The automatic single head ampoule filling & sealing machines available with us are manufactured on the principle of slant travel of ampoules while filling and sealing. The technical specifications of our automatic single head ampoule filling and sealing machines are given below:

Technical Specification
Model No.	HFS-30	HFS-55	HFS-100
Model No.	ONE	TWO	FOUR
Optimum Output/ Minute	20 TO 30	40 TO 55	80 TO 100
Ampoule Size / Range	01 TO 20 ml.	01 TO 10 ml.	01 TO05 ml.
Powder Required	0.5 H.P.	0.75 H.P.	0.1 H.P.
Dimensions	915 mm(L)	915 mm(L)	1200 mm(L)
	610 mm(W)	760 mm(W)	1070 mm(W)
	965 mm(H)	965 mm(H)	965 mm(H)

We have for our clients our automatic two head ampoule filling and sealing machines. We also offer these machines with a large opening at the bottom that is used for ease of absolute cleaning. The automatic two head ampoule filling & sealing machines come in the following specifications:

Technical Specification
Model No.	HFS-30	HFS-55	HFS-100
Model No.	ONE	TWO	FOUR
Optimum Output/ Minute	20 TO 30	40 TO 55	80 TO 100
Ampoule Size/ Range	01 TO 20 ml.	01 TO 10 ml.	01 TO05 ml.
Powder Required	0.5 H.P.	0.75 H.P.	0.1 H.P.
Dimensions	915 mm(L)	915 mm(L)	1200 mm(L)
	610 mm(W)	760 mm(W)	1070 mm(W)
	965 mm(H)	965 mm(H)	965 mm(H)

We manufacture and offer our automatic four head ampoule machines that are capable of functioning on the principle of slant travel of ampoules.

These machines come with pendant type electrical control panel that is lifted form machine for ease of operation and safety. The technical details of these machines are:

Model No.	HFS-30	HFS-55	HFS-100
Model No.	ONE	TWO	FOUR
Optimum Output/ Minute	20 TO 30	40 TO 55	80 TO 100
Ampoule Size/ Range	01 TO 20 ml.	01 TO 10 ml.	01 TO05 ml.
Powder Required	0.5 H.P.	0.75 H.P.	0.1 H.P.
Dimensions	915 mm(L)	915 mm(L)	1200 mm(L)
	610 mm(W)	760 mm(W)	1070 mm(W)
	965 mm(H)	965 mm(H)	965 mm(H)

Avail from us, our range of automatic six head ampoule filling and sealing machines that is well designed and sturdy. Constructed on the principle of slant travel of ampoules while filling and sealing, these machines are appropriate for ampoule of various neck dimensions, thickness and ovality.

These machines are used for stainless steel square pipe frame and are totally encompassed with stainless steel coverings that come in smooth finish. The automatic six head ampoule filling and sealing machines come in the following given specifications:

Technical Data
Model No.	HFS-150
NO of Syringes	Six
Output	120 to 150 Ampoule/Minute
Ampoule Size/Range	01 to 10 ml
Power	1 HP
Overall Dimensions	1600[L] 1400 {W} 1400 (H) In mm
Net Weight	650 kgs.

Dosing syringes driven by separate brush-less motor. Ampoule sampling Eight Head Ampoule Filling And Sealing Machine (Linear Filling And Sealing Machine), unit without stopping the machine. Possibility to memorize various parameters of different ampoule sizes Extremely robust, High quality engineered. Higher output of 16000 Ampoules / hour. High dosing accuracy.

Machine equipped with pre-warming station. Proven mechanical "No Ampoule, No Filling" System. Flow-meter makes regulating of flames easier. Fast changeover times, little maintenance, easy cleanable. Critical components made on CNC machine.

We manufacture multi jet Ampoule and vial washing machines that are simple and compact in design. These machines come in the model HAVW-340 that come with latest GMP demand. Made from stainless steel, these machines have the flexibility to wash 1 ml to 20 ml ampoule & 2 ml to 100 ml vial with the help of suitable change parts. The different features of our multi jet ampoule and vial washing machines are:

• Positive & pressurised jets through washing needle for pressure cleaning at minimum usages of Washing Media.
• Sound design concept of pressure tanks for reverses & continuous supply of washes medias.
• Both internal & external washing ensuring absolutely & continuous ampoule & Vial after sequential washing.
• Acrylic top cover for clear view of washing events taking place in the machine.
• On-line poly carbonates housing with P.P. replaceable filter cartridge of 10 microns for water & 5 microns for air for best possible washing. All contact parts of washing media & compressed are of S.S 316 or HDPE of Poly carbonate or P.P.
• In the event of acrylic cover lifted during cycle operation, the machine will automatically stop and re-start from the point when cover is pushed down.

