We offer our range of muffle furnaces having light weight construction. Made from mild steel along with powder coating finish, the heating elements are manufactured from superior quality resistance wire coil wounded on the muffle. This rearrangement is embedded in refractory cement provided with low mass thermal insulation. This ensure optimum chamber's thermal uniformity as well as reduce the furnace's weight by 75% as compared to the various brick insulated furnace.

• Temperature range - up to 1100 °C
• Temperature is controlled by digital display indicator
• Power Supply - 220/240 V, 50 Hz AC

• The available sizes in inches is given as:

9” x 4” x 4”,	2	10” x 5” x 5”,	3	12” x 6” x 6”,	4	12” x 8” x 8”,
18” x 9” x 9”,	6	12” x 12’ x 12”,	7	18” x 12” x 12”,	8	24” x 12” x 12”

The range is provided with following optional accessories:

• Safety blind temp controller
• Microprocessor based PID controller
• Digital timer
• Door limit switch

We offer our range of chamber furnaces, which encompasses the following specifications:

• Robust & sturdy construction with mild steel
• Finished with heat resistant enamel paint or aluminium
• Low thermal mass insulation opposite to brick insulation
• Provide rapid heating and cooling
• Lighter in weight and compact construction
• Facilitates quick heating

For the heating purpose, a powerful free radiating Kanthal-A1, a coiled wire heating system, is provided in refractory grooves on different sides of the chamber ensuring thermal uniformity.

• Temp Range - 1100 to 1200 °C
• Temperature is controlled with digital indicator having accuracy of +/- 5 °C
• Power Supply - 220/240 V (single phase) or 400/440 V (three phase), 50 Hz AC

the provided optional accessories are:
• Safety blind temp controller
• Microprocessor based PID controller
• Digital timer
• Door limit switch

We offer a range of Annealing Furnaces having heavy weight construction. Made from mild steel along with powder coating finish, the heating elements are manufactured from superior quality resistance wire coil wounded on the muffle. This rearrangement is embedded in refractory cement provided with low mass thermal insulation. This ensure optimum chamber's thermal uniformity as well as reduce the furnace's weight by 75% as compared to the various brick insulated furnace.

We offer our range heavy duty ovens suitable for various Industrial Laboratories used for
• preheating
• dry content analysis
• glassware drying
• dry sterilizing

With a possibility of customization, the construction of our range of heavy duty ovens is given below:

• Triple walled construction with superior grade mild steel sheet
• Coated with epoxy powder
• Inner construction with MS, SS & Aluminium
• Insulated work space using through high density mineral wool
• Chamber access via single hinged & double walled side door
• Roller type latch catch for locking
• Wire mesh trays providing better air circulation
• Air Circulation is provided with forced air circulation, natural convection (gravity) and forced air draft (no recirculation)
• Heating through 80/20 Nichrome wire having porcelain runner supports, SS Tubular Air heaters, Incoloy Tubular Heaters, etc
• Heater terminals are taken out increasing the life of heaters
• Provide extremely accurate temperature uniformity
• Temp Range - 40 °C to 500 °C.
• Temp Controlled by capillary thermostat of liquid expansion type
• Electronic digital display time
• temp controller having +/- 2 °C accuracy for lower temperatures and +/- 3 °C accuracy for higher temperatures
• Working chamber Size - 90 x 60 x 60 cms

We offer our range of electrode drying ovens, which are CFC free and Eco friendly. Our range of products are thoroughly tested for efficient and effective utilization. The various electrical and electronic components are tested for furnishing effective utilization even in prolonged thermal cycling and exposure to humidity. Our range of products are used in variety of applications in drugs, chemical, pharmaceutical and cosmetics. The customizable construction is provided as:

• Double walled stainless steel interior
• The interior is provided with epoxy powder coated
• Mild Steel exterior
• Glasswool & Puff Insulation negate temperature loss
• Chamber illumination for viewing sample
• Full length inner plexi-glass door
• Castor wheel arrangement for easy mobility
• Digital Temperature Controller
• Provided with dry bulb and wet bulb principle
• Hermetically sealed Tecumshah & Kirloskar compressor
• Air cooled condensing unit and accessories
• Durable SS tubular heaters

