Harsiddh Industries

We offer high performance air jet cleaning machines that is widely
used to clean plastic and glass bottles and jars. This is done by the action of
vacuum and air jets. Our range is appropriate for cleaning of non-sterile
containers such as dry syrups, bulk packing for capsules and tablets and
others. Further, our cleaning manifold system consists of inner nozzles, an
outer socket that connects to an exhaust. We also offer our clients as per
their requirements with vacuum pump for suction, air filters, compressor and
others. Some of our technical specifications are:

• Model
  HAVC-30


• Output
  40/60 Container/Minute


• Depending
  on Size


• Power
  0.75HP, 415 Volts Ac


• 3,
  Phase, Neutral, 50 Cycles/Sec


• Dimensions
  2000 mm (L)X 1100 mm (W)X1500mm(H)


• Case
  Dimensions 2300 mm (L) X 1300 mm (W) X 1700 mm (H)


• Net
  Weight 200 KGS


• Gross
  Weight 360 KGS

Our gamut of automatic linear vial washers is available in
2 different models such as Model HVW-150/80 and Model HVW-120. These models are
described below in details:

Model HVW-150/80 Washing
System
 
Our range of washing machine with the model HVW-150/80 provides
three air washes and four water washes and one silicon. It also provides
absolute flexibility with user for washing cycle.

Some of the applications are as follows:

• Suitable
  for washing of Vials (2ml to 30 ml) (dia. 14mm to 38mm) GMP


• All
  Contact parts made out from SS 316


• Entire
  frame covers & non contact parts made out from SS 304


• Nozzles
  enter in to the container during washing cycle to meet cGMP requirement Low
  water consumption


• Quick
  change over with minimum use of tools
  

Following is the operation of our range:

• Containers
  feed from the decartoning station (optional) are received on a unscramble
  through Visual Inspection Unit (optional).


• An
  infeed worm inverts container to neck down position and feeds them through
  a specially designed indexing device.


• The
  device carries the container forward and stops.


• Nozzles
  carrier enters into the container and activates the jet of water / air.


• The
  air / water flow is deactivated after the washing cycle is over.


• Device
  indexes the vials for next wash.


• A
  separate pumping station (optional) gives the right quantum of water at
  the desired pressure.


• In
  the absence of separate pumping station we can provide the recirculation
  & siliconisation system on Request.


• Washed
  containers are inverted to neck upward position to collect in trays /
  directly feed to tunnel.

Model HVW-120 Washing
System
Our model HVW-120 washing machine offers four water washes
and three air washes. It is completely flexible for washing cycle. Some of the
essential applications are:

• Suitable
  for washing of Vials (2ml to 30ml) (dia. 14mm to 38mm) GMP


• All
  Contact parts made out from SS 316


• Entire
  frame covers & non contact parts made out from SS 304


• Quick
  change over with minimum use of tools

Operation:

• The
  containers received on an unscrambler through Feeding Tray (manual)
  inverted to neck down position by an infeed worm which travels through
  guide-rail with the nylon rollers continuously.


• The
  fixed nozzles under the guide rail washes container with continuous flow.


• The
  pumping station provides the water at the desired pressure


• The
  washed containers are again inverted to neck upward position to collect in
  Tray or directly feed to tunnel.

 

Our array of automatic rotary vial washing machine is
fabricated with supreme quality raw material. These are offered with three air
washes and three water washes and is entirely flexible with user for washing
cycle. We also offer rotary vial washing machine in model HVW-120. Following are the applications of our range:

• Suitable
  for washing of Vials (2ml to 100ml) (dia. 14mm to 52mm) GMP


• All
  Contact parts made out from SS 316


• Entire
  frame covers & non contact parts made out from SS 304


• Needles
  enter in to the container during washing cycle to meet cGMP requirement


• Low
  water consumption


• Quick
  change over of parts for other size of containers


• The
  Grippers provided ensure efficient holding of different sizes of vials.

Some of the important technical details are:

• Optimum
  output 35 to 250 vials / minute Power 1.5 HP 415 volt AC 3


• Phase
  with neutral 50 cycle /minute


• Floor
  space 2000 (L) 2000 (W) in mm


• Height
  900 to 950mm adjustable

 
 
 

We manufacture and supply high performance Gravity Roller Conveyors that deliver a cost effective and virtually maintenance-free
handling of goods for various application purposes and requirements.
Available at competitive prices, our gravity roller conveyor systems
have found applications in warehousing, production lines, accumulation
at start or end of powered conveyors & manual assembly lines.

We manufacture and supply Hood Type Inspection Table by using best raw
materials that are procured from the renowned vendors. Our highly
precision hood type inspection tables are in great demand amongst the
quality conscious clients from all over the market.

We provide a wide range of automatic tablets and capsule elevator available in the model no. TE-2000. These are manufactured with superior quality stainless steel that accord to GMP Standards. They are widely used to move capsules or tablets from a floor mounted hopper to a packing machine and can dismantle without using any tools. We also offer various optional accessories such as low level hopper beacon, interchangeable duplicate contact parts and castors as per our client’s requirements. Some of the salient features are:

• 50/100 Litres product hopper
• Vibratory feed system with chip sieve and dust extraction poir
• Single elevator bucket with auto level detection
• Pneumatic bucket lift
• Gentle tipping action eliminates damage to delicate products
• Maximum tipping height of 2150mm
• Fully encompassed product covers
• Unit responds to external signal Ms
• Can be loaded directly from bottom discharges IPC

Following are some important technical details:

• Electric 110/240V 0.4 Kw
• Length 1570 mm
• Width 1037 mm
• Height 2370 or 2720 mm