manufacturing

Overview

LPC2148 Header Board is a low cost breakout Board with on chip USB Peripheral interface which can be used to quickly evaluate USB end device functionality. LPC2148 is a 16/32 bit ARM7TDMI-S™ with 512K Bytes Program Flash, 42K Bytes RAM, USB 2.0, RTC, 10 bit ADC 2.44 uS, 2x UARTs, 2x I2C, SPI, 2x 32bit TIMERS, 6x PWM, 8x CCR, 1x DAC, WDT, 5V tolerant I/O, up to 60MHz operation.

The I/O Pinout for all the interfaces are given out via berg connectors, thereby making it easy to interface with the compatible external devices.

LPC2148 has a 20 pin Wiggler-compatible JTAG interface which can be used for debugging/programming.

 

LPC2148 Header Board Specifications

 

1.   MCU: LPC2148 from NXP. 

2. Processor: ARM7 TDMI.
3. Standard JTAG connector (2x10 pin) for programming/debugging with ARM-JTAG.
4. The board has access to allmost all pins for external connection. This makes it easy for any external device interface. The pins are named according to the interfaces where ever possible. All pins are available via Berg Strip.
5. On Board USB Device with USB Link LED. This is a perfect solution for developing USB Peripherals.
6. On Board 3.3V and 5V Power Supply with Power Supply LED and filtering capacitor.
7. On Board Reset and ISP Circuit.
8. On Board LED connected to a IO pin via jumper.
9. 12 MHz crystal oscillator.
10. 32.768 kHz crystal for Real Time Clock.

11. PCB: FR-4, 1.6 mm, Green or Blue soldermask, white silkscreen component print.

 

LPC2148 MCU Specifications

 

1. NXP LPC 2148 with 12 MHz Crystal Oscillator (With Boot loader Software).
2. High Performance 32-bit ARM7TDMI-S™ CPU.
3.   512 KB Programmable Flash Memory provides minimum of 10,000 erase/write cycles and
4. 10 years of data-retention.
5. 32 KB Data Memory (SRAM).
6. In-System Programming/In-Application Programming (ISP/IAP) via on-chip boot loader software.
7. Single Flash sector or full chip erase in 400 ms and programming of 256 bytes in 1 ms.
8. Embedded ICE RT and Embedded Trace interfaces offer real-time debugging with the on- chip RealMonitor software and high-speed tracing of instruction execution.
9. USB 2.0 Full-speed compliant device controller with 2 KB of endpoint RAM.
10. Provides 8KB of on-chip RAM accessible to USB by DMA.
11. Two 10-bit ADCs provide a total of 14 analog inputs, with conversion times as low as 2.44 us per channel.
12. Single 10-bit DAC provides variable analog output.
13. Two 32-bit Timers/External event counters.
14. Four Capture and four Compare channels.
15. PWM unit with six output pins.
16. Low power Real-time clock with independent power and dedicated 32 kHz clock input.
17.   Multiple serial interfaces including two UARTs, two Fast I2C (400 kbit/s), SPI™ and SSPwith buffering and variable data length capabilities.
18. Vectored interrupt controller with configurable priorities and vector addresses.
19. Up to 45 of 5 V tolerant general purpose I/O pins.
20. Up to nine edge or level sensitive external interrupt pins.
21.   60 MHz maximum CPU clock available from programmable on-chip Phase-LockedLoop (PLL) with settling time of 100us.
22. On-chip integrated oscillator operates with external crystal in range of 1 MHz to 25 MHz.
23. Power saving modes include Idle and Power-down.
24. Individual enable/disable of peripheral functions.
25. Processor wake-up from Power-down mode via external interrupt.
26. Single power supply chip with Power-On Reset (POR) and Brown-Out Detection (BOD)
27. CPU Operating Voltage range of 3.0 V to 3.6 V

 

Product Code: HEMiniArn2148
Reward Points: 0
Availability: In StockPrice: INR 2,160.00 

