3 valve manifold:
We provide 3 valve manifolds pipe to pipe (R), pipe to flange (T) and flange to flange (H) designed for connecting system impulse lines & transmitters. These manifolds consist of 1/2" NPT(F), pipe to flange or flange to flange connections on 54mm (2 1/8") centers, and of one equalizer valve, two block valves and 2 nos 1/4" NPT(F) purge (VENT) connections. These manifolds are rugged in construction to withstand high pressures and temperatures. Our manifolds are rated for pressures as high as 6000 PSI at 200 o F or 4000 PSI at 500 o F. with PTFE Packing. For a Higher Temperatures Grafoil Packing is used

5 valve manifold:
We offer 5 valve manifolds pipe to pipe (R), pipe to flange (T) and flange to flange (H) designed for connecting system impulse lines & transmitters. Our manifolds consist of 1/2" NPT(F), pipe to flange or flange to flange connections on 54mm (2 1/8") centers, and of one equaliser valve, two block valves, one Bleed Valve and 2 nos 1/4" NPT(F) purge (VENT) connections. These manifolds are rugged in construction to withstand high pressures and temperatures. The manifolds are rated for pressures as high as 6000 psi at 200 o F or 4000 psi at 500 o F. with PTFE Packing. For a Higher Temperatures Grafoil Packing is used.

Our check valves are specially designed & manufactured for flow control of fluids and gases in corrosive & hazardous environment. These valves are used in Process control, instrumentation and flow control applications.

Our valves are precision machined with designer durability and maximum efficiency to provide high quality and low cost alternatives in fluid and gaseous control systems of different applications, which is to meet the exact standards of our customers growing demands.

Features:
•Available in High Grade Stainless Steel, Bass materials
Pressure Rating

• 316SS – 1/8” to 3/4"- 5000 psig CWP (345 bar)
•1” – 3000 psig CWP (207 bar)
•Brass – 1/8” to 1” – 3000 psig CWP (207 bar)

Working Temperatures

• Viton seal -15° F to 375° F (-26°C to 190°C)
•Fluorocarbon Rubber -15° F to 400° F (-26°C to 204°C)
•Buna – N Rubbe -30° F to 275° F (-34°C to 135°C)
•Neoprene Rubber -45° F to 250° F (-43°C to 121°C)
•Orifice
•1.078” to 0.656” (2.0 mm to 16.7 mm)
•Cv Factor
•0.18 to 6.56

Working-Choice of fixed pressure cracking points from 1/3 to 25 psi (.02 to 1.75 bar ) or as per customers requirements. Valves may initially crack at higher than subsequent cracking pressure if are not actuated for a period of time.

•Variety of end connections includes Male /
Female threaded NPT, BSP, BSPT, ISO, DIN and JIS tapered pipe ends.
100% factory tested for both crack & reseal
•Complete Heat Traceability

We offer the valves which are used in process control, instrumentation and flow control application. They are specially designed and manufactured for corrosive and hazardous environment. In order to meet the demand of our valuable customers, these valves are of high quality and at the same time cost effective. Our needle valves are available as NPT,BSP,BSPT,ISO and DIN and the material used in the production are made of high grade Stainless Steel, Carbon Steel Brass and Monel, Hastellogy B/C, Titanium, Inconnel.
features of I.B. Needle valve

• One piece body construction for high strength and full safety.

• Non Rotating Vee / Ball tip design forms a bearing joint with the stem eliminates rotation between plug and seat at closure .This prevent scoring and galling up the valve seat and ensures long life in repetitive shut off service.

• Stem thread rolled and high plated gives additional strength and extended life.

• Mirror finish stem burnished to a 16rms for smooth stem operation.

