Features:
• Four stages of fold-able and removable handle saves the handle force during the operation.
• 360 deg. Rotary socket.
• Self contained hydraulic pump and puller body with integral safety valve.
• Heat treated and chrome plated hydraulic cylinder rod provides linear force.
• Easy release valve.
• Spring loaded live centering nut (removable)
• 2/3 combination puller cross head with manganese phosphate plated for rust proof and durability
• Heat treated forged alloy steel cross bolts and jaws with manganese phosphate plated.

2/3 Jaw Hydraulic Puller & 2 Leg Bearing Pulling Attachment with in Built Hydraulic Pump

Capacity	Model No.	Stroke (mm)	Reach (mm)	Spread (mm)	Weight (kg)
4 Ton	PM-420	60	185/250	255/110	4.5/8.5
6 Ton	PM-620	60	185/250	255/110	4.5/8.5
8 Ton	PM-820	85	229/270	350/220	6.5/12.5
10 Ton	PM-1020	85	229/270	350/220	6.5/12.5
12 Ton	PM-1220	85	269/381	375/290	8.0/19.0
15 Ton	PM-1520	85	269/381	375/290	8.0/19.0

Product Highlights

• Master Sets
• Tools Storage
• Eliminator™ Ratcheting System
• Socket Sets
• Hand Sockets and Driver Tools
• Impact and Power Sockets, Accessories and Sets.
• Industrial Wrenches and Sets
• Torque Tools
• Screwdrivers and Nut Drivers
• Pilers and Snips
• Punches, Chisels, Pry Bars and Hammers
• C – Clamps and Lifting Eyes (Eye Bolts)
• Related Hand Tools
• Pullers and Accessories
• Work Holding Tools, Cutting Tools and Shop Accessories
• Allen™ Hex and Sets
• K-D® Specialty Tools

We are engaged in manufacturing as well as export high quality pneumatic impact wrenches, which are widely used for various engineering applications. Some unique features of our range of Pneumatic Impact Wrenches are:
• Transparent
• Thermal insulating
• Very strong
• Unbreakable
• Low weight
• High rigidity
• Temperature resistant

Model No.	Square Drive	Hammer Mechanism	Bolt Capacity	Recommended Torque		Ultimate Torque		Working Pressure	Weight
				Kgm	Nm	Kgm	Nm
DP 320	1''	3-jaw system	M18-M45	80-170	785-1668	380	3728	6.3 bar	10.85 kg
DP 360	1-1 ½''	3-jaw system	M24-M55	120-300	1177-2943	540	5297	6.3 bar	14.9 kg
DP 361	1-1 ½''	3-jaw system	M24-M55	120-300	1177-2943	540	5297	6.3 bar	15.50 kg
DP 381	1-1 ½'' - 2''	3-jaw system	M30-M80	210-480	2060-4709	815	7995	6.3 bar	32 kg
DP 635	2-2 ½''	3-jaw system	M50-M110	550-800	5896-7848	2400	23544	6.3 bar	67 kg

Cold Water High- Pressure Cleaners
Model No.	Max Pressure (bar)	Max Delivery Rate	Power	Weight
EX20	130	450	2100 W (230V)	17
KW 24	145	540	2600 W (230V)	24
Ontario 1211 XP	30-125	345-690	3000 W (230V)	40
Ontario 2015XP	30-200	410-820	6000 W (400V)	48

	Hot Water High – Pressure Cleaners
Model No.	Max Pressure (bar)	Max delivery Rate	Temperature Max	Power	Weight
LKX 1515XP	150	330 - 660 (L/h)	140°C	4000 W (400V)	92 Kg.
LKX 2015XP	180	400 – 800 (L/h)	140°C	5500 W (400V)	95 Kg.
TEKNA 2015T	200	450-900 (L/h)	140°C	7300 W (400V)	170 Kg.
Professional 2021	200	630-1260 (L/h)	140°C	9700 W (400V)	195 Kg.

