G.S.V Microtech

Uli 200 series transmitters are 3 wire type instruments. Anultrasonic wave is pulsed 5 times a second. The reflection of this pulse is received by the sensor. The time taken for the wave to travel to the object and back to the sensor is proportional to the distance of the object from the sensor. The compact size, narrow beam angle and small dead band ensures that these sensors will work reliably for small tanks.

these non-contact instruments find a variety of applications. Typical applications are measuring level of liquids in small storage tanks and diesel tanks. Other applications include conveyor line counting, web loop tension measurement, open channel flow measurement, collision detection,and more…

The cfi 200 is a extremely rugged and versatile pulse input flow indicator. These indicators can be used for a wide variety of applications where accuracy and dependability are essential. These indicators accept pulse input. Two indicator modes are available flow rate and total flow. The rate of flow is shown in line#1 and total flow in line#2. In addition, all these instruments are field programmable and have nonvolatile backup memory that does not need cumbersome batteries. These instruments also have the capability to switch on relay(s) based on user settings. These outputs can be used for process set points and alarms. These instruments are compact and can be easily mounted in a panel. These instruments have rs485 or rs 232 option for communication to pc. All the parameters are saved in a non volatile eeprom memory which doesn't needs any external battery. There is a advanced power fail feature by which even if there is any power failure the total flow reading is automatically saved to memory and resumes with the same value after power on. These meters can also be used for batch operation. Here the total volume of liquid to be measured can be programmed and the instrument can switch off a relay automatically after the required batch is complete

The cfl 300 series instruments are extremely rugged and versatile flow indicators with 4-20ma or 0-5v input. These indicators can be used for open channel flow measurement. These instruments can be factory set for measuring 4-20ma currents or 0-5vdc or 0-10vdc. The 4-20ma models have a drop of 2. 4 volts maximum. Cfl300 series flow data loggers can be used for water. These meters can also be used for line sizes from 0. 5” to 48”. Microprocessor based instrumentation ensures accurate readings for both rate of flow indication and total flow indication. A number of programmable features including in-line calibration are standard. All the parameters are saved in a non volatile eeprom memory which doesn't needs any external battery. There is a advanced power fail feature by which even if there is any power failure the total flow reading is automatically saved to memory and resumes with the same value after power on. Advanced models can offer relay outputs for signals exceeding rate of flow or total flow set points. Programmable pulse output models are also available in addition to the industry standard 4-20ma output. Cfl300 flow data logger has an rtc and external eeprom to save flow rate and total flow and time of events. A maximum of 10000 records can be saved at time intervals specified by user in program menu. Cfl300 has a direct printer interface which can print to a printer through rs232 port. This printing takes place at regular time intervals or user programmed time intervals. Advanced flow data logger can work in gsm communication mode which transmits data through gsm modem either through sms, gprs, data call or by all the three programmable by user.

ULI 200 series transmitters are 3 wire type instruments. An ultrasonicwave is pulsed 5 times a second. The reflection of this pulse is received by the sensor. The time taken for the wave to travel to the object and back to the sensor is proportional to the distance of the object from the sensor. The compact size, narrow beam angle and small dead band ensures that these sensors will work reliably for small tanks.

These non-contact instruments find a variety ofapplications. Typical applications are measuring level of liquids in small storage tanks and diesel tanks. Other applications include Conveyor line counting, Web loop tension measurement, Open Channel flowmeasurement, collision detection, and more…

These dataloggers process and send 8 channels of data to the pc. Dataloggersoftware ensures realtime display on the pc as well as storing data at userprogrammed intervals the datalogger accepts either thermocouple, rtd, 4-20ma or 0-5v inputs. Linearization software is builtin for both thermocouple as well as rtd ensuring 1 deg accuracy over the entire range.

software stores data in in industry standard database. Data is available for other software using microsoft odbc technology. The software comes builtin with historical reports and graphs and user definable reports.

the datascan10 comes standard with an easy to use, user-friendly software that requires minimal computer knowledge. The operation is intuitive and most f unctions are self explanatory.

CPI 500 instruments measure and display process parameters like Level, Pressure, Temperature, Flow, Vibration, Humidity, Wind Speed and more. These instruments accept current input and convert them to the programmed process variable. Settings are saved in non-volatile memory and no battery backup is required. The user can program two independent display modes. Typical applications include Level and Volume display in the same instrument.

These instruments also have the capability to switch on relay based on user settings. These outputs can be used for process set points and alarms, and for controlling pumps. These instruments are panel mount instruments.

