct location of drill points.
The working tips are centered and ground to the correct angle (90 included angle) for increased efficiency in marking. The striking end is chamfered to prevent breakage.
These are available in 3 types.
Centre Punches-Heavy Duty Single piece construction with hexagonal shank, these are amongst the strongest and most durable of Centre Punches. Working ends are accurately ground and the punch body is in premium powder coated finish.
Centre Punches - Round Head Single piece construction with round shank and round striking head.The knurling is clean and well cut to provide a positive finger grip. This range of punches have a rust inhibiting black oxide finish.
Centre Punches - Square head Two piece construction with round shank and square striking head. Clean cut knurling on the shank provides a positive finger grip The 3/8" (9.5 mm) square head provides a larger area for striking & also prevents the punch from rolling off. This range of punches have rust inhibiting black oxide finish.
Pin Punches are manufactured from high quality carbon steel, accurately hardened and tempered so that the Pin will withstand continous use and the striking end will not splinter. These are induction hardened to ensure consistent hardness and a special tempering process the head from fracturing, thereby preventing accidents.
These are available in 2 types: 1.Pin Punches - Heavy Duty Single piece construction with hexagonal shank. Single piece construction imparts additional durability to the punch. Working ends are accurately ground and the punch body is in premium powder coated finish.
Extra Long Pin Punches - Heavy Duty The extra long pin punches are useful for all applications where added leverage is required.
2.General Purpose Round Shank Pin Punches
Pin Punches are used for driving out and removing already loosened pins & keys after initial movement by a solid or starting punch.
Manufactured from selected carbon steel, these have a single piece construction. Punches are accurately hardened and tempered for increased working life. The working ends are machine ground with the body in premium powder coated finish.
Drift Punches are ideal for lining up holes in 2 or more pieces of metal and for drawing pins through various assemblies. These are also referred to as "Alignment Punches".
Insert the punch into the hole, pry or twist both into alignment. Tapping gently with the long well formed taper will ensure that the holes are in perfect alignment.
Hinge Centering Punches are used for starting and centering screw holes when attaching countersunk hardware such as hinges, hangars, hasps, brackets, locks and drawer pulls.
Punch has a spring action with a hardened steel pin for convenient marking. The taper end of the punch ensures starting hole is correctly centered in the screw hole.
Ordering Information
British Standard Round Dies
Cat. Nr.
Ordering Nr.
Stock Size
Overall Length
Inch
mm
Inch
mm
JCP/01
25004
3/8
10
2-1/2
63
Ideal accessory for close quarter drilling
Punch being used to mark screw starting centres on a door frame
Single piece construction with hexagonal shank imparts additional durability. Body has a premium powder coated finish with chamfered striking edk that helps reduce mushrooming & chipping.
These precision-machined roll pin punches are specifically designed to remove spring / roll pins. The heat-treated point has a rounded ball to center the point into the pin allowing the point shoulder to maintain maximum contact with the pin during removal and eliminating any damage to the pin or wall
Roll Pin Punch being used to remove spring pin from a gun
Ordering Information
Cat.Nr.
Ordering Nr.
Ball Diameter (D)
Stock Size
Overall Length (L)
Inch
mm
Inch
mm
Inch
mm
RPP/3-32
25640
3/32
2.5
1/4
6
3.1/2
89
RPP/1-8
25641
1/8
3
1/4
6
3.3/4
94
RPP/5-32
25642
5/32
4
5/16
8
4.1/2
114
RPP/3-16
25643
3/16
5
5/16
8
4.1/2
114
RPP/1-4
25644
1/4
6
3/8
10
5.1/2
140
RPP/5-16
25645
5/16
8
3/8
10
6
150
RPP/6/ST
25646
A Set of 6 Roll Pin punches containing one each of 3/32"(2.5mm), 1/8"(3mm), 5/32"(4mm), 3/16"(5mm), 1/4"(6mm) & 5/16"(8mm) packed in a vinyl pouch.
Groz manufactures a complete range of fully automatic single hand operated spring loaded punches, wherein the built in mechanism delivers a punch just with the pressing of the head.