Product Code: HCA72
Reward Points: 0
Availability: In StockPrice: INR 2,800.00 

LPC2148 MCU Specifications

 

1. NXP LPC 2148 with 12 MHz Crystal Oscillator (With Boot loader Software).
2. High Performance 32-bit ARM7TDMI-S™ CPU.
3.   512 KB Programmable Flash Memory provides minimum of 10,000 erase/write cycles and
4. 10 years of data-retention.
5. 32 KB Data Memory (SRAM).
6. In-System Programming/In-Application Programming (ISP/IAP) via on-chip boot loader software.
7. Single Flash sector or full chip erase in 400 ms and programming of 256 bytes in 1 ms.
8. Embedded ICE RT and Embedded Trace interfaces offer real-time debugging with the on- chip RealMonitor software and high-speed tracing of instruction execution.
9. USB 2.0 Full-speed compliant device controller with 2 KB of endpoint RAM.
10. Provides 8KB of on-chip RAM accessible to USB by DMA.
11. Two 10-bit ADCs provide a total of 14 analog inputs, with conversion times as low as 2.44 us per channel.
12. Single 10-bit DAC provides variable analog output.
13. Two 32-bit Timers/External event counters.
14. Four Capture and four Compare channels.
15. PWM unit with six output pins.
16. Low power Real-time clock with independent power and dedicated 32 kHz clock input.
17.   Multiple serial interfaces including two UARTs, two Fast I2C (400 kbit/s), SPI™ and SSPwith buffering and variable data length capabilities.
18. Vectored interrupt controller with configurable priorities and vector addresses.
19. Up to 45 of 5 V tolerant general purpose I/O pins.
20. Up to nine edge or level sensitive external interrupt pins.
21.   60 MHz maximum CPU clock available from programmable on-chip Phase-LockedLoop (PLL) with settling time of 100us.
22. On-chip integrated oscillator operates with external crystal in range of 1 MHz to 25 MHz.
23. Power saving modes include Idle and Power-down.
24. Individual enable/disable of peripheral functions.
25. Processor wake-up from Power-down mode via external interrupt.
26. Single power supply chip with Power-On Reset (POR) and Brown-Out Detection (BOD)
27. CPU Operating Voltage range of 3.0 V to 3.6 V

 

Product Code: HEAD1
Reward Points: 0
Availability: In StockPrice: INR 3,500.00
· Useful as base board to develop project
· Large amount of prototyping area (SMD & Through
Hole) available
· Micro Modules can be easily mounted
· Programming through Auto and Manual Mode (For
SM2148)
· Two UARTs available as 3 wire RS232 ports (For
SM2148)
· Connector for 16x2 Alphanumeric LCD (For SM2148)
· All port pins available on FRC connector for direct
connection with other circuit
· 9V, 500mA Adapter, serial cable provided.  

Product Code: HEMiniArm2378
Reward Points: 0
Availability: In StockPrice: INR 9,000.00 

Product Code: HESM7027
Reward Points: 0
Availability: In StockPrice: INR 3,480.00
 Supported microcontrollers: ADuC7026 and AduC7027
(ARM7TDMI architecture)
· On-chip 62KB ISP flash, 8KB SRAM
· Supply voltage required: 5VDC
· Power consumption during normal operation: 35 mA @
5VDC (speed = 5.22 MHz); 65 mA @ 5VDC (speed =
41.78 MHz)
· Speed: 5.22MHz default; 41.78MHz using PLL
· All port pins (up to 40 GPIOs) and JTAG pins available on
connector. All digital I/O pins are 5V tolerant.
· RS232 (3 wire) on separate connector, useful for ISP or any other purpose.Separate push-button
included for selecting ISP Program mode.
· Other interfaces: 2 I2C, 1 SPI up to 3.48 MHz
· Module includes I2C compatible 64KB EEPROM (AT24C512) for non-volatile data storage.
· Also includes I2C compatible RTC (DS1338). Battery for RTC maybe connected externally.
Module connector has pins for connecting external battery (3VDC only).
· Analog Inputs: up to 16 ADC channels, single ended or differential, 12 bit resolution, 1 Megasamples
per second. Default internal VREF is 2.5V; external VREF from 0.625 to 3.3V can be
applied.
· On-chip temperature sensor (±3°C)
· On-chip voltage comparator.
· Analog outputs: up to 4 DAC channels, 12 bit resolution.
· Miscellaneous features: 4 timers, wake up and watchdog timer, power supply monitor, 3 phase
16 bit PWM generator, Programmable Logic Array (PLA)
· Compact footprint, 35 mm X 45 mm. Pins available in such a way so that the module can be
mounted in the FRC socket like an IC. Thus giving your hardware a modular design.
· EAGLE libraries available, so module can be used as a component in your EAGLE schematic
and PCB.
· Operating Temperature Range: −20°C to +70°C.  