ERO100 controllers are the complete solution to your small RO plant. This controller controls the Raw water pump, High Pressure pump, Dosing Pump and Flushing Solenoid. It also has a built-in conductivity meter. The controller also takes in inputs from key sensors like LP switch, HP switch, Product level switch, and a user defined trip input. The controller also continuously monitors phase voltages, phase currents and imbalances. This ensures that your plant trips for unbalanced voltages or excessive currents. These controllers come in compact 96x96x110mm panel mount enclosure and have builtin relays to drive upto 5HP High pressure pumps.

Clear LED indication combined with process status indicates the plant status and alarm conditions. This easy to use controller is a must for all your small RO plants.

Cwd 100 prepaid water meter are extremely rugged and can be used with pulse output flow sensors. The instrument calculates the total flow and constantly checks for the remaining volume that can be transferred. Once the preset volume is transferred the instrument activates a motorized valve shutting off the line. The volume of water to be transferred can be loaded by means of a prepaid card. Once the card is inserted and removed the balance remaining in the card is transferred to the instrument and the balance in the card reduced to zero. Once charged the motorized valve is held open until the balance is exhausted

the volume of water that the customer has charged and all other parameters are stored in non-volatile memory that is protected from external access. This means that user cannot tamper with this data by any means.

Cci 100 series conductivity meters are extremely versatile conductivity meters that can be used for a wide variety of applications. These meters offer extreme reliability and low cost for conductivity measurement

cci 100 series conductivity meters can be used for water and water like liquids including acids and alkalis. These meters can also be used for any line size. Microprocessor based instrumentation ensures accurate readings for conductivity, tds and temperature. A number of programmable features including inline calibration are standard features. All models offer relay outputs with user programmable set points. Industry standard 4-20ma output is also available on select models. All models offer comprehensive equalizations for temperature variations. Cci 100 includes a built-in electronic temperature sensor with an accuracy of +-1 c. This temperature can be viewed on the display whenever needed. The user can also program the equalization factor which is in the following format

cci 200 series conductivity meters are extremely versatile conductivity meters that can be used for a wide variety of applications. These meters offer extreme reliability and low cost for conductivity measurement.

cci 200 series conductivity meters can be used for water and water like liquids including acids and alkalis. These meters can also be used for any line size. Microprocessor based instrumentation ensures accurate readings for conductivity, tds and temperature. A number of programmable features including inline calibration are standard features. All models offer relay outputs with user programmable set points. Industry standard 4-20ma output is also available on select models. All models offer comprehensive equalizations for temperature variations. Cci 200 includes a built-in electronic temperature sensor with an accuracy of +-1 c. This temperature can be viewed on the display whenever needed. The user can also program the equalization factor which is in the following format

CPI 300D instruments are Dual Channel Differential Reading instruments.

CPI 300D measure and display process parameters like level, Pressure, Temperature, Flow, Vibration, Humidity, Wind Speed and more.

These instruments accept a voltage or current input and convert them to the programmed process variable

Settings are saved in non-volatile memory and no battery backup is required.

The user can program two independent display modes. Typical applications include Level and Volume display in the same instrument

These instruments also have the capability to switch on relay(s) based on user settings. These outputs can be used for process set points and alarms, and for controlling pumps. These instruments are panel mount

Optional features includes: RS485 / MODBUS network protocol, Upto 2 relays can be programmed using 4 setpoints and current output of 4-20mA.

Cfl100 series flow meters are extremely versatile flow meters that can be used for a wide variety of applications. These meters offer extreme reliability and low cost for flow measurement and logging. Cfl100 series flow data loggers can be used for water. These meters can also be used for line sizes from 0. 5” to 48”. Microprocessor based instrumentation ensures accurate readings for both rate of flow indication and total flow indication. A number of programmable features including in-line calibration are standard. All the parameters are saved in a non volatile eeprom memory which doesn't needs any external battery. There is a advanced power fail feature by which even if there is any power failure the total flow reading is automatically saved to memory and resumes with the same value after power on. Advanced models can offer relay outputs for signals exceeding rate of flow or total flow set points. Programmable pulse output models are also available in addition to the industry standard 4-20ma output. Cfl100 flow data logger has an rtc and external eeprom to save flow rate and total flow and time of events. A maximum of 10000 records can be saved at time intervals specified by user in program menu. Cfl100 has a direct printer interface which can print to a printer through rs232 port. This printing takes place at regular time intervals or user programmed time intervals. Advanced flow data logger can work in gsm communication mode which transmits data through gsm modem either through sms, gprs, data call or by all the three programmable by user.

