G. T. M. Seals Private Limited

We provide a precision engineered range of Hydraulic Seals – Piston Seals that fits tightly in the groove to provide effective sealing attributes. These can be used for applications where the physical properties of normal and fabric reinforced elastomers are insufficient. Our range of hydraulic seals is fabricated using quality rubber fabricated from reliable vendors to ensure maximum satisfaction of our clients.

Advantages

• Unusually high abrasion resistance
• Insensibility against shock loads and pressure peaks
• High resistance against extrusion
• Low compression set
• Suitable for the most severe working conditions
• Easy installation

Technical Data

Operating Conditions

• Pressure: CPU: 40mpa, TPU: 31.5mpa
• Temperature: -35o +110°c
• Speed: 0.5 m/s
• Media: hydraulic oils (mineral oil-based)
  

Material

• Material: CPU/TPU
• Hardness: 90-95 shore A
• Color: Blue and green 

We are involved in manufacturing and supplying quality range of Hydraulic Rods and Piston Seal Copy that is available in standard as well as customized specifications. Our collection of hydraulic rods and piston seals helps in avoiding dry run due to excess oil gathered under the seal. These are accurately designed for the sealing of piston rods. These are easy to install and remove and long service life. We can deliver these in both standard and customized configurations.

We manufacture a quality range of Hydraulic Seals – Rod Seals that is available in standard as well as customized specifications. These are lip seal with a secondary sealing lip and tight fit at the outer diameter. Our range of hydraulic seals – rod seals helps in avoiding wear and dry run due to additional lubricant retained under the seal by the secondary lip. These are precisely designed for the sealing of piston rods and plungers in heavy duty applications in mobile and stationary hydraulics.

Advantages

• Unusually high wear resistance
• Insensibility against shock loads and pressure peaks
• High resistance against extrusion
• Low compression set
• Suitable for hardest working conditions
• Sufficient lubrication due to pressure medium between the sealing lips
• Increased sealing performance at zero pressure
• Air penetration from outside is largely prevented
• Easy installation

Technical Data

Operating Conditions

• Pressure: CPU: 40mpa, TPU: 31.5mpa
• Temperature: -35o +110°c
• Speed: 0.5 m/s
• Media: hydraulic oils (mineral oil-based)

Other Specifications

• Material: CPU and TPU
  
• Hardness: 90-95 shore A
• Color: blue

We offer a comprehensive range of Hydraulic Seals-Piston/Rod Seals UNS/UHS that is used for both piston seal and rod seal. These offer high sealing performance under low temperature and can be easily installed. Our range of hydraulic seals is available in various colours such as blue, green, light yellow and natural brown. These can also be customized as per the diverse requirements of our clients.

Technical Data

Operating Conditions

• Pressure: CPU: 31.5 mpa, TPU: 21 mpa
• Temperature: -35o +80°c
• Speed: 0.5m/s
• Media: hydraulic oils (mineral oil-based)

Other Specifications

• Material: CPU/TPU
• Hardness: 90-95 shore A
• Color: Blue and Green
  

We are top-notch manufacturers of PTFE - Piston Seals that is a combination of a slipper seal and an energizing o-ring. These are fabricated with an intrusion fit which together with the grip of the o-ring ensures a good sealing effect even at low pressure. Our range of PTFE - piston seals works perfectly as double acting piston seals of hydraulic components such as injection molding machines, machine tools, presses, excavators, forklifts & handling machinery, agriculture equipment, valves for hydraulic & pneumatic circuits.

Advantages

• High abrasion resistance
• No stick-slip effect when starting for smooth operation
• Minimum static and dynamic friction coefficient for a minimum energy loss and operating temperature
• No adhesive effect to the mating surface during long period of inactivity or storage
• Easy installation

Technical Data

Operating Conditions

• Pressure: 40mpa
• Temperature: -35o +200°c (depending on o-ring material)
• Speed: 4 m/s
• Media: almost all media

Material

• Slipper seal: PTFE
• O-ring: NBR/FKM
• Hardness: 90-95 shore A
  

We are involved in providing an extensive range of PTFE Copy which is manufactured with best grade of raw material using sophisticated technologies. These PTFE materials are widely used for various applications and are available at reasonable prices in the market. We ensure high quality and effective performance products in accordance to International and global norms. We also customize these products to suit the requirement and specification of our customers.

We deal with manufacturing and supplying UHS-UNS Copy. We customize these products as per the specification and requirements of our clients. We ensure excellent quality is maintained and also take care of customer satisfaction. Our range of copy is available in several size and shape. We also offer them in different colors like yellow, blue, green and natural brown. We manufacture these products using high quality raw material.