Hyden Plastics Private Limited

Hyden is one of the leading manufacturers of high quality, precision, and high productivity Pouch Making Machine and Center Seal Pouch Making Machine in India. Get best Center Seal Pouch and Pouch Making Machine from www.hydenplastics.com. We are always one step ahead in adopting new technology in the process of manufacturing our machines.

Plastic pouch machines make use of plastic films and laminates to manufacture high quality pouches which are further used by a large number of industries.

Drying of water and water-based lacquers requires a lot of heat energy to remove water. Hence, the line speeds of water based coatings were few meters per min.

HYDEN developed this new technique in 1999; It uses Infra red energy created by LPG & by directly drying the coating. It saves lot of energy & gives four times more line speeds. Know, this process of drying is used for wide web widths of 100” to as narow as 12” web widths.

This is a Gravure printing unit without drive. This was specially made for in line printing of pepsi tube and statutory text on carrier bags. This Gravure unit is placed after the treatment unit and just before the rewinding unit. This is the only process to print sharp and quality text on the web, as compared to Flexo printing. In long runs it is found to be very economical also. In line printing to the Extrusion avoid an extra process of printing. This avoids the extra cost of printing machine with good tension controlled rewinders. As the latest bag making machines accepts the 24 to 30” diameter rolls.

Our 3 side seal pouch making machine is capable of making pouches from PET PE laminates or BOPP PE Laminates. This machine delivers up to 150 pouches per minute. Get high quality Three Side Seal Pouch Making Machine at affordable price from www.hydenplastics.com. Hyden is the pre-eminent manufacturer and supplier of high-quality pre-made Three Side Seal Pouch machines in India.

HYDEN is specialist designer and builder of a wide range of slitting machines. We have a range of standard slitting machinery that will slit and rewind most materials including film, foil, paper and fabric. We can fit any knife type to our standard slitter like shear slit, razor slitting, crush cut slitting and heat slitting. We have detailed below the specification of one of our range of standard duplex Slitting machines.

Machines are available with centre winding, centre surface or surface winding. Single or duplex rewinds with lock core or differential winding systems. Knife systems for razor, crush cut, shear cut and heat cut are all available and including films from 12 micron to 3 mm, Papers from cigarette papers to heavy board, Fabrics from satin to sailcloth.

HYDEN Pilot Coating Machine is a small modular machine, which allows to use different coating systems Meyer-bar, knife over roll, air knife, hot-melt slot die applicator and consequently to reproduce many production technologies according to different substrates to use, products to apply and final items to make.

Hyden is engaged in supplying and exporting of Cut to Length, Point Cutting and Label Cutting machines. Get highly efficient machines for Label Cutting, Cut to Length and Point Cutting from www.hydenplastics.com. at best price. These machines are running successfully all over India which are exported world wide for packing various products.

• Unwind with Pneumatic Brakes.
• Pneumatic knife for speedy cutting.
• Perforation is adjustable by pressure of pneumatic.
• Printed and unprinted accurate label making.
• Maximum Label Size: 300 mm 300 mrn
• Speed: 275 PPM depending on size
• Motor Load: 0.5 Hp

HYDEN has been designing and manufacturing ink contact cable marking machinery for over 35 years. From offset ink printing to indent ink printing to plain contact ink printers, HYDEN has the right solution for your cable manufacturing requirements.

• Print interval: Two feet, one meter or half meter
• Cable size: 5 to 102 mm diameter 0.2 to 4
• Maximum speed Variable from 0 to 150 meters/minute
• Sequential marking accuracy: 0.3percent
• Print inserts: Engraved steel, gravure surface
• Character height: 1.6 mm to 9.5 mm, 1.6 mm

HYDEN manufactures a wide range of standard coating and laminating machinery and equipments We are specialists in the design and building of laminating machinery for many products and we have a standard range of laminating machines that have been designed variety of products. If we don't have a standard laminating machine that will suit your product, we can design a laminator that will suit your product and your budget. Our laminating machines are designed to laminate most of the materials and we have a built a wide range of machines over the last 20 years. We have a range of foam laminating machines that is designed specifically for foam and other difficult to laminate materials. If you require a laminator for any product at all, please contact us, we may be able to help.

The label punching machine is an automatic die cutter of labels and shapes. It is suited for producing different labels, stickers, trademarks etc in all shapes and sizes. Up and down movement of the columns is controlled by pneumatic system. The label puncher is an ideal post-press machine with advantages of high precision, time and labour saving and easy handling for roll to roll process.

This machine was developed in India by HYDEN in 1996 It was then displayed in PLASTINDIA exhibition. This is used for converting reverse printed PVC sheet into PVC label sleeve. It uses cold adhesive available locally.
The latest development in this machine is to coat a hot melt on printed side of heat shrinkable PVC, to restrict label from rotation on the container.

• EASY START STOP ACTION.
• AUTO GLUE FILLING SYSTEM.
• CONTROLLED TENSION WINDING.
• CONTROLLED DISPENSING OF GLUE.
• GLUING SPEED : 60 to 80m/min.
• THICKNESS OF PVC: 12 to 150 micron.
• MAX. UNWIND SIZE: 600 mm
• MAX. REWIND DIA. : 450 mm