These extra heavy duty lathe machines are available in well-polished horizontal construction and are well recognized owing to their excellent functionality with fuel efficiency standards.
High Tensile Casting
Latest Design Head Stock
Hardened & Ground Bed & Spindle Stand Accessories:
Check Plate Change Gear Set, Center Adaptor, Two Nos. Dead Centers, Dial Indicator Square Tool Post Tool Post Key Feed Gear Box.
Specification -
* Bed Length 1675 to 12000 mm
* Bed Width 324 mm
* Height of Center 250 / 300 mm
* Admit Between Center 525 to 10850 mm
* Swing Over Bed 500 / 600 mm * Swing Over Cross Slide 275 / 375 mm
* Cross Slide Travel 250 / 300 mm
* Length of Gap in Bed 200 mm
* Swing over Gap 810 / 910 mm
* Compound Slide Travel 125 mm
* Spindle Sleeve (Taper Bore) MT-4
* Spindle Bore 50 to 100 mm * Taper Bore in Center Sleeve MT-4
* Ram Travel 175 mm
* No. of Speeds 8 Range (RPM) 25 to 500
* Lead Screw Diameter & Pitch 38.1mm / 4TPI * Metric Threads & Range (1 to 6 mm pitch) 13 Inch
* Threads & Range (2 to 24 TPI) 19
* Motor (1440 R.P.M. / 440V. / AC-3 Phase) 2 H.P. to 5 H.P.
These extra heavy duty lathe machines are available in well-polished horizontal construction and are well recognized owing to their excellent functionality with fuel efficiency standards.
High Tensile Casting
Latest Design Head Stock
Hardened & Ground Bed & Spindle Stand Accessories:
Check Plate Change Gear Set, Center Adaptor, Two Nos. Dead Centers, Dial Indicator Square Tool Post Tool Post Key Feed Gear Box.
Specification -
* Bed Length 1675 to 12000 mm
* Bed Width 324 mm
* Height of Center 250 / 300 mm
* Admit Between Center 525 to 10850 mm
* Swing Over Bed 500 / 600 mm * Swing Over Cross Slide 275 / 375 mm
* Cross Slide Travel 250 / 300 mm
* Length of Gap in Bed 200 mm
* Swing over Gap 810 / 910 mm
* Compound Slide Travel 125 mm
* Spindle Sleeve (Taper Bore) MT-4
* Spindle Bore 50 to 100 mm * Taper Bore in Center Sleeve MT-4
* Ram Travel 175 mm
* No. of Speeds 8 Range (RPM) 25 to 500
* Lead Screw Diameter & Pitch 38.1mm / 4TPI * Metric Threads & Range (1 to 6 mm pitch) 13 Inch
* Threads & Range (2 to 24 TPI) 19
* Motor (1440 R.P.M. / 440V. / AC-3 Phase) 2 H.P. to 5 H.P.
These extra heavy duty lathe machines are available in well-polished horizontal construction and are well recognized owing to their excellent functionality with fuel efficiency standards.
High Tensile Casting
Latest Design Head Stock
Hardened & Ground Bed & Spindle Stand Accessories:
Check Plate Change Gear Set, Center Adaptor, Two Nos. Dead Centers, Dial Indicator Square Tool Post Tool Post Key Feed Gear Box.
Specification -
* Bed Length 1675 to 12000 mm
* Bed Width 324 mm
* Height of Center 250 / 300 mm
* Admit Between Center 525 to 10850 mm
* Swing Over Bed 500 / 600 mm
* Swing Over Cross Slide 275 / 375 mm
* Cross Slide Travel 250 / 300 mm
* Length of Gap in Bed 200 mm
* Swing over Gap 810 / 910 mm
* Compound Slide Travel 125 mm
* Spindle Sleeve (Taper Bore) MT-4
* Spindle Bore 50 to 100 mm
* Taper Bore in Center Sleeve MT-4
* Ram Travel 175 mm
* No. of Speeds 8 Range (RPM) 25 to 500
* Lead Screw Diameter & Pitch 38.1mm / 4TPI
* Metric Threads & Range (1 to 6 mm pitch) 13 Inch
* Threads & Range (2 to 24 TPI) 19
* Motor (1440 R.P.M. / 440V. / AC-3 Phase) 2 H.P. to 5 H.P. STANDARD
Our planner machine and heavy duty planner is available in all the shapes and sizes. They can perform any heavy duty on any given day. In addition, planner machine and other machinery are available at the least rates. We are one of the leading planner machinery manufacturers and suppliers in India.
Construction of the Machine Design:
It is a very double rigid column and body b ore system planner fitted with ball bearings. The Bed: The be is of deep box section type and is tied together at frequent intervals by double walled bridge pieces extending to the bottom of the bed. The Table: It is of box section type and is streamlined with hand scraped 'V' way to bear heavy load. It is heavily ribbed and the Rack provided in it is acurately machines and milling cut. The Bearings: The main bearings for the Gearings are cast solid with the Bed. Thea Gears Teeth are hobbing machine cut Except two gears are helical. Gun metal bearings have been provided for all the shaft and loose pulleys. Taper roller bearings can also be provided instead of Gun metal bushes. The Cross Rail: This is of Box section type with large surface. It is suitable for both hand and mechanical drive. Tool Posts: These are manufactured out of close grain alloy castings and steel to stand heavy cut. These can be driven both manually and mechanically. The Uprights: The uprights are of rigid box section type. keyed firmly, bolted on to bed and are capable of absorbing the heaviest shocks without vibration, Extra pins are provided to re-fit the machine accurately after once it is dismantled. The Drive: The machine is arranged for direct individual as well as two belt drive Accessories: Automatic lifting arrangements of cross rail.
Our planner machine and heavy duty planner is available in all the shapes and sizes. They can perform any heavy duty on any given day. In addition, planner machine and other machinery are available at the least rates. We are one of the leading planner machinery manufacturers and suppliers in India. Construction of the Machine Design: It is a very double rigid column and body b ore system planner fitted with ball bearings. The Bed: The be is of deep box section type and is tied together at frequent intervals by double walled bridge pieces extending to the bottom of the bed. The Table: It is of box section type and is streamlined with hand scraped 'V' way to bear heavy load. It is heavily ribbed and the Rack provided in it is acurately machines and milling cut. The Bearings: The main bearings for the Gearings are cast solid with the Bed. Thea Gears Teeth are hobbing machine cut Except two gears are helical. Gun metal bearings have been provided for all the shaft and loose pulleys. Taper roller bearings can also be provided instead of Gun metal bushes. The Cross Rail: This is of Box section type with large surface. It is suitable for both hand and mechanical drive. Tool Posts: These are manufactured out of close grain alloy castings and steel to stand heavy cut. These can be driven both manually and mechanically. The Uprights: The uprights are of rigid box section type. keysed firmly, bolted on to bed and are capable of absorbing the heaviest shocks without vibraion, Extra pins are provided to re-fit the machine acurately after once it is dismantled. The Drive: The machine is arranged for direct individual as well as two belt drive Accessories: Automatic lifting arrangements of cross rail.
N. D. Enterprises, Airoli Manufacturer and supplier of CNC machined components that includes pinion, corrosion resistance pinion, precision engineered pinion, abrasion resistance pinion and high tensile pinion.
Processing...