Cfi100 series flow meters are extremely versatile flow indicators that can be used with a variety of pulse output flow sensors. These indicators offer extreme reliability and low cost for flow measurement. Cfi100 series flow indicators can be used with mv pulse output sensors, open collector pulse output sensors as well as ttl pulse output sensors. Microcontroller based electronics ensures accurate readings for both rate of flow indication and total flow indication. A number of programmable features including in-line calibration are standard. All the parameters are saved in a non volatile eeprom memory which doesn't needs any external battery. There is a advanced power fail feature by which even if there is any power failure the total flow reading is automatically saved to memory and resumes with the same value after power on. Advanced models can offer relay outputs for signals exceeding rate of flow or total flow set points. Programmable pulse output models are also available in addition to the industry standard 4-20ma output. These instruments can be connected to a pc via rs485/ rs 232 using modbus interface.

The cfi 300 series instruments are extremely rugged and versatile flow indicators with 4-20ma or 0-5v input. These indicators can be used for open channel flow measurement. These instruments can be factory set for measuring 4-20ma currents or 0-5vdc or 0-10vdc. The 4-20ma models have a drop of 2. 4 volts maximum. In addition, all these instruments are field programmable and have nonvolatile backup memory that does not need cumbersome batteries. These instruments also have the capability to switch on relay(s) based on user settings. These outputs can be used for process set points and alarms. There is a advanced power fail feature by which even if there is any power failure the total flow reading is automatically saved to memory and resumes with the same value after power on. These instruments can be connected to a pc via rs485/ rs 232 using modbus interface

These are intelligent level controllers that are suitable for both industry and commercial applications. These controllers can take in 4-20ma from a variety of sensors. These controllers can give powersupply to transmitters and also indicate sensor failure(with certain type of sensors). Clear 16 character lcd backlit display indicates both level and volume. Pump can be controlled for a variety of applications using builtin relay.

these controllers are housed in attractive housing that can be either panel mounted or wall mounted.

Cpi 100 instruments measure and display process parameters like level, pressure, temperature, flow, vibration, humidity, wind speed and more.

these instruments accept a voltage or current input and convert them to the programmed process variable

settings are saved in non-volatile memory and no battery backup is required. The user can program two independent display modes. Typical applications include level and volume display in the same instrument.

these instruments also have the capability to switch on relay(s) based on user settings. These outputs can be used for process set points and alarms, and for controlling pumps. These instruments are panel mount instruments.

Cpi 300 instruments measure and display process parameters like level, pressure, temperature, flow, vibration, humidity, wind speed and more.

these instruments accept a voltage or current input and convert them to the programmed process variable

settings are saved in non-volatile memory and no battery backup is required. The user can program two independent display modes. Typical applications include level and volume display in the same instrument

these instruments also have the capability to switch on relay(s) based on user settings. These outputs can be used for process set points and alarms, and for controlling pumps. These instruments are panel mount instruments.

The ORP 100 series instruments are extremely rugged and versatile ORP indicators. The display units can be programmed to a user defined value based on a straight line equation or a 16 point lookup table.ORP 100 instruments use a special high input impedance input stage for fast and accurate

ORP measurement. Special electronics ensure that the input impedance is in excess of 1012 ohms. This ensures that there is minimum error due to the extremely high output impedance of the ORP sensors. All these instruments are field programmable and have nonvolatile backup memory that does not need cumbersome batteries. These instruments also have the capability to switch on relay(s) based on user settings.

Automatic calibration is provided for fast field calibration. Optional features include RS485 with MODBUS network capabilities. Optional 4-20mA output can be programmed between any desired range.

Ft 200 series flow meters are extremely versatile flow meters that can be used for a wide variety of applications. These meters offer extreme reliability and low cost for flow measurement. Ft 200 series flow meters can be used for water and water like liquids. These meters can also be used for line sizes from 0. 5” to 48”. Microprocessor based instrumentation ensures accurate readings for both rate of flow indication and total flow indication. A number of programmable features including in-line calibration are standard. Advanced models can offer relay outputs for signals exceeding rate of flow or total flow set points. Industry standard 4-20ma output is optionally available. These instruments are field programmable and doesn't needs any special instruments for calibration. All variables and program parameters are programmable through key pad provided in the instrument. In addition, these meters have rs485 or rs232 mode of communication to pc through modbus protocol. All the parameters are saved in a non volatile eeprom memory which doesn't needs any external battery. There is a advanced power fail feature by which even if there is any power failure the total flow reading is automatically saved to memory and resumes with the same value after power on ft200 is available in a ip65 enclosure with field mount, panel mount, pipe mount as well as wall mount options.

