Bitumen Testing Equipment,Benkelman Beam,Bitumen Extractor,Marshal Stability Test Apparatus,India

Bitumen Testing Equipment

We offer to our clients a wide range of bitumen testing equipments, which are used to determine the stress strain characteristics of a bitumenous mix. These equipments are made a per BIS, BS, ASTM & DIN standards that provides them higher performance and longer life. All these equipments evaluate pavement performance and are used to conduct permanent deformation tests. We also test our product range on various specification before sending them at the clients end. The range of testing equipments we offer include:

Benkelman Beam

Item Code: HB64.50

Our range of Benkelman beam, which is used for determining the deflection of flexible pavements under the action of moving loads. These consist of a 365 cm long aluminum beam in two halves arranged to give the lever arm ratio of 2:1.

The provision is made for leveling the apparatus and an anvil and a probe are fixed in opposite directions on the beam. Further, we also provide a buzzer for removing friction in the bearings.

In addition to this, we also provide on the same pavement and clamping, spring loaded clamp for movement of the assembled beam to different test points. Apart from this, the beam can be leveled by fine and coarse adjustments provided for the purpose.

Add to Enquiry Basket

Bitumen Extractor

Item Code: HB64.30

Our range of bitumen extractor are used for determining the quantity of bitumen in hot mixed paving mixtures and pavement samples. These are incorporated with bowl, which is coupled directly to a motor through flexible coupling. Further, we also provide a variac is that is preset to give 3500 r.p.m. to the bowl. Moreover, our range is suitable for operation on 220 V, single phase, 50 Hz supply.

Add to Enquiry Basket

Marshal Stability Test Apparatus

Item Code: HB64.505

Our range of Marshal stability test apparatus reduces uncertainty in manually recording of the readings load unit and other accessories are the same as supplied in HB64.05 except that it has digital display unit for indicating of load and flow since the unit is micro processor based it records the flow at maximum load.

This range comprises of the following:

Load frame 25kn cap
Rammers
Moulds
Breaking head assembly
Digital display
Load cell 50 kn
Displacement sensor along with flow meter +20mm

Add to Enquiry Basket

Automatic Bitumen Compactor

Item Code: HB64.10

We offer automatic bitumen compactor, which is a new ‘HEICO’ compactor automatically stimulates hand compaction as specified in ASTM D-1559 and develops a uniformity in the test procedure.

These consist of a chain drive coupled to the motor through a gear box and carries a locking device, which lifts and releases the hammer through a specified height. Further, our range is fitted with a counter that trips the motor automatically after 50 or 75 strokes as set on it. In addition, our products are suitable for operation on 220 V, 50 Hz, single phase supply.

Add to Enquiry Basket