Complete range of Fire protection Fighting & Safety Equipments available under one roof

Other Products in Fire Protection are as follows:

Branch Pipe & Nozzles, Breeching & Adaptors, Blank Caps
Portable Foam Equipments (Lx, Mx Foam- Branches, Pourers, Generators, Inline Inductors, Mobile Foam Trolley)
Fire Monitors ,Monitors Nozzles
Stand Pipe & Stand Post
Sprinklers, Detectors
Fire Man Axe, Collecting Heads, Strainers, Pumping in Breech, Air Release Valve

Other products in safety or personal protective equipment are as follows
Breathing Apparatus,
Nose Masks, Respiratory Masks
Emergency Kits
Fire Blankets, Safety rope Ladder
Siren, Safety Torch, Nylon Safety Net, Barricading Tape, Welding Glass

"A B C" Stored pressure type Dry chemical powder fire extinguishers: This ABC fire extinguisher is useful for fires of class A, B & C types which involve wood, cotton, flammable liquids, grease, electrical wiring, live machineries etc. The blanketing effect of ABC powder decomposes fire quickly. 
B.I.S. Specification: 13849
Capacity:1Kg, 2 Kg, 5 Kg, 10 Kg, & above with ISI Mark

CO2 type fire extinguishers: These products are useful for class 'B' & 'C' fires involving materials like fabric, oil spillages and delicate machineries. CO2 extinguishers fire by blanketing dilution of oxygen and cooling effects.
B.I.S. Specification: 2878
Capacity: 2, 3.2, 4.5, 6.5, 9 kg. & 22.5 kg with ISI Mark

Trolley mounted Dry chemical powder type fire extinguishers: These are useful for class B & C fires involving Oils, Fats, Solvents, Gases, Paints, Varnish, Electrical Wiring and Live Machineries. Dry chemical powder extinguishes fire by beating, displacement of air and decomposition of dry powder effects.
B.I.S. Specification: 2171 & 10658 :
Capacity: 5kg, 10 kg, 25kg,50 kg,75 kgs with ISI mark 

Mechanical foam (AFFF) type fire extinguishers: These are used for Class 'A' & Class 'B' fires involving flammable liquids such as Naphtha, Paints, Solvents, Tar, Varnish, Benzene Camphor and fats like Grease and Oils, Solids like Resins and Oils, Pigments. Foam extinguisher controls fire by blanketing (Cutting off atmospheric supply of oxygen to the burning surface) and cooling down the container and the contents.
B.I.S.
Specification: 10204 & 13386 :
Capacity: 9 ltr & 50 ltr with ISI mark

Clean Agent Fire Extinguishers

1. Oblique Type Hydrant Valves: A range of Hydrant valves are manufactured to suit various requirements as given below. We also manufacture ISI marked Hydrant valves to Indian standard IS:5290, as also satisfying requirements of other agencies such as MMD (Mercantile Marine Dept).
Item Description : 63mm Single outlet Landing Valve as per IS:5290 Type A, ISI Marked, having 75mm NB inlet & 63mm Female Inst. Outlet.
Ref. Standard : IS:5290 Type A
Material of construction: Gunmetal IS 318 LTB2/ SS304/ SS316 (or as per client specification).
Inlet : Flanged (as per client requirement)
Outlet : Generally Female instantaneous (Male Inst. Outlet available on request)
Size : 38mm to 63mm

2. Double Control Type Hydrant Valves:
Item Description: 63mm Double controlled Hydrant Valve, 100mm NB Inlet &63mm, 2 nos. Female Inst. outlet as per IS:5290 Type B.
Ref. Standard: IS:5290 Type B
Size : 38mm to 63mm

3. Right Angle Type Hydrant Valves:
Item Description : 63mm Fire Hydrant Valve Right Angle, having 63mm NB inlet & 63mm Female Inst. outlet.
Ref. Standard : BS:336
Material of construction : Gunmetal IS:318 LTB2/ SS304/ SS316 (or as per client specification).
Inlet : Flanged (as per client requirement)
Outlet : Generally Female Instantaneous (Male Inst. Outlet available on request)
Size : 38mm to 63mm

1. Type A - C P Fire Hoses: Controlled Percolating Hose.
All Synthetic fibre, circular woven jacketed, controlled percolating fire hose
Specifications:
IS 8423/1994 - TAC approved - Bearing ISI mark - Flame Resistance