• Stainless steel handle for proper accusation

We offer the valves which are used in process control, instrumentation and flow control applications. They are specially designed and manufactured for corrosive and hazardous environment. In order to meet the demand of our valuable customers, these valves are of high quality and at the same time cost effective. Our needle valves are available as NPT,BSP,BSPT,ISO and DIN and the material used in the production are made of high grade Stainless Steel, Carbon Steel Brass and Monel, Hastellogy B/C, Titanium, Inconnel.
features of H.B. Series needle valve:

• One piece body construction for high strength and full safety.

• V” tip design for accurate flow control.

• Stem thread rolled and high plated gives additional strength and extended life.

• Mirror finish stem burnished to a 16rms for smooth stem operation..

• Stainless steel handle for proper accuration.

• Dust cap to prevent contamination and avoids lubrication washout of bonnet assembly

2 way ball valve:
features of 2-way on-off switching models.


•Heavy directional black fenolic handle or lever handle.

•Blow-out proof bottom loaded stem. Low operating torque and with panel mounting facilities.

•Series of end connections 1/4" to 1" NPT, BSP. Male or female threaded ends and 1/4", 3/8" and 1/2" "HYPRO VALVES" single or twin ferrule tube fitting ends.

•Floating Ball design for positive sealing.

•Maximum Working Pressure : 6000 PSI (400 bar) at 20 o C to 250 o C with TFE Seat.

•High Pressure Ball Valve with 10,000 PSI (700 Bar) are available with polyamine or KEF-F seats, for high pressure diversion.

•Very robust and easy to maintain.

3 way ball valve :
features of 3-way on-off Switching Models.

•Heavy directional black fenolic handle or lever handle.

•Blow-out proof bottom loaded stem. Low operating torque and with panel mounting facilities.

•Series of end connections 1/4" to 1" NPT, BSP. Male or female threaded ends and 1/4", 3/8" and 1/2" "Hy-pro Valves (India)" single or twin ferrule tube fitting ends.

•Floating Ball design for positive sealing.

•Maximum Working Pressure : 6000 PSI (400 bar) at 20 o C to 250 o C with TFE Seat.

•High Pressure Ball Valve with 10,000 PSI (700 Bar) are available with polyamine or KEF-F seats, for high pressure diversion. Very robust and easy to maintain

Double Ferrule Imperial
• Male Connector PMC, Union PU
• Male Elbow PME , Union Tee PUT
• Male Adapter PMA, Union Cross PUC
• Bulkhead Male Connector PBMC, Reducing
Union PRU
• Male Run Tee PMRT, Elbow Union PEU
• Male Branch Tee PMBT, Reducer PR
• Female Adapter PFA, Bulkhead Reducer PBR
• Female Connector PFC ,Tube Cap PTC
• Bulkhead Female Connector PBFC, Tube Plug
PTP
• Female Elbow PFE , Nut PN
• Female Run Tee PFRT, Back Ferrule PBF
• Female Branch Tee PFBT, Front Ferrule PFF

Our Gauge Root Valves are designed for connecting system impulse lines & transmitters. These manifold consist of Single valve configuration which allows for easy isolation, calibration, block and bleed for gauges, pressure switches and static pressure transmitting instruments. We provide valves which are rugged in construction to withstand high pressures and temperatures. Our valves are rated for pressures as high as 6000 PSI at 200 o F or 4000 PSI at 500 o F. with PTFE Packing. For a Higher Temperatures we used Grafoil Packing. Our valve combine the functions of a tee, calibration valve, isolation valve and all tubing and fittings into a single compact unit thus reducing number of fittings and space required for installation.

Hy-pro Thermowells are recommended whenever a temperature element is to be inserted into a process where corrosion, pressure, abrasion or shear forces may threaten the life of the element. In addition thermowells allow form a defective instrument to be removed without shutting down or draining the process.

To manually inject different gases at desired pressure upto 140 kg/cm into the reactor from gas cylinder. The regulator comes with SS branded Teflon high pressure hose pipe(4m long),NRV, quick release coupling & pressure gauges.

we offer a wide range of quick release coupling. These couplings can be customised as per the client's requirements.