Product Code: HCA70
Reward Points: 0
Availability: In StockPrice: INR 850.00 

Overview

LPC2103 Header Board uses LP2103 MCU which has a ARM7 Core. LPC 2103 has 32Kb Flash, 8Kb RAM, an RTC, 2 UARTs, I2C, SPI, 2 x 32bit timers, 7 CCRs, 6 PWM, WDT, 5V tolerant I/O. The low cost and basic protocol interface availibility makes LPC2103 Header Board ideally suited for people trying their hand for the first time on ARM7 MCUs. Although experienced programmers can use the same for their applications too.

The I/O Pinout for all the interfaces are given out via berg connectors, thereby making it easy to interface with the compatible external devices.

LPC2103 has a 20 pin Wiggler-compatible JTAG interface which can be used for debugging/programming.

 

LPC2103 Header Board Specifications

1. MCU: LPC2103 from NXP

2. Processor: ARM7

3. ARM JTAG 2x10 pin connector

4. On Board reset and ISB Circuit.

5. OnBoard 5V, 3.3V and 1.8V regulators. 5V and 3.3V are given out via Berg Connectors. Also had a onboard Power Supply LED and filtering capacitors.

6. I/O Pins are given out in accordance to interfaces where ever possible.

7. Test LED conected via jumper.

8. On Board 12 MHz Crystal Oscillator for MCU.

9. ON Board 32.768 KHz Crystal Oscillator for Real Time Clock.

10. PCB: FR-4, 1.6 mm, Green or Blue soldermask, white silkscreen component print.

 

LPC2103 MCU Features

1. 16-bit/32-bit ARM7TDMI-S microcontroller in a tiny LQFP48 package.

2. 2 kB/4 kB/8 kB of on-chip static RAM and 8 kB/16 kB/32 kB of on-chip ßash program memory. 128-bit wide interface/accelerator enables high-speed 70 MHz operation.

3. ISP/IAP via on-chip bootloader software. Single ßash sector or full chip erase in 100 ms and programming of 256 bytes in 1 ms.

4. The 10-bit A/D converter provides eight analog inputs, with conversion times as low as 2.44 ms per channel and dedicated result registers to minimize interrupt overhead.

5. Two 32-bit timers/external event counters with combined seven capture and seven compare channels.

6. Two 16-bit timers/external event counters with combined three capture and seven

   compare channels.

7. Low power Real-Time Clock (RTC) with independent power and dedicated 32 kHz clock input.

8. Multiple serial interfaces including two UARTs (16C550), two Fast I2C-buses (400 kbit/s), SPI and SSP with buffering and variable data length capabilities.

9. Vectored interrupt controller with conÞgurable priorities and vector addresses.

10. Up to thirty-two 5 V tolerant fast general purpose I/O pins.

11. Up to 13 edge or level sensitive external interrupt pins available.

12. 70 MHz maximum CPU clock available from programmable on-chip PLL with a possible input frequency of 10 MHz to 25 MHz and a settling time of 100 ms.

