Hindustan Syringes & Medical Devices

Vaku-8 & Vaku-8⁺ with safety shield for accessing difficult veins for blood sampling by utilizing the wings to control needle placement. The wings ensure no trauma due to rolling of needle and minimizes the chances of vein perforation. Distal vein wall puncture aside from causing patient discomfort due to repeated pricks can result in increased chances of Phlebitis and other related problems.

A non latex rubber sheath envelops the needle of the multiple sample adaptor, automatically retracting as the needle penetrates the vacuum tube stopper, and upon withdrawal recovers the needle.

This sheath helps in avoiding accidental needle sticks to personnel using it, as well in avoiding blood spillage. The screw thread below the needle of the multiple sample adaptor fit any standard vacuum tube holder.

With Vaku-8⁺, there is safety shield for covering the needle post use to prevent accidental needle stick injury.

Advantage

• In winged collection set apart from drawing, infusion can be also given.

• Chances of vein cross perforation are minimized due to comfortable placement of wings, and rolling of needle is avoided.

• During the Phlebotomy , once the Phlebotomist puncture the vein , instant flash back of blood is seen in the PVC tubing thereby confirming successful Phlebotomy . If in the PVC tubing blood is not seen then the Phlebotomist has to redo the Phlebotomy.

• Any lateral movement while holding/handling the blood collection tube with a standard needle can cause trauma or vein perforation. The flexible tube in Vaku-8 & Vaku-8⁺ allows the freedom of movement and minimizes the risks.

Components

• FLEXIBLE WINGS with textured surface easily punch together to provide a secure grip.

• NEEDLE is with short bevel which minimises chances of vein perforation.

• KINK-RESISTANT TUBING assures continous flow.

• FEMALE LUER LOCK Connector for secure fitment.

• SELF SEALING NON LATEX PROTECTION SHEATH automatically cover needle before & after insertion.

Component

• Top Needle Cover - Top cover are made of medical grade PP. It give protection to needle from damage.

• Lower Needle Covers - Lower covers are made of medical grade PE.

• Needle Tube - Needle tube is made from cold roll stainless steel. The needle tube is thin walled which allows a larger internal diameter resulting in improved flow rate.

• Needle Tube Sheath - Flexible rubber tube covers the backside of needle tube. This act as end blood stopper when needle is withdrawn from sample tube.

• Siliconised Needles - To minimize trauma and with short Bevel to minimize risk of vein cross perforation.

Shelf Life

The shelf life of product is 3 years from the date of manufacturing.

Precautions

Before use check for sterility assurance and tamper evident sealing.

Specifications:

• Techno Cut and Glass Van Scalpels are made from Swiss Steel blades with ergonomically designed handle for better feel & precision.

Components

• Blades: Made of Swiss Steel.

• Packing: Easy Peel Blister Pack in Medical Grade paper complying with EN 868.

• Precautions: Before use, check the integrity of the sealing of the pack.

Glass Van & Technocut blades are made from premium-quality, Swiss steel. A great deal of effort has been put into perfecting the grinding and honing process, as a result of which the cutting edges are consistently sharp and of the highest possible standard.

Specifications:

• GLASS VAN & TECHNOCUT Surgical Blades

• Made from the premium quality Swiss steel.

• Available in 10, 11, 12, 15 size for small size fittings (Handle No.3) & in 20, 21, 22, 23, 24, & 25 sizes for large size fittings (Handle No.4).

• Treated with Gamma radiation of 2.5 Mrad to ensure sterility assurance level of 10^-6.

• Blades are individually packed in a aluminium peel-able package which is protected by VCI coated paper lining.

Components

• Blades are made of premium quality steel.

• Packing: Blades are individually packed in an aluminum foil, peelable package, protected by VCI- coated paper lining.

• Precautions: Before use, check the integrity of the sealing of the pack.

Moulded from nontoxic, medical-grade PVC compound and assembled on totally automated assembly machines with needle points inspected by electronic vision Camera systems, to ensure minimal pain.

Specifications

• Infusion set with push fit type of cap.

• Siliconised needle with short bevel three facet needle point.

• Ideal for short term delivery of drugs or perfusion of blood.

• Reference : HMD's specification

Components

• Luer Adapters are made of nontoxic, medical-grade polyvinyl chloride compatible with any injectable medication, have a 6% luer taper as per ISO:594

• Wings are made of medical-grade flexible P.V.C and are colour coded for instant identification of the desired gauge.

• Link Tube is made of kink-free, nontoxic, medical grade flexible P.V.C

• Cannulas: 3-facet,lancet-point, burr-free made from SVS- 304 stainless steel.

• Packing: The S.V sets are individually packed in transparent, thermoformed, peelable blister packs.

• Precautions: Before use, check the integrity of the sealing of the pack.

Manufactured using premium-quality, cold-rolled stainless steel strips with the latest Japanese Technology, Dispovan and Unolok needles are ground on high-precision machines and assembled and packed on totally automated machines with vision camera quality controls for enabling superior sharpness to ensure injections with minimal pain.

Specifications:

• Made from imported cold rolled stainless steel strips.

• Tips of the needles are ground on high precision CNC machines.

• Siliconised, minimizing drag during penetration and withdrawal.

• Needle point is checked by vision camera system.

• Manufactured as per IS : 10654 /ISO:7864.

Components:

• Needle Hubs: are made of non-toxic, medical-grade polypropylene compatible with any injectable medication.

• Cannulas: BURR FREE 3 FACET LANCET POINT are made from SUS stainless steel.

• Packing: The needles are packed in tamper-evident, blister packs having easily peelable, fibre-free, imported, medical-grade paper to ensure reliability of sealing and product sterility.

• Precaution: Before use check the integrity of the sealing of the pack.

Specifications

• Material: The Safety boxes shall be made of Duplex Craft Board.

• Dimensions: 285 x 255 x 160 ± 5mm (External).

• Grammage: 900 GSM ± 5%.

Capacity