The depth of the impression is variable and can be adjusted from light marking to heavy blows by turning the knurled head. Screwing the cap downwards produces heavy indentation;
progressively lighter marking can be obtained by screwing the cap upwards. Once the knurled cap is set to the desired position, the punch will strike the same depth every time.
These have a round shank with clean and well cut knurling for positive non slip grip.
Tips are made from hardened tool steel and can be easily removed for resharpening or replacement.
These are available in three types:
Automatic Centre Punch- Light Duty Useful for light marking jobs.
Automatic Centre Punch- Heavy Duty A heavy-duty version of the above punch. It is capable of making very deep indentations.
Marking Punch A heavy duty punch with a single piece point and shank.
Groz manufactures a comprehensive range of mechanic's vices useful for all medium to heavy duty applications. Manufactured from high quality grey iron castings - a very strong material with excellent shock absorbing capacity and immense strength under compression, these rigid & robust vices machined to close tolerances, are designed for smooth operation and reliability.
The front jaw beam with machined construction fully encloses the vice spindle protecting the threads from contaminants and damage. The long unbreakable malleable iron nut securely locked in the body ensures maximum thread surface contact and constant alignment between body and the sliding jaw. Jaws are hurdened 45 +/-5 HRC.Perfect alignment of main screw and nut reduces wear and gives long trouble free service. Vices have an attractive blue finish with main screw and handle plated. The anvil has a ground finish.
A common sight in almost all workshops and garages, these are available with a fixed base for regular usages or a swivel based that allows the rotation though 360(degree) with firm locking at any position. The swivel base allows the vice to be used in confined spaces or where the angle with the vice has to be adjusted to accept work of varying lengths. The swivel base can be easily removed and the vice converted back to regular fixed base vice.
Ordering Information
Professional Mechanic's Vices - Bench Vices[Series BV]
With an all steel construction, these fixed base vices are built to withstand the shocks of hammering, chipping and other tough applications.
Each vice has an integrated anvil for shaping and beating, together with an extra heavy-duty sliding jaw and large diameter screw. Forged tommy bar along with the steel main screw helps in effective transmission of pressure on the work piece.
Carbon Steel jaws are hardened 50 +/- 5 HRC to withstand tough use and are serrated for non-slip grip. Safety stopper provided at the end of slide prevents slide from fall during usage.
Also available is the Offset Jaw Vice: Offset jaw design allows for unlimited vertical depth for holding long jobs without any obstruction from the vice slide.
Offset jaws hold long & bulky jobs without obstruction from the vice slide.
Sturdy craftsman design for drill stands,bench drills and drill presses, these compact vices have a low profile format making them suitable for multitude of metal working and woodworking applications.
Manufactured from graded cast iron, vices have a precision ground base and vice bed for smooth lateral movement of the movable jaw. Fixed jaw with 3 longitudinal and 1 transversal prism allow firm gripping of round stock both horizontally and vertically. Special seat in jaw facilities clamping of low height work pieces. Spindle moves inside the hollow hand grip allowing the vice to be tightened at any position on the thus increasing the scope of application of the vice. Elongated clamping slots for rapid adjustment of the vice on the work table help save time.
This vice is also available with 3 mounting options via 2 additional precisely ground surfaces: end face and side face. This allows for along all axes with a single setting of the job and holding of long workpieces which are cumbersome and difficult to manage in regular vices.
Fully ground side face allows for right angle machining with the same jaw setting. The jaw width acts as jaw height facilitating longer workpieces to be held.
Fully ground end face allows for right angle machining with the same machine setting.
Superior quality steel wire frame is designed to ensure correct alignment and give prefect blade tension during use. Blade holders intrinsic in the frame avoid protrusion of the blade from the ends. Blade replacement is simply by compressing the front end of the frame against any solid surface. These are available in two types:
1.Junior Hacksaw Frame - Powder Coated: Steel wire frame has rust inhibiting powder coated finish. Available in attractive blue or grey finish. 2.Junior Hacksaw Frame - Plated: Chrome plated steel wire frame has a finger guard preventing injury to the user.