2. R R L Fire Hoses: R R L Non-percolating Hose
Externally Elastomeric coated all synthetic jacketed, rubberised fabric reinforced rubber lined (R R L), non percolating flexible fire fighting delivery hose
Specifications:
IS 636/1988 Type A - BS 6391 Type - 1 - TAC approved - Bearing ISI mark

3. Type B - 3 Layer Fire Hoses: Type B Non-Percolating Hose
Non percolating flexible fire fighting delivery hose, three layered synthetic jacketed, with elastomeric outer covering
Pressure Ratings:
Burst Pressure 42kg/cm2 - Proof Pressure 25kg/cm2 - Working Pressure 18 Kg/cm2
Specifications:
IS 636/1988 Type B - BS 6391 Type - B - TAC approved - UL/Llyods Approval
Sizes Available:
38mm, 50mm, 70mm, 63mm
Lengths Available:
15mtrs, 18.3mtrs, 22.5mtrs,30mtrs, or any other lengths

Hose Boxes
Single Door and Double Door Hose Boxes are available.
Material of construction: M.S. Sheet 16 to 18 SWG/FRP
1. Single Hose Box: For accommodating 1 No. 15 Mtr Hose/ 2 Nos. 7.5 Mtr Hoses and one nozzle.
Approximate size: 450mm x 600mm x 250mm (for IS; 636, Type B hoses, the recommended size is 600mm x 600mm x 250 mm)
B. Double Door Hose Box: These are used for accommodating 2 No. 15 Mtr Hoses and one nozzle.
Approximate size: 750mm x 600mm x 250mm (for IS; 636, Type B hoses, the recommended size is 900mm x 600mm x 250 mm)

Hose Reels
Hose Reels are manufactured as per IS: 884. Swinging (vertical) type is made for use with ½" and ¾" Hose and horizontal type is made for use with 1" to 1½" .
Material of construction: M.S. Sheet 18 SWG and non-corrosive working parts.
Hose: PVC braided hose.
Shut off nozzles: Gunmetal/SS304/ABS Jet and Diffuser type nozzles available

1. PVC SUIT: Made out of leak proof, 0.2mm thick, heavy duty laminated bright yellow colour PVC material, Acid/Alkali proof. Ideal against chemical splashes. Suit consists of Hood with replacable visor, free size pant and coat duly ventilated, available with zip or buttons.

2. ASBESTOS SUIT: It is made from Regular (S 20) or AMC-41/45 Asbestos Fabric with heavy duty flannel pasted with synthetic solution. It consists of one piece overall, hood with replaceable visor, pair of Hand Gloves and Boots. It is ideal for protection against heat.

3. Aluminised Fire Proximity Suit : Made out of three layers. Outer layer of "GENTEX" brand Dual mirror five ply, imported from USA - Aluminised glass fibre fabric. This fabric is tested and approved by Centre for Fire Explosive and Environment Safety - CFEES - New Delhi (Formerly known as DIFR). Second layer of Neoprene rubber coated glass fibre fabric which acts as vapour barrier and inner layer of woolen fabric.
Complete suit consist of-One piece coverall with pouch on back to house B.A.Set, A hood with visor. A pair of five finger gloves, A boot with leather lining, anti skid design Neopre rubber sole, zip fastner. Size of boot 7,8,or 9 and height will be approximately 7" Complete suit acked in bag.

4. NUCLEAR BIOLOGICAL CHEMICAL PROOF SUITS (NBC SUITS) like Gas Tight suits/Chemical Splash/Tychem Gas tight etc. Suit made from fire retardant fabric.

5. Aprons

6. Reflective Vest: Safety Jackets

1. Rubber Gloves :- Industrial Rubber Hand Gloves Orange / Red Colour Superior quality acid and alkali proof sizes 10" to 22" long, made from natural rubber latex, heavy duty application in pharmaceutical, Fertilizers, Industries and chemical Plants. Available size :- 10" to 24" .

2. PVC Gloves (Supported):- PVC Yellow colour Hand Gloves (Supported) Cotton Lining inside, Best Quality gloves designed to give maximum resistance against Acid and Alkali's, Oil, fat fuel, Printing inks, Inorganic Salts, Dyes, bleaching agent Abrasive material, Steam and grease. Size :- 10"to 24" .