Cph 100 instruments use a special high input impedance input stage for fast and accurate ph measurement. Special electronics ensure that the input impedance is in excess of 1012 ohms. Thisensures that there is minimum error due to the extremely high output impedance of the ph sensors.

since ph is a function of temperature a pt100 rtd type input is provided for temperature measurement. Temperature compensation can be programmed for each 5 deg segments. Relay output sare provided for a larm indication as well as control action.

automatic calibration is provided for fast field calibrationoptional features. Include rs485 with modbus networkcapabilities. Optional 4-20ma output can be programmed between any desired

Cpl100 instruments measure and display process parameters like level, pressure, temperature, flow, vibration, humidity, wind speed and more.

cpl100 has real time clock and internal eeprom which stores the level and volume to external eeprom at time intervals specified by the user. Saves a maximum of 10000 records (level , volume ,time and date of event occurrence).

cpl100 has rs-232 output for gsm connectivity which is compatible for sim300 gsm communication to central monitoring station through gprs, data call, short message service.

here user can program 10 phone numbers to which data will be sent through sms also user can demand the controller for the present values whenever necessary by sending a sms to the controller for which the controller in turn replies with the values

these instruments accept a voltage or current input and convert them to the programmed process variable.

these instruments also have the capability to switch on relay(s) based on user settings. These outputs can be used for process set points and alarms, and for controlling pumps. These instruments are panel mount instruments

optional features includes: upto 2 relays can be programmed using 4 setpoints and current output of 4-20ma.

ro-pro controllers are the complete solution to your automated ro plant. This controller controls the raw water pump, high pressure pump, dosing pump, cleaning pump and flushing solenoid. It also has a hooter to indicate alarms. The controller also takes in inputs from key sensors like lp switch, hp switch, conductivity controllers, ph controllers, orp controllers, inlet level switch, product level switch, dosing level switch and more. The controller also continuously monitors phase voltages, phase currents, phase reversal and imbalances. This ensures that your plant trips for unbalanced voltages or excessive currents. Further these controllers can talk to our motorized multiport valves over a rs485 connection to control these valves.

ro-pro can also differentiate between permanent alarms and temporary alarms. Ro-pro restarts the plant after the temporary alarm condition, without any human interference. The controller trips the plant after a permanent alarm condition. User has to necessarily clear the permanent alarm condition before the controller can proceed.

ULI 500 series instruments are blind transmitters. An ultrasonicwave is pulsed 5 times a second. The reflection of this pulse is received by the sensor. The time taken for the wave to travel to the object and back to the sensor is proportional to the distance of the object from the sensor. The compact size, narrow beam angle and small dead band ensures that these sensors will work

reliably for small tanks. These sensors are aggressively priced and are comparable to mechanical level switches for the same tank size.

These non-contact instruments find a variety of applications.Typical applications are measuring level of liquids in small storagetanks and diesel tanks. Other applications include Conveyor line counting, Web loop tension measurement, Open Channel flow measurement, collision detection, and more…

Cpi 300w instruments measure and display process parameters like level, pressure, temperature, flow, vibration, humidity, wind speed and more.

these instruments accept current input and convert them to the programmed process variable. Settings are saved in non-volatile memory and no battery backup is required. The user can program two independent display modes. Typical applications include level and volume display in the same instrument. These instruments also have the capability to switch on relay(s) based on user settings. These outputs can be used for process set points and alarms, and for controlling pumps. These instruments are wall mount instruments.

optional features includes: rs485 / modbus network protocol, upto 2 relays can be programmed using 4 setpoints and current output of 4-20ma.

This instrument accepts one RS232 input and communicates to a single multidrop RS485 line. This instrument works with baud rate of 9600(bits per second).

This unit is available in a DIN Rail mount enclosure and accepts 230V power supply. This instrument is specially isolated between RS-232 and RS485 to prevent damage for both PC and slave instrument. The instrument accepts query from RS232 channel, and sends the message to the RS485 channel though a powerful driver. The result to the query from the RS485 channel is sent to RS232 channel at 9600 baud rate.

The buffer size is limited to 500 bytes for the input query. Message queuing is not implemented and user has to communicate one query at a time.

Accurate three phase power measurement using state of the art energy measurement chips. Voltages and current measured using in-built transducers. Power measurement chip features high accuracy and conforms to IEC 61036 and IEC 61268 standards.

Easy calibration of instrument using front keys. RS485 models ensure remote monitoring and calibration. Scalable voltage / current input.

PC Datalogger software logs all parameters. Reports of historical data and trends. Multicolor graphs, real time graphs for all variables. Automatic update of reports to the internet.

AC200 is controller for water cooled air conditioners. This instrument monitors the conductivity of water. The water is flushed out when the conductivity crosses a specified set point. This instrument has 4 digit LED display and two keys for programming. Programmable relay outputs for water flushing and fill controlling. AC200 continuously monitors compressor ON time. Water flushing time can be programmed by user. AC200 flushes out the water based on conductivity or time or both (programmable in the instrument.AC200 monitors temperature , water level and conductivity and displays each parameter in the LED display.