These are manufactured from close-grained grey cast iron for long trouble free service. Accurately machined housings assure smooth sliding movement. Accurately fitted solid steel guide rods reduce wear and tear giving the vices a smooth and true parallel action, free of side or cross deflection.
Vice jaws are equipped with a "TOE -IN" feature. When fully closed, the jaws meet only at the top to provide even clamping on the whole depth of the work piece.
Square body seating provides easy fitment under the bench top so that jaws are flush with the bench top.
The steel main screw has Buttress threads for smooth, accurate and responsive adjustment.Body and sliding jaw have provision for attaching wooden liners to protect the vice,work piece and working tools.
These are available in two types:
Heavy Duty full size Workshop Vices
Manufactured in 3 capacities, these full size vices have large jaw openings making them especially useful for large sized jobs in workshops.
Home Carpenter's Vices
A range of light weight vices for the amateur home carpenter or the young woodworker, yet robust enough for the professional who needs a compact vice for smaller work.
A traditional pattern woodworking vice equipped with the quick release mechanism.Simply pressing the trigger initiates the quick action, with the front jaw sliding freely,thereby allowing large or small work pieces to be interchanged smoothly. Releasing the trigger returns the mechanism to normal for fine adjustment. A very useful feature in repititive work situations.
Vices are equipped with an adjustable front dog which when used in conjunction with a bench stop allows oversize workpieces too large to be held between the jaws, to be securely held. This useful addition provides a normal vice and a tail vice in one tool.
Manufactured from close-grained grey cast iron, these robust vices have accurately machined housings for smooth sliding movement and true parallel action free of side or cross movement.
Vice jaws are equipped with a "TOE - IN" feature. When fully closed the jaws meet only at the top to provide even clamping on the whole depth of the work piece.
The steel main screw has Buttress threads for smooth, accurate and responsive adjustment. Body and sliding jaw have provision for attaching wooden liners to protect the vice,work piece and working tools.
One of the most well designed vices by Groz, this one is really brilliant. The vice has a rapid action mechanism which is unique and different from the conventional quick release mechanism. To tighten the vice, turn the handle in the usual way. As soon as the handle is turned in the opposite direction, the screw is disengaged and the front jaw slides freely. No springs, levers or bars. A very useful feature in repititive work situation for holding different size pieces.
Manufactured from close grained grey cast iron these robust vices have accurately machined housings for smooth sliding movement and true parallel action free of side or cross movement.
Vice jaws are equipped with a "TOE-IN" feature When fully closed, the jaws meet only at the top to provide even clamping on the whole depth of the work piece.
The steel main screw has Buttress threads for smooth, accurate and responsive adjustment. Body and sliding jaw have provision for attaching wooden liners to protect the vice,work piece and working tools.
Amongst the oldest comparative measuring tools, Calipers are designed for taking transfer measurements or for comparing external and internal measurements. Dividers are used for marking on steel or for transferring measurements from master templates. Dividers points are hardened for increased wear resistance
Manufactured from high grade steel with a polished finish, the legs pivot on a roller and are tensioned by a bow spring. Measuring adjustment is via an adjusting nut that allows for fine settings. Measuring capacity/ size is the distance between the fulcrum and the end of the leg.
These are available in two types: 1.With Solid Nut.2.With Quick Nut - the threads of the split quick adjusting nut engage the screw at the slightest pressure of the leg and when the pressure is withdrawn, the nut releases itself sliding freely over the screw. This feature helps save valuable time in opening & closing when a variety of measurements have to be taken consecutively.
These rugged industrial grade compasses are manufactured from heavy gauge steel with an attractive black powder coated finish. The tip is accurately ground. Heavy Duty hinge and knurled locking nut help in convenient movement.
Used for precisely scribing arcs and circles on projects and drawings.
Made from stainless steel, these rules have a polished finish with permanently engraved clear to read graduations.
These are available in two types: Metric rules: Graduated in metric dimensions 0.5mm & mm on both edges. Imperial & Metric combined rules: These rules are graduated in metric dimensions on one edge and imperial on the other.Imperial dimensions are in 1/16th , 1/32nd & 1/64th. Metric dimensions are in 0.5mm & mm. Reverse side of the rule has a permanently engraved metric to imperial conversion table.