13. Power saving modes include Idle mode, Power-down mode with RTC active, and Power-down mode.

14. Processor wake-up from Power-down mode via external interrupt or RTC.

 

Product Code: HCAC0
Reward Points: 0
Availability: In StockPrice: INR 1,250.00 

Overview


LPC1768 Header Board is a prototyping board that uses Cortex M3 processor from ARM Family. The package has a option for wide range of communication interfaces. The I/O pins are given out via external Berg connectors. The device can be programmed via a external 20 pin JTAG. It also supports ISP Programming support via UART0. All that you need is a MAX232 Baord and flash programmer (FlashMagic). 

 

The interfaces that the controller supports varies from USB (Device, Host, OTG), I2C, SPI, SSP, UART, ADC, DAC, PWM, CAN, Ethernet etc. All that is needed to be done is to hook up a few wires to the external peripherals and start working on it. Different Breakout Boards can be purchased for different interfaces. 

Product Code: HCAC5
Reward Points: 0
Availability: In StockPrice: INR 4,900.00 
Product Highlights

 

Overview

LPC1768 HPLUS TT is a combo pack available with LPC1768 HPlus and 3.2nch TFT with touchscreen interface. This board has connectivity features for Micro SDCard, Ethernet, USB Host and USB Device, etc. The TFT display and the touchscreen is SPI Compatible. A 14 pin box connector is provided for the TFT and touchscreen interface.

 

LPC1768 HPLUS TT Features

 

1. USB Device and Host Connectivity Options.
2. Ethernet with DP83848 PHY MAC.
3. SDCard (Micro) Interface.
4. Analog input via ADC0.5
5. I/O pinout for different interfaces.
6. OnBoard Reset and ISP Switches.
7. On Board Power Supply Circuit for +5V and +3.3V (USB or external Power Source input options)
8. On Board 12 MHz Clock
9. 32.768 KHz Clock for RTC.
10. Option for a CMOS Battery.
11. Onboard 20 pin JTAG connector for debugging/programming applications.
12. On board TFT Connector for 3.2inch TFT with touch.
13. LED for Power Supply, USB, Ethernet and Test LED.

 

3.2 Inch TFT Features

1. Display Mode: Normally White Transimissive Type
2. Driver IC: SPFD5408
3. Interface : SPI.
4. Viewing Direction : 9.0" clock.
5. Number of Pixels: 240 x 320
6. With Touch Panel whose interface is also via SPI through ADS7846.

 

Features of LPC1768

Best in class Cortex M3 Hardware.

 

1. 100 MHz ARM Core with 64 KB of SRAM and 512 KB Flash.
2. 8-channel general purpose DMA controller, 4 UARTs, 2 CAN channels, 2 SSP controllers, SPI interface, 3 I2C interfaces, 2-input plus 2-output I2S interface, 8-channel 12-bit ADC, 10-bit DAC, motor control PWM, Quadrature Encoder interface, 4 general purpose timers, 6-output general purpose PWM, ultra-low power RTC with separate battery supply, and up to 70 general purpose I/O pins.

 

 

 

Product Code: HCAC2
Reward Points: 0
Availability: In StockPrice: INR 3,000.00 
 

Product Code: HCAC3
Reward Points: 0
Availability: In StockPrice: INR 5,800.00 

Product Code: HRD3
Reward Points: 0
Availability: In Stock Price: INR 950.00 
Quick OverviewThis new version uses an SMD 5x2 header. This is a simple to use USB AVR programmer. It is low cost, easy to use, works great with AVRDude, and is tested extensively on a Windows desktop. Based on Dick Steefland's USB tiny and Limor Fried's USB tiny ISP. 

We use this programmer extensively on a Windows box and love it. This programmer works really well for nearly all AVR micros supported by AVRDUDE. This board is buffered and power protected so that you can do some really evil things to the programmer without killing it. It is fast! Comparable speed to the AVR ISP2 USB programmer from Digikey. One of the greatest features of this board is the ability to power the target (up to 500mA) from the programmer.

