We offer clients steel shots that are not only superior in quality but also work with precision in the desired applications. Found to be highly useful in various de-burring applications, these are used in applications for components like:

• Castings


• Forging


• Fabrication


• Spiral springs


• Steel torsion springs


• Automotive components

Hi-Tech Abrasive	Steel Shot
Shape when new	Spherical
Screen Analysis	As per specification of IS4606/1983
Chemical Analysis	C % - 0.6 to 1.25
	Mn % -1.25 Max
	Si % - 0.20 to 1.10'
	S % - 0.080 Max.
	P % - 0.080 Max.
Hardness	400 to 500 HV Ave
	lowest & highest individual range from 375 to 550 HV Ave
Density	7 gm. / ml. Min
Micro-structure Examination at 500X	Tempered Martensite

The range of steel grit offered by us
are manufactured by crushing fully hardened shot, screening the
resulting media & tempering it to a desired hardness. These are
produced under controlled manufacturing process to achieve end
product bearing uniform hardness, density & micro structure,
coupled with needed toughness for durable operations.

Applications:

• 
  Grit work best in tumblast
  applications where eccentric rebound aids coverage
  
  


• 
  It is used in coating and/or rust
  removal where speed of cleaning plays a critical part and somewhat
  rough finish is acceptable
  
  


• 
  for grinding wheels
  
  

Hi-Tech Abrasive	Steel Grit
Shape when new	Angular
Screen Analysis
Chemical Analysis	Carbon>>0. 85%
Hardness	750 to 860 HV Ave
Density	7.3 gm. / ml. Min
Micro-structure Examination at 500X	Martensite Completely fine & uniform

We manufacturer duptex steel ingots of sizes 75 mm 100 mm 1525 mm confirming to IS 2830/2831 standard, which are supply to local and near by state rolling mills where it is further given the shape of angles, channels, door, flats, round, etc.

The range of ingot moulds manufactured by us are available in cast iron and other finishes, which meet the international specification and standards. Our well developed pattern shop assist us in flawlessly preparing ingot moulds as per the prevailing market demands.

We hold expertise in wide range of ferrous and non-ferrous castings & components. These are available in varied metal choices including:

• Pig iron


• Phosphorus Bronze


• Aluminum Bronze


• Leaded Tin Bronze


• Brass


• Gun Metal


• Aluminum and others