Technical Specifications
Hex Link Series

Model	Torque KgM	A mm	B mm	C mm	R mm	A/F mm	A1 mm	Body Weight Kgs
TTW-LW-400	400	220	170	45	50	30-60	250	2.15
TTW-LW-800	800	260	217	58	62	41-80	298	3.5
TTW-LW-1200	1200	315	248	62	75	65-95	348	4.5
TTW-LW-1600	1600	326	255	70	75	65-95	358	5.65
TTW-LW-3000	3000	393	323	90	95	85-115	446	11.25

Square Drive Series

Model	Torque KgM	A mm	B mm	C mm	R mm	Sq inch	A1 mm	Body Weight Kgs
TTW-LW-400X	400	191	139	48	34	1	224	2.25
TTW-LW-500X	500	238	170	52	44	1 ½	265	3.25
TTW-LW-800X	800	240	177	60	44	1 ½	275	4.25
TTW-LW-1200X	1200	275	215	66	48	1 ½	312	5.5
TTW-LW-2000X	2000	320	260	82	68	2 ½	370	9.5
TTW-LW-3000X	3000	360	286	90	72	2 ½	410	11.0

Auto Scrubber Dryer (HT 43 & HT 50)
• Two models to choose from
• Scrubs and dries floor in one pass increases cleaning efficiency by 3 to 5 times
• Ideal for large open floor areas like shopping malls, factories, hospitals airports, railways stations etc.
• Solution Recovery tanks made of S.S
• Can be used with pads also
• Designed for Indian Conditions
• Rugged performance & Low maintenance

Technical Specification
Sr. No		HT -473	HT -50
1	Scrubbing Width	430 mm	500 mm
2	Squeegee Width	736 mm	736 mm
3	Scrubbing Coverage	1290 m² / Hr.	1500 m² / Hr
4	Solution Tank Capacity	30 Lts	30 Ltrs
5	Recovery Tank Capacity	35 Ltrs	35 Lts
6	Vacuum	2000 mm WC	2000 mm WC
7	Air Flow	175 m³ / Hr	175 m³ /Hr
8	Brush RPM	165	165
9	No. of Brushes	One	One
10	Voltage	230 V AC 50 Hz	230 V AC 50 Hz
11	Brush Motor	1 H.P 1 Phase CSCR / TEFC	1.5 H.P 1 Phase CSCR / TEFC
12	Vacuum Motor	1100 W	1100 W
13	Weight	75 Kgs.	85 Kgs
14	Dimension	102 x 47 x 102 cm	110 x 57 x 102 cm

Spreading of pipe flanges in Petrochemicals, Sugar Plants, Cement, Chemical, Steel Mills, Power Plants & Other process Industries need not be a nightmare strenuous Harmer & Chisel that waste time & effort as well as age old technique of routine shop maintenance are been given a good bye. Powerjac recognized as an industries setting cost effective solution with the introduction of portable light weight Hydraulic Flange Spreader to separate long fastened pipe flanges. The complete portable unit.

The Compact portable unit should be used in pairs to provide even spreading force

Features:

• Light weight, compact design for ease of use
• Single acting, Spring Return Jack for Fast retraction
• Adjustable jaw width is for a better wide range of application
• Standard 60° Wedge is suitable for Normal Flanges 60° blunt wedge for wider spread flange & 30°
• Wedge for limited spread application which are optional.

Model	Capacity Tonnes	Stroke mm	Spread mm.	Weight kg
			Min.	Max
HFS -5	5	40	59	163	4.75
HFS-10	10	50	61	224	8.5

We are specialized in offering high quality multi purpose units, which are durable and are capable to drill in solid and soft objects. These are made from high quality materials and are easy to use.

Features:

• Exhaust diffuser for quiet operation.
• Lightweight engineered composite housing reduces fatigue and protects against cold temperatures.
• Quality ball bearing mounted motor.
• Safety-lock trigger prevents inadvertent operation.
• Ideal for smoothing weld seams, debarring, rust and paint removal.

Single Double acting cylinders centre hole cylinders, Low profile cylinders capacity 10,20,30,60 tons

1. The terminal compressed tool is suitable to the specifications of DIN,AWG,JIS.

2. High speedy two-section type, when low pressure reaches, will be voice of "KA CHA" of safe protective equipment.

3. One person can operate it, time saving and labour saving.

4. To connect with pump of design, the head compressed can be revolved 180 degree.

The bearing fitting tool kit manufactured by HI-Tech consists of 5 impact sleeves and 33 impact rings. The sleeves impact surfaces and rings are made of super tough, light weight, impact resistant,ultra high molecular weight (UHMW-pe) ploythene. The rings are made to fit diverse combinations of impact sleeves. With this kit one can mount more than 200 types and sizes of bearings between a bore diameter of 10mm to 50mm with precision and accuracy each sleeves can accomadate 200mm (8") projecting shaft length. The kit comes in a suitable case.