Our manufacture Linear Vial Washing Machine (Automatic Linear Vial Washing Machine), are simple and compact in design with the following description:

SALIENT FEATURES :

• Containers Feed from the decartoning station (Optional) are received on a Un-scrambler through visual inspection unit (optional). An infeed worm inverts container to neck down position and feed them through a specially designed indexing device. The device carries the container forward and stops.
• Nozzles carrier enter into the container and activities the jet of water/air. The air/water flow is deactivated after the washing cycle is over.
• Device indexes the vials for next wash.
• A separate pumping station (optional) give the right quantum of water at the desired pressure.
• Washed containers are again inverted to neck upward position to collect in Trays/directly feed to Tunnel.

Model : HAVL-100

We manufacture Automatic Horizontal Ampoule and Vial Labeling Machine model HAVL-100, which are extensively used in pharmaceutical companies.

Salient Features

- No ampoule no Lable.
- Over printing device (optional).
- Vertical collection system for ampoules / 2 ml (optional).

Specification
Electrical Rating	0.5 HP , 750 RPM
Power Characteristic	415 Volts,3 Phase,4 Wire System,50 Cycle/Sec
Finish / Painted	S.S. Finish / Painted in Nickle - gray Colour
Overall Dimensions	1955mm (L) x 810mm (W)x 1420mm (H)
Net Weight	700 kgs. Approx
Output / Hour	3000 to 6000 Objects

Input Specification
Ampoule / Vial (Object) Diameter	10 mm to 50 mm
Lable Length	20 mm to 100 mm
Lable Hight	16 mm to 90 mm

Detailed Product Description
Automatic Injectable Dry Powder Filling Machine
Production Capacity 100 to 250 Vials Per Minute
No Vial No Filling Systems
Suitable for 0.5 mg to 6gms (with help of change parts).
 - Digital Counter
- A. C Variable Drive
- GMP Model
- Matt Finished

We supply and manufacture Vial Filling Stoppering Machine which are widely used in varied kind of  filling stoppering applications with the following features:

FEATURES:

- Inbuilt Scrambler & Unscrambler 24” Dia
- Suitable For 02ml to 100 ml Vial
- No Vial No Filling System
- No Stopper Machine Stop
- Vibration free Construction for Trouble free performance
- S.S Matt Finished
- Digital Counter For Counting Of Vials
- AC Frequency Drive
- Acrylic Cabinet with Imported Aluminum Structure For Machine, Scrambler & Unscrambler
- Pre & Post Nitrogen Gas Flushing Unit
- Direction of machine is left to right

We offer cap sealing machines which are widely used in varied kind of cap sealing applications with the following specification:

FEATURES:

-Left to Right Direction of Machine
-Single Motor synchronizes Conveyor, star wheel & Platform Turret
-Adjustable Height of Conveyor
-No Cap Machine is Stop
-Digital Counter For Counting of Vials
-AC Frequency Drive
-Quick and very easy change over

STERILIZING & DEHYDROGENATING TUNNELS Leading edge technology in compliance in CGMP design criteria perfect understanding of the needs of our customer, blossoms in to a product of high quality and performance from engineering and manufacturing to commissioning at customer plants.

Effective Sterilization and Dehydrogenation Process Dehydrogenation tunnels designed to sterilize dehydrogenate glass containers with a continuous process maintaining an ISO 5 environment along the hole length and width of the conveyor belt complying with ISO 14644-1 requirements.

Design to allow higher outputs in a more compact body and with better control of the process parameters. Air Handling Equipment: Special low noise high static blowers take in air through 5 micron filters and delivers laminar air through HEPA filter of 99.97% efficiency at 0.3 micron.

Heating elements made from ISI 304 stainless steel are thyristor controlled and are located on the hot zone chamber door for easy maintenance. Air is heat before being blown down on the HEPA filter to achieve even distribution and temperature uniformity.

Process Chambers: Drying Zone: Glass container entering the drying zone from the up-line washer are treated with clean vertical laminar air, vaporizes moisture, pre heats the containers and protects hot air back flow from the hot zone.