To use this programmer, attach to a Windows machine and install the drivers listed above. Open a command prompt. Assuming WinAVR (and therefore AVRDUDE) have been installed, type: avrdude -c usbtiny -B 1 -patmega328 -U flash:w:main.hex Be sure to include the "-B 1" flag as this will significantly increase the programming speed! You may need to change -p flag to your appropriate microcontroller.

You can setup a tool and hotkey in Programmers Notepad to do this automatically.

Features: 
* Standard AVR ISP programmer 
* ATtiny2313 with USB tiny firmware preloaded 
* Buffered output 
* Programmer can power target 
* Supports ATmega168/328 and many others 
* Two status LEDs 
* 10-pin programming cable included

  

Product Code: HRD9
Reward Points: 0
Availability: In Stock

This new version uses an SMD 5x2 header. This is a simple to use Serial AVR programmer. It is low cost, easy to use, works great with AVR Dude, and is tested extensively on a Windows desktop. 

Program any AVR series micro controller using this ISP. Compact size, SMD based programmer. Helps reduce actual board size by keeping programmer off board. This programmer will also work with Pony prog. Features: * Standard AVR ISP programmer * 10-pin programming cable included * Compact size

 

Product Code: HE704
Reward Points: 0
Availability: In Stock Price: INR 900.00 
SPPV.1 is low cost serial port programmer for PIC microcontroller. The programmer does not need external power supply and it takes all necessary power and signal from RS232 Serial Port. SPPV.1 is supplied ready to run with its serial cable, manual and software on CDROM.

Note-Programmer is recommend to use on com port1.  

Product Code: HCAC1
Reward Points: 0
Availability: In StockPrice: INR 2,500.00 
Product Highlights

Overview

 

LPC1768 HPLUS is an extension board for LPC1768 Cortex M3 core. This board has connectivity features for Micro SDCard, Ethernet, USB Host and USB Device etc. LPC1768 HPLUS also has the connectivity for 3.2 inch TFT. The 3.2 inch TFT with touchscreen and 3.2 inch TFT without touchscreen can be interfaced to the module. These TFT displays use SPI communication. A 14 pin box connector is provided for the interface.

You can buy the TFT displays from the following links below

1.      3.2 inch TFT without Touchscreen

2.      3.2 inch TFT with Touchscreen

A special discount is offered on combo packs. Use Following Links to have a look at Combo Packs.

1.      HPLUS + 3.2inch TFT

 

2.      HPLUS + 3.2inch TFT with Touchscreen

 

Features of LPC1768

 

Best in class Cortex M3 Hardware.

 

1. 100 MHz ARM Core with 64 KB of SRAM and 512 KB Flash.
2. 8-channel general purpose DMA controller, 4 UARTs, 2 CAN channels, 2 SSP controllers, SPI interface, 3 I2C interfaces, 2-input plus 2-output I2S interface, 8-channel 12-bit ADC, 10-bit DAC, motor control PWM, Quadrature Encoder interface, 4 general purpose timers, 6-output general purpose PWM, ultra-low power RTC with separate battery supply, and up to 70 general purpose I/O pins.

LPC1768 HPLUS Features

1. USB Device and Host Connectivity Options.
2. Ethernet with DP83848 PHY MAC.
3. SDCard (Micro) Interface.
4. Analog input via ADC0.5
5. I/O pinout for different interfaces.
6. OnBoard Reset and ISP Switches.
7. On Board Power Supply Circuit for +5V and +3.3V (USB or external Power Source input options)
8. On Board 12 MHz Clock
9. 32.768 KHz Clock for RTC.
10. Option for a CMOS Battery.
11. Onboard 20 pin JTAG connector for debugging/programming applications.
12. On board TFT Connector for 3.2inch TFT (with touch and without touch).
13. LED for Power Supply, USB, Ethernet and Test LED.