This range of tap wrenches are ideal for holding taps, reamers,screw extractors and other such small hand turned tools. All wrenches have a sliding T handle frictionally held, that allows these tap wrenches to be used even in confined spaces.
These are available in two types:
Regular T handle type Self-centering hardened steel jaws provide a positive grip on taps, reamers and other such small tools.
Ratchet type These tap wrenches have self centering hardened steel jaws and knurled chuck sleeve, which provide positive grip on taps, reamers and other such small tools. The ratchet can be set left or right, or direct engagement in neutral position. This feature allows them to be used in confined areas with ease.
This range of die holders is best suited for applications requiring efficient and clean cutting of external threads. Die holders have a rugged construction with heavy duty set screws that hold the die firmly in place.
These are manufactured in two types:
Type A: Acc DIN 225 These have steel bodies with chrome plated handles.
Type B: Professional quality This range of die holders have an all steel construction with black powder coated body. Handles have knurled ends, the ends being black powder coated.
A complete range of taps and dies along with suitable tap wrenches and die holders packed in strong, attractive and convenient to store boxes. Contents are housed in a well fitted insert.
Taps are used for cutting internal threads in predetermined holes.These perform best in materials where the cutting action results in chips which break up readily and do not present problems of chip disposal. Taps are usually used in sets of 3 (taper,second and bottom).
Taper Used to provide a quick & easy start, but this will not cut the thread down to the bottom of the hole.
Second Used to increase the size of cut.
Bottom Used for follow through right to the bottom to obtain full depth of thread.
As opposed to straight threads such as BSW, UNC, UNF, Metric etc; taps with parallel threads are shorter in length and are used for parallel threading. These are used in sets of 2.
Dies are used for cutting external threads.These are used as individual pieces ,the same die being passed over the job many times to obtain clean threading. Manufactured from carbon steel.
These are available in two types:
Round and Hexagonal
HEXAGONAL DIES - Also referred to as Die Nuts, these are used in the same way as Round Dies but are more resilient and can be easily tightened using a spanner.
Manufactured from Chrome Vanadium steel these are fully hardened and tempered. Specifically designed for heavy prying & fulcrum prying especially in automotive applications with the tapered end used for aligning applications.
Heavy duty double ended wheel wrenches; these are made from high grade alloy steel and have a rust preventing bright nickel plated finish. In normal course each wheel wrench is supplied complete with tommy bar, however, spare wrenches and tommy bars are also available.
An ideal combination of Brass & Aluminium makes these hammers very safe for use even in explosive environments. Brass Head does not spark and protects metal surfaces from any damage such as denting or marking during use. The Non slip aluminium handle is knurled for comfortable non-slip grip.
Drop forged from chrome vanadium steel, these are hardened and tempered and have an attractive black powder coated finish. The design incorporates a heavy duty hexagon pattern at one end with the other end being the striking end.
These are used for tightening and slackening large nuts & bolts in ship maintenance, mining, piping and industrial applications. One end is shaped to fit a nut and the other is enlarged to receive blows from a hammer. The shock of the impact is useful in breaking rust/paint.
Professional quality pliers, these are made from heavy gauge pressed steel sheet.
Punches are accurately heat treated for extended life and are exposed to a brass anvil which prevents the edges from getting damaged in use. Each punch locates exactly in position locking in place with the prawl and ratchet mechanism.
Spring loaded revolving head incorporates 6 punches of sizes 5/64" (2 mm), 3/32" (2.5 mm), 1/8" (3 mm), 9/64" (3.5 mm), 5/32" (4 mm) & 3/16" (4.5 mm).
Seller and supplier different types of steel files that includes allied industries steel files, corrosion resistant steel files, abrasion resistant steel file, precision steel files, metal files and engineering industry steel files.
Manufacturing and supplying industrial clamp that includes fabric stretching clamps, pneumatic stretching clamps and industrial fabric stretching clamps.
Processing...
