We design and supply a precision made range of distillation columns that are used in various industrial applications. Fabricated using quality assured stainless steel and carbon steel, these distillation columns are designed as per ASM E Section VIII Div. 1 having diameter up to 3.5 meters and length in accordance to the suitable field joints.

Our collection of heat exchangers is designed by our expert technicians in accordance to the TEMA/.ASME/IS standards. Constructed using fine quality raw material such as carbon steel, stainless steel, copper and brass, these heat exchangers are supplemented with a capacity of up to 200 M2 surface area. Some of the details of these heat exchangers are:

• Tube sheet drilling on CNC or Radial Drilling Machine
  
• Tube Expansion - Electronic Torque Controller
  
• Tube/Tube Sheet Welding Manual by TIG Welding Testing - Hydro/Pneumatic or by Helium
  

We have in store for our clients, an industry verified assortment of copper distillation column, which are designed by our technocrats in various specifications and grades. Manufactured using qualitative raw materials these copper distillation columns are offered in customization form as per the specific requirements of clients.

We offer an industrially apt assortment of venturi scrubbers that are used to reduce the contamination level of flue gas in any industry where the concentration of particulate matter or gaseous pollutant is high. Having the ability to remove both particulate matter and gaseous pollutant up to 99%, these venturi scrubbers scrub the flue gas at high speed and pressure thereby dropping the gas velocity at the separator.

These high performance systems are constructed using varied types of raw material depending on the composition and temperature of the flue gases entering the system. If the flue gases are rich in SOx and NOx then high-grade stainless steel such as SS-316 is used. We offer exemplary installation services in base metal refining sectors where aluminum and copper scraps are refined at high temperature.

We specialize in manufacturing and supplying a qualitative array of pressure vessels that are designed to operate at high pressures. Our pressure vessels with piping are stringently tested for any kind of cracks or damages so that it does not result in leakage or rupture failures in the application area.

Our pressure vessels reduce the chances of hazards like poisonings, suffocation, fires, and explosion hazards and any damage to life and property. This is because of their safe design, installation, operation, and maintenance which are done in accordance with the appropriate codes and standards that are essential to worker safety and health.

Available with us is an accurately designed range of high pressure reservoirs that meets the requirements of API 682 for Plans 52 and 53A. Having a Capacity of 3 & 5 gallon these reservoirs are offered in two versions i.e. welded ellipsoidal head and flanged removable bottom head for ease of internal cleaning.

Fabricated using 316L stainless steel, these API 682 reservoir systems are supplied as complete assemblies, which are ready to install in refinery, petrochemical and chemical industries. We provide pressure indicator, pressure switch and level switches with these reservoirs as instruments.

Our high technology chemical dosing systems are designed by our expert team of technicians from single point injection units to multi-compartmented to meet the variegated requirements of our clients. These reliable and durable chemical dosing systems are widely applicable in petrochemical and chemical processing industries. We have supplemented these systems with polyelectrolyte powder wetting system and solution eductor system that helps reducing the corrosion problems.

We offer a precision-made range of decanter centrifuge vessels that can perform feeding, separating, washing and discharging in sequence and are suitable for separating the materials with their solid density larger than their liquid density. These horizontal solid-bowl scroll discharge sedimenting centrifuge vessels can be continuously operated at their full-speed without deteriorating production capacity. Provided with suspension with solid phase particle size of 0.005- 15mm, consistency of 1-40% and maximum temperature of 100°C, these vessels find application in the chemical industry, light industry, pharmacy and food industry as well as environment protection.

These vessels require the following basic conditions for application:

• The materials to be separated should be solid-liquid intermixture such as suspension, not emulsion.
  
• There must be a certain differential which big in 0.06g/cm3 density between all the phases composing suspension or intermixture.
  
• The suspension concentration should be 1-40%.
  
• The partial size of solid phase should be 0.005-15mm
  
• The work temperature in the process of separating should be 100°C.
  
• Appropriate viscosity
  
• Used for dewatering of solid phase, clarification and separation of liquid phase, liquid-liquid-solid three-phase separation and size-grading
  

These decanter centrifuge vessels possess the below mentioned technical specifications:

• High rotational speed
  
• High separating factor
  
• Big length-diameter ratio
  
• Big capacity
  
• Fine separation effect
  
• Low vibration
  
• Low noises
  
• High bearing capacity
  
• Precise dynamic balance through dual rotors
  
• Reliable
  

The specific models are provided with the following technicalities:

The centrifuges which have drum diameter below 600mm are capacitated with a separating rotational speed of above 3000r/min, separating factor of above 2500 and length-diameter ratio of up to 5.2. The highest rotational speed of LW245x980-N can reach 5400r/min with the separating factor of above 4000.

The decanter centrifuge series with diameters of 245,380,450,520,650,720 and 1120 (mm) are all designed according to the latest fluid theory and with reference to the advanced structures abroad.

We provide our clients with a appropriately designed assortment of mixed bed polishing units that are installed when a water quality of less than 1 micro OHM conductivity is required. Constructed using strong acid Cation (SAC) resin and strong base Anion (SBA) resins in the ratio of 2:3, these mixed bed polishing unit are in conformation with the industrial standards. The volumes of the resins are dependent upon the incoming water analysis and the required quantity of treated water and vary from industry to industry.

Precisely constructed, our collection of cement silo are widely acclaimed by our clientele due to their compliance with the standards of ASME, Sec. VIII Div. 1, BS 5500, IS 2825 or any other standard.

Available in rubber lined, lead lined or FRP lined condition, these silo systems possess the following attributes:

• Capacity –Thickness: 20 mm
  
• Length: 20 Metres. Or more
  
• Weight: up to 20 Tons
  
• Diameter: 3.5 Metres
  

We manufacture and supply a quality approved array of dryers that comprises of a rotating cylindrical tube that minimizes the moisture content of the material in very less time by bringing it into direct contact with a heated gas. Our dimensionally accurate rotatory driers and other driers are constructed using superior material so that best quality is provided to our clients.

Our precision-engineered collection of chamical reactors is designed by our technical experts in exact specifications of the application they cater to. Constructed appropriately for reactions at low and high-pressure containment, controls or associated equipments, these reactors are in compliance with the industrial standards. These reactors find application in diverse industries such as pharmaceuticals, chemical engineering, process engineering industries, off shore activities, material testing units and manufacturing set ups.