 |
|
Laboratory Heating EquipmentS
|
|
Laboratory Heating Equipment |
| | Laboratory Heating Mantle - Outer body is made of mild steel sheet. Thick fiberglass cloth is used for the inner surface. Glasswool is used for insulation. Heaters are of Nichrome 80/20, and are carefully designed to provide uniform surface temperature of up to 450OC. Flexible and elastic heating elements ensure close contact with the flask surface, minimizing tilting or breakage of glassware. Heating mantles are electrically operated at 230 Volts, AC, Single phase, 50 Hz supply.
- Temperature controlled by Energy Regulator / Capillary Thermostat
| Model Code | Flask Size | Rating | | HHM-1 | 50ml | 60 W | | HHM-2 | 100ml | 60 W | | HHM-3 | 250ml | 150 W | | HHM-4 | 500ml | 200 W | | HHM-5 | 1 Lt. | 300 W | | HHM-6 | 2 Lt. | 450 W | | HHM-7 | 3 Lt. | 450 W | | HHM-8 | 5 Lt. | 600 W | | HHM-9 | 10 Lt. | 2 x 500 W | | HHM-10 | 20 Lt. | 3 x 600 W | | HHM-11 | 50 Lt. | 6 x 600 W | | HHM-12 | 100 Lt. | 6 x 900 W | |
| | Laboratory Hot Plate - Thick mild steel body. Plate made of cast iron.
- Temperature controlled by energy regulator / capillary thermostat.
- Electrically operated at 230Volts AC, Single Phase 50 Hz.
| Round Model | | Model Code | Size (dia) | Rating | | HHPC - 8 | 20 cm. | 8 inch | 1 kW | | HHPC - 9 | 23 cm. | 9 inch | 1 kW | | HHPC - 10 | 25 cm. | 10 inch | 1.5 kW | | HHPC - 12 | 30 cm. | 12 inch | 1.5 kW | | Rectangular Model | | Model Code | Size (L x B) | Rating | | HHPC – 1012 | 25 x 30cm. | 10 x 12 inch | 1 kW | | HHPC – 1016 | 25 x 40cm. | 10 x 16 inch | 1 kW | | HHPC – 1218 | 30 x 45cm. | 12 x 18 inch | 1.5 kW | | HHPC – 1824 | 45 x 60cm. | 18 x 24 inch | 1.5 kW | |
| | Laboratory Water Bath - Concentric ring on hole of dia 7.5cm.
- Electrically operated at 230Volts AC, Single Phase 50 Hz.
- Available in single and double walled construction.
- Temperature controlled by energy regulator / capillary thermostat.
| Round Model | | Model Code | Flask Size | Rating | | HWRF – 2 | 2 Lt. | 1 kW | | HWRF – 5 | 5 Lt. | 1.5 kW | | HWRF - 10 | 10 Lt. | 2 kW | | HWRF - 20 | 20 Lt. | 2 kW | | Rectangular Model (Thermostatic) | | Model Code | Size (L x B x H) | No. of Holes | Rating | | HWB - 6 | 35 x 25 x 10cm | 6 | 1 kW | | HWB - 12 | 40 x 30 x 10cm | 12 | 2 kW | |
| | Laboratory Hot Air Oven - Temp. Range 50 - 250 Deg.C.
- Temperature is controlled by a capillary thermostat.
- Double wall construction, outer wall made of mild steel and chamber made of Mild / Stainless Steel, Glass wool insulation in between walls, Insulated door with brass hinges and ball catch lock. Heating elements at the bottom of the chamber. Electrically operated at 230Volts AC, Single Phase 50 Hz.
| Model Code | Chamber Size (H x W x D) | Shelves | Rating | | HLO - 30 | 30x30x30cm | 1 | 700 W | | HLO - 35 | 35x35x35cm | 2 | 750 W | | HLO - 45 | 45x45x45cm | 2 | 1.2 kW | | HLO - 54 | 60x45x45cm | 3 | 1.7 kW | | HLO - 60 | 60x60x60cm | 3 | 2 kW | | HLO - 65 | 90x60x45cm | 3 | 2.5 kW | | HLO - 90 | 90x60x60cm | 3 | 2.5 kW | |
| | Laboratory & Industrial Furnaces - Outer body is made of thick Mild Steel sheet. Furnace is lagged with ceramic wool and hysil blocks for insulation. A thermal fuse is provided to cut off in the event of chamber temperature rising above set temperature, thus saving the heating element from burning off. A control box made of mild steel, is fitted on the right side top of the furnace. It consists of indicating lamps, On/Off switch, contactor, fuse and digital temperature controller along with Cr/Al thermocouple sensor.
- Muffle Furnace : Maximum Temperature – 950 OC
- Heating elements are made of Nichrome 80/20, made into spirals and wound on a ceramic muffle.
| Model Code | Chamber Size | Rating | | HMF-4 | 23 x 10 x 10 cm | 1.6 kW | | HMF-5 | 25 x 13 x 13 cm | 2.6 kW | | HMF-6 | 30 x 15 x 15 cm | 3.3 kW | - Refractory Furnace : Maximum Temperature – 1200 OC
- Heating elements are made of Kanthal A1, made into spirals and inserted through the refractory holes provided on all 4 sides of the chamber.
| Model Code | Chamber Size | Rating | | HRF-4 | 23 x 10 x 10 cm | 2 kW | | HRF-5 | 25 x 13 x 13 cm | 3 kW | | HRF-6 | 30 x 15 x 15 cm | 3.5 kW | | HRF-7 | 45 x 23 x 23 cm | 6 kW | |
| | Laboratory Soxhlet Extraction Mantles - Electrically operated. Consists of a rectangular box, housing the heating elements and built-in controls. The flexible and elastic heating elements ensure close contact with the flask and even distribution of heat over the entire surface, which minimizes the breakage of glassware. Glasswool insulation is provided to minimize the heat loss.
- Capacity : 100 to 300ml Flasks.
- Supplied with Rods (3Nos)
- With single energy regulator for controlling all heaters
| Model Code | No. Of Heaters | Rating (total) | | HSEH - 4 ER-1 | 4 Heaters | 500 W | | HSEH - 6 ER-1 | 6 Heaters | 750 W | - With individual energy regulator for controlling all heaters
| Model Code | No. Of Heaters | Rating (total) | | HSEH - 4 ER-4 | 4 Heaters | 500 W | | HSEH - 6 ER-6 | 6 Heaters | 750 W | |
| | Laboratory Water Stills (Automatic) - Used for obtaining pyrogen free distilled water.
- Made of Stainless Steel. Electrically operated at 230Volts,
- Single Phase AC, 50Hz.
| Model Code | Output (approx) | Rating | | HWS-2 | 2 Lt. / Hour | 1.5 kW | | HWS-4 | 4 Lt. / Hour | 3.3 KW | | HWS-6 | 6 Lt. / Hour | 4.5 kW |
Tabletop Type:- | Model Code | Output (approx) | | HTWS-2 | 2 Lt. / Hour | | HTWS-4 | 4 Lt. / Hour | | HTWS-6 | 6 Lt. / Hour | | HTWS-8 | 8 Lt. / Hour | | HTWS-10 | 10 Lt. / Hour | | HTWS-20 | 20 Lt. / Hour | |
|
