The Orthodyne Belgium UHP Analyzer for specially designed for UHP gases. These are known for its precision design and functionality. Further, it is subjected to stringent checking process to ensure its high quality standards. The high temperature compensation and smart sensor recognition feature of this analyzer makes it applicable in various private and government organization.

Total hydrocabon analyzer for N2, Ar, He, and Air

General characteristics

• Continuous measurement system based on a flame ionisation detector.
• System controlled by microprocessor.
• Easy to use.
• Easy maintenance.
• Weak sample flow.
• Less power consumption.
• CE Analyser.
• Alphanumeric screen 8 x 40 characters, 64 x 240 pixels
• Multifunctional and real-time software.

Dimensions

Height .....4U

Width.....19'

Depth.... 450 mm

Technical characteristics

0-1 ppm...display resolution 0.01 ppm

0-10 ppm ... display resolution 0.1 ppm

0-100 ppm ... display resolution 0.1 ppm

Accuracy : 0.5% of the reading scale

Detection limit < 0.05 ppm on the range 0-1 ppm

(0.5 % over a longer period)

Gas connections

Sample.... 1 /8" Swagelok SS

Air ... 1/8" Swagelok SS

H₂ ... 1/8" Swagelok SS

Sample flow ... ± 3 l/h

Synthetic air

Flow... 20 l/h

Pressure... 2 Bar

Quality... 5.0

• Hydrogen

Flow...2 l/h

Pressure..... 1 Bar

Quality...6.0

Working Temperature ... ambient and stable temperature (± 20°C)

Power supply...220 Vac, 50-60 Hz

Consumption...500 VA

Output 4-20 mA... 1 output for THC impurity

Connector RJ-45 ... computing maintenance of the system

Output relays ... (dry contacts, SPST 2A / 250 Vac)

1 STATUS contact relay (security alarm)

3 RANGE contact relays (active range)

1 process alarm contact relay (level 1)

1 process alarm contact relay (level 2)

2 contacts for automatic calibration

Three ranges :

1. 0-1 ppm display resolution 0.01 ppm
2. 0-10 ppm display resolution 0.1 ppm
3. 0-100 ppmdisplay resolution 0.1 ppm

Accuracy :

5% of the reading scale

Drift  : 1 % during 24 hours

Gas Connections : 1/8’’ Swagelok SS

Sample flow : ± 4 l/h

Max Input Pressure : working pressure from 0.2 to 1.5 Bar

Working Temperature : Ambient and stable temperature (± 20°C)

Power supply : .220 Vac, 50-60 Hz

Consumption : 500 VA

Output 4-20 mA : 1 output for N2 impurity

Connector RJ-45  : Computing maintenance of the system

Output relays  : (dry contacts, SPST 2A / 250 Vac)

General characteristics

• Continuous measurement system based on the
• System controlled by microprocessor.
• Easy to use.
• Easy maintenance.
• Weak sample flow.
• Less power consumption.
• CE Analyser.
• Alphanumeric screen 8 x 40 characters, 64 x 240 pixels.
• Multifunctional and real-time software.

Dimensions

• Height : 4U
  
• Width  :19"
• Depth : 450 mm
• AZ 5000

• Argon

• Analog Input
• Analog Output
• Relays
• Remote access
• Calibration Param
• Alarm Levels
• Range
• Load/Save

Flame Ionization chromatographic detector. The FID 50 (GC FID Detector) is a standard 19" rack module, 4U high. Rackable unit combining a detector and a data acquisition system.

Unit to be used in combination with a system of chromatographic valves and columns. Analyzes impurities in different gases.

Characteristics:

• A Oxidizing gas Synthetic Air - Pressure 2 bars – flow 20 l/h
• H2 combustible gas – Pressure 1 bar – flow 2 l/h
• Carrier flow between 2 and 6 l/h
• Carrier gas argon, nitrogen, helium or hydrogen
• One chromatographic input
• 1 input for continuous signal
• 6 digital inputs
• 16 output relays – 220 Vac 1A
• 1 LPT printer output
• output 4-20 mA for maximum 8 impurities
• 2 RS232 outputs
• Memory potential of 20 chromatographic data
• Linearity +/- 1%
• Detection limit < 1 ppb