The available specifications is provided as:

	Environmental Chamber	Humidity Oven
Temp Range	10°C to 70 °C	Ambient +5 °C to 70 °C
Humidity Range	40 to 95 % RH	Ambient to 90-95 % RH
AccuracyTempRH	+/- 1°C or better +/- 3 % or better	+/- 1°C or better +/- 5 % or better
Sizes (Liters)		90 , 175, 285, 340, 450

We offer our range of laminar air flow cabinets widely used for high-tech manufacturing and assembly. Hence, our range of products found wide application in

• Semiconductor Assembly
• Biotechnology
• Pharmaceutical
• Aerospace
• Food
• Medical Devices
• Hospitals

Our innovative and efficient approach facilitates us to manufacture our range of laminar air flow with Class 100 airflow in compliance with US FED STD 209. It work on power supply of 220/240 V single phase and 50 Hz AC. Available in both vertical and horizontal models, the technical specifications is provided as:

Air Velocity	Between 0.4 to 0.5 m/s with +/- 20%
Prefilter	Washable with a stoppage upto 90 % at 5 microns
Light Intensity (Lux)	900 – 1300 Lux
Cleanliness	US Federal Standard 209 E Class 100
HEPA Efficiency	>99.997 % at 0.3 microns with DOP test
Sound Level	Less than 65 dB (A)

We offer our range of heating mantles for temperature up to 300º C with energy regulator. Our range of heating mantles is offered in following specifications:

• Mantle body is spun without joint
• Duly painted
• Provided with special grade mineral wool
• Fitted with 'energy regular' temperature maintenance
• Pilot lamp is completed with 3 core wire
• Plug work on 220 V AC

Our range of control panels comes with modern SCR Thyristorised control system providing efficient controlling accuracy, improved heater life and 35- 40 % of power saving. Our range of control panel is provided with effective wired control panels of ISI grade.

Our range of rotary furnaces are used in a variety of thermal processing applications including general lab & research work, component and stability testing, core hardening, drying glassware, and sterilizing.

• Double walled stainless steel interior
• The interior is provided with epoxy powder coated
• Inner construction with MS, SS & Aluminium
• Insulated work space using through high density mineral wool
• Heating through 80/20 Nichrome wire having porcelain runner supports, Incoloy Tubular Heaters, SS Tubular Air heaters, etc.
• Temp Range - 40 °C to 500 °C
• Temp controller having +/- 1 °C accuracy for lower temperatures and +/- 3 °C accuracy for higher temperatures

The available working chamber sizes are given as:

1	30 x 30 x 30 cms
2	35 x 35 x 35 cms
3	45 x 45 x 45 cms
4	45 x 45 x 60 cms
5	60 x 60 x 60 cms

We offer our range of tubular furnace for single and multi zonal. Our multi zonal tubular furnaces are designed to provide effective and durable services to the users. The provided specifications is given as:

• Temperature range up to 1500 °C
• resistance wire is provided in coil form wounded over a ceramic tube
• Utilize resistance wire heating element
• Provided with high grade low thermal mass insulation wool
• Ensure superior thermal uniformity
• Rapid heating up to the operating temperature
• Maintain good thermal uniformity
• Temperature is controlled by Microprocessor based PID Controller
• For temp upto 1500 °C, Silicon Carbide rods are provided
• Power saving up to 30-35%.
• Accuracy of +/- 1 °C inside the chamber

We offer our range of hot plates, which are used for uniform heating of samples in various laboratories. The specifications, in which our range is available, are:

• Double Decker type
• Mild Steel base
• Epoxy powder coated
• Cast Iron machined top plate
• Hi-tech Insulation provide heat concentrated at the top only.
• Heating is done By high grade 80/20 Nichrome wire
• Nichrome wire in coil form with ceramic glass and beads sleeving.
• Maximum surface temp is 300 °C
• Temperature control by Thermostat, 3- Heat Switch and energy regulator