3.Asbestos Gloves:-Asbestos Hand Gloves with inside cotton Lining for resisting Heat upto woolen, leather, flannal, 100° to 1000°C varied temperature in various. Five figures type, mittan type, with leather palm reinforcement. Size :- 10" to 24"

4.Aluminised Gloves:-Excellent for fire proximity and molten metal splash. Aluminized front and back reflects 90% of radiant heat keeps hand protected to withstand temperature upto 1200°C. Size :- 10" to 22" long

5.Kevlar Gloves:-We also offer special application gloves for heat and cut resistance purposes

6. Nitrile Gloves:-The nitrile gloves features specially formulated butadiene-acrylo-nitrile latex. These nitrile gloves have the physical characteristics of being highly flexible and comfortable for industrial hand protection.

Helmets are available in variants like "helmet – hdpe", helmet with faceshield and helmet with earmuff. HDPE Helmet is available with adjustable Headband and Chinstrap .
Faceshield is available in sizes: Small-(500/540 mm); Medium-(540/590 mm); Large-(590/640 mm)
Earmuff is available in Slot fix design and easy clip on ear muff.

Features of this product are:

• Made from light weight, high impact/chemical resistant HDPE (High Density Polyethylene Thermoplastic)
• Adjustable six point head harness with sweat band.
• Protects entire head from any impact.
• Adjustable nape strap secures helmet firmly in position and eliminate conventional chin strap.
• Specially designed brim gives additional lateral protection.
• Slot fix design helps easy clip-on of ear muff and face shield.
• Available in 5 standard colors white, red, green, blue and yellow.

Safety belts
1. General Safety Belts:- General Purpose harness. Man hoisting safety belt is used for all general duties where mobility is essential. Consist of one waist belt and two shoulder straps attatched with three adjustable friction buckles and a 'D' ring at the back to attach life line (Rope) with hook..

2. FULL BODY HARNESS:-Ensures Safe fall protection to arrest falls and facilitates rescue and evacuation operations. Product design ensures sufficient distribution of fall impact to various parts of human body
Life line of Nylon 10/12 mmØ. P.P. Rope, 16/18 mmØ or Manila 16/18 mmØ are attached at one end to 'D' ring in belt and another end with various hooks. Both the ends of life line are duly sliced with sheep skin leather for safety

Safety Shower and Eye Wash Fountain:
Safety Shower and Eye Wash gives an immediate deluge of water that dilutes and washes away harmful material, such as caustics, acids, fire, radioactive material... Shower's heads give a oncentrated flow of water in a drench column and cannot be clogged. This is the least expensive and most practical method

Combination of safety Shower & Eye wash Fountain: Includes Shower, Eye Wash (Pedal (foot) operated / Hand Operated)

Eyewash Fountain units: Includes
Bowl: In highly visible yellow ABS anti-corrosive plastic or steel.
Spray: Two high flow sprays aerated at low pressure which bathe the eyes and face of the injured person, with automatic anti-dust cover, which operate when the Eye Wash is used.
Coating: Made from highly visible yellow anti-corrosive plastic.
Valve: Through-passage valve which opens automatically when the lever is pushed, and the valve stays open until it is manually closed.

1. FACE SHIELDS-Swivel and adjustable clear acralic face shield with elastic head band and sweat band available in sizes- 6"x9", 9"x9", 9"x12" useful again splash or while grinding.
'A TYPE' FACESHIELD- Peack and chin guard, full cover from side, adjustable swivel type wing nut/ratchet head band with sweat band available in sizes 6"x12" and 9"x12" with clear/colour visors. Ideal for full face protection.

2. Safety googles- To protect eyes from chemical & other substances

3. Ear Muff-Scientifically designed for maximum attenuation (@45db breaker) and comfort for Extended use. Exceptionally light weight and attractive - made with easily adjustable cushion padded head band, rotating 360° with long life chrome plated springs, shaped muffs with cushion or liquid filled liners. And the big plus is, it is DURABLE. (Performance tested as per IS 6229-1988) These muffs are available in ABS Plastic Head Band also.

Road safety equipment category includes: High Visibility Vest, LED Batons, Speed Retarder, Road Stud, Traffic Cones, Floor Stand, Crash Barriers, Convex Mirror and many more...