Copper Alloy Products

We supply copper pipe fittings as per the following specification:-

Range : 1/2" OD TO 6" OD IN 18swg, 16swg, 14swg, 12swg, 10swg

Type : SEAMLESS / WELDED

Copper Buttweld Pipe Fittings
Form

• Elbows in Long & Short Radius in 45 deg, 90 deg, 180 deg.
• Equal, Unequal Tee
• Bend
• Reducer
• Caps
• Long & Short Stub End.
• Swage Nipple & Barrel Nipple.

Copper Forged Pipe Fittings
Range
Forged Fittings : ¼” NB to 4” NB in 3000 LBS, 6000 LBS, 9000 LBS

Type : Socket Weld (S/W) & Screwed (SCRD)

Form : Elbow 45 deg & 90 degree, Tee , Union, Full & Half coupling, Cross, Cap, Swage Nipple, Plug, Bush

Olet’s : Weldolet, Sockolet, Elbowlet, Thredolet, Nipolet, Letrolet, Swepolet

Other Form :

• Hydraulic Fittings
• Instrumentation Fittings

Copper Pipe Fitting
Grade : De-oxidized & Electrolytic 99.9%


Test Certificate
Manufacturer Test Certificate as per EN 10204 / 3.1B

We supply and export copper pipe as per the following specifications:-
Range : 1½” OD to 6” OD in 22swg, 20swg, 18swg, 16swg, 14swg, 12swg, 10swg.

Length : Single Random and Required Cut Length

End : Plain End


Copper Pipe
Grade : De-oxidized & Electrolytic 99.9%

Test Certificate
Mill Test Certificate as per EN 10204 / 3.1B

Range : 6.35 mm OD upto 254 mm OD in 0.6 TO 20 mm thickness.

Type : Seamless

Other

• Capillary Tube
• Boiler Tube
• Precision Tube

Length : Single Random, Double Random & Required Length

End : Plain End, Bevelled End

Copper Alloy Tube :
Copper Tube : Electrolytic / Dioxide

Copper Nickel Tube / Cupro Nickel Tube :
ASTM / ASME SB 111 UNS NO. C 70600 ( CU -NI- 90/10) / C 71500 ( CU -NI- 70/30) / C 71640 ( CU-NI-66/30/2/2)

Admiralty Brass Tube :
ASTM / ASME SB 111 UNS NO. C 44300 ( ALLOY 443)

Value Added Services

• Draw & Expansion
• Bending

Test Certificate
Mill Test Certificate as per EN 10204 / 3.1B

Product Description


Copper Strip find many applications as Electrical Conductors, Switch Terminals, Hardware used in Electrical Circuits, Electrical Contacts.

These copper strip products are available in Hard, Half-hard and Soft condition.




General Properties:


Material with minimum Copper content of 99.9% as per IS 191
Size:
Width 3 mm to 160 mm
Thickness o.5 mm to 10 mm.

Product Description
Copper wire rods and copper wire pipes are Forged / Hot Rolled / Extruded and Cold worked to the required dimension to produce copper rods and copper pipes.

The products including copper wire rods and copper wire pipes are available in hard, Half-Hard and Soft condition.


Material with minimum copper content of 99.9% as per IS-191.
Size: 12mm to 160mm dia in shape of Round, Hex and Square.

The Copper tubes that we manufacture are extensively used in Air conditioning systems. The use of copper tube in air-conditioning and refrigeration systems has grown steadily in recent years. This is in large measure due to the inherent properties of the copper metals and their unique abilities to meet the needs of the ACR industry. Stringent new requirements, including demands for increased operating efficiency and the reduction or elimination of harmful emissions, have led to a new appreciation for copper tube's role in product enhancement


Product Specifications -
Weight Calculation
(OD-WT) x WT x 0.0281 = KGS/ MTR

Copper Tubes, manufactured by us, can also be used for general engineering. In residential buildings and small one- and two-story commercial buildings, the drainage piping is usually straightforward in design and simple in installation. Type DWV copper tube, installed with good workmanship by an experienced plumber, will provide many years of trouble-free service.

Copper DWV tube has been used successfully for years in all parts of drainage plumbing systems for high-rise buildings-for soil and vent stacks and for soil, waste and vent branches. Copper tube's lightweight and the ease with which it can be prefabricated have been especially important in high-rise drainage systems.




Chemical Requirements:

Copper Tube (Incl. Silver)

99.85% Min.

Copper Tube (Incl. Silver)   99.85% Min.
Phosphorus                             0.013 to 0.5%
Total Impurities                     0.06% Max.

Copper Tube to BS EN 1057 - R250 (Previous Designation BS 2871: Part 1: Table X) Half Hard Straight. This products is supplied in 3 or 6 meter straight lengths in the half hard condition, an ideal temper for cold bending and forming. Mexflow Tubes can be easily bent on an appropriate bending machine for 6 to 22mm O.D. sizes, with a bending spring. Its ease of manipulating and relatively light weight, combine with its ability to withstand high internal pressure makes Mexflow the ideal products for most hot and cold water, central heating and gas services installations.

This is the general-purpose copper tube for above ground services. Ideal for Drinking Water, Central Heating, Sanitation, Hot and Cold Water, Industrial & Medical Gas Transportation, Various Engineering.


Also as per BS EN 1057-R220
(Previous Designation BS 2871: Part 1: Table Y) Supplied as either 6m long half-hard straight lengths, or annealed 25m or 23m long coils. With a wall thickness approximately 1.5 times thicker than "Mexflow", it is the ideal product for underground applications. The extra wall thickness also allows its use on certain pressurized stem installations with maximum working temperature of 65°C. These copper tubes are recommended for use on underground services and are also suitable for: Drinking Water, Central Heating, Sanitation, Gas, Various Engineering Applications.

Mexflow Copper Pipes are available with IBP Conex fittings for the complete Copper Plumbing solution