Electrical Resistors & Rheostats

Our clients can avail from us high-grade Wire-wound Rheostats, Hand Sliding Type, which are manufactured using optimum quality raw material and latest technology machines. Some of the components of our products are as follows:

Guide Rod : this is made of solid driven brass rod, which is bright chrome plated squire.

Winding Wires : Eureka wire is used for low value and nichrom wire 80/20 grade is used for higher value.

Temperature rise : 200^oC above ambient temperature.

End supports : Aluminum brackets are painted.

Terminals : Chrome plated brass nuts and screws one at each end of Leaneer Type Wire-Wound Resistor and the third one at both ends of the guide rod.

All the electrical connectors are made out of chrome plated brass material.

We are manufacturing optimum quality Riteohms Wire Wound Resistors, which are appreciated for their reliability and durability. With the help of latest technology machines and under strict quality control, we have come up with an innovative range of products. Our products are 'riteohms' wire wound tubular silicon coated.

Some of the features of our products are as follows:

• Low temperature co-efficient
• Low Surface temperature
• Brackets available for Horizontal as well as vertical mountings
• Exceptional Stability & Performance

Some of the specifications are as follows:

• Ohmic Range 0.01 to 500K ohms

• Tolerance ± 0.5%, 1%, 5%

• 10%, Power Rating 0.5 W to 5000 W
  
  Good quality nickel-chrome and copper nickel Alloy wires are used for the purpose of wire & winding mechanically uniform, tension and required spacing. Single, Double Multiple Grade and Non-Inductive.

The range of our products include the following:

• Mat Resistors
• Fiber Card Resistors
• Mica Resistors
• Ceramic Encased
• Non-Inductive Resistors
• Edge Wound Resistors
• Tubular Resistors

The rating, which is given for each type of Resistor is based on the continuous duty service in free air and is regarded a value for a single resistor mounted in these conditions, there will be a temperature rise of 300^oC for vitreous enameled and 200^oC for silicon coated resistors.

We are manufacturing quality Dynamic Breaking Resistor, also known as “ROHMS”, which is an 'SS' type resistor. These are manufactured using stainless steel (AISI 304). In order to alter the resistance value between each step there is a tapping at each grid. The required grids are put in the series to get the desired ohmic value. Assembly has mica insulated steel rods with mica washers, which forms a stack. This stack can be mounted on a panel or steel rod is bolted on both the sides.

Some of the features of our products are as follows:

• Temperature co-efficient of 0.094% per deg C
• Wire formed grids
• Rust resistance
• Unbreakable
• Light weight

Our clients can avail from us high-grade Motor Starting Resistors, which is fabricated using quality raw material. Our products have high terminal capacity grooved ceramic former, open type winding, phosphorus bronze adjustable brands and open type welding. There are assemblies of resistors with switches and terminals, mounted in aircooled enclosures. Our Heat Sink Type is manufactured in the ranges of 5 watt to 250 watt.

Some of the features of our products are as follows:

• Durability
• Efficiency
• Low maintenance

We are one of the prominent manufacturers and exporters of Aluminum Housed Braking Resistors. These are fabricated using high-grade raw material and modern machines. Our products can also be customized according to the requirements of our clients and some of the features of our products are as follows:

• Specially designed for DBR applications.& other uses
• High Power to Size Ratio
• Small and Sleek design. Can easily be mounted in conjusted control panels
• Excellent short term overload capacity
• High Temperature Resisting Hard Anodising Aluminum Housing
• High power ratings can be achieved by multiplying individual resistors to form DBR banks
• 7NON-INDUCTIVE types available

Some of the specifications are as follows:

• Power Rating up to to 1200 Watts in Single Module
• Ohmic Value 0.1Ω to 10KΩ
• Temperature Co-efficient ±50ppm/ºC to ±200ppm/ºC
• Ohmic Tolerance standard ±5%. Closer Tolerances Available
• Insulation Resistance >2000MΩ at 500V A.C
• Dielectric Strength 2kV A.C for 1 Minute
• Overload 5X for 5 seconds