Hydraulic Force EnterprisesHydraulic Force Enterprises

Our Products

Home Profile Contact Us



Overhead Transmission Tools



Hydraulic Compressor
Large View

Hydraulic Compressor

Hydraulic compressor

These machines are suitable  to  joint  aac/aaac/ acsr conductor & earth wire, the  hydraulic  compressor  mono  block  made  out  of  solid  en 8   steel,   the  cylinder assembly is finished after the accurate boring, machining, honing & hard chrome plating procedure. The ram made out of high carbon alloy steel, duly accurate machined, grinded  & hard chrome plated.


Capacity 100 ton 150ton
Ram Diameter 135mm. 165mm
Travel Of Ram 35mm to 40mm 35mm to 40mm.
Ram Retraction Through direction control valve. Through direction control valve.
O. D. Cylinder 225 +/- 5mm. 255 +/- 5mm.

 

Details Of Pumping Unit Diesel engine operated, supplied with piston radial pump.
Working Pressure 700 bars.
Piston Affected Area 214cm2 for 150 ton & 143cm2 for 100 ton
Valve & Standard Accessories Directional control valve, pressure relief valve, pump plate or bell housing, gear coupling or pulley, v belts, suction strainer, filter, air breather, oil level indicator, drain plug, pressure gauge, oil tank.

Note: - all valves & standard accessories will be reputed make
Diesel/ Petrol Engine Hose Pipe Hero Honda, Birla Yamaha, or Brigs & Stratton 5 h. P. 2 no. 10 meters each, working pressure 10000psi
Oil Tank Capacity Of Pumping Unit 35 liter.
Oil Used By The Purchaser Hydraulic oil, enclo 68.
Pressure Gauge 100mm.
Rubber Seals The machines have only one rubber seal with canvas reinforced contents in the ram. All other seals/ packing / gaskets have totally been eliminated for trouble free life.

Compression  dies are available  for  any type aac / aaac / acsr conductor & earth wire.   the  compression  dies  are properly machined, hardened & after that the  dies  are  duly  tempered  to release their internal stress for preventing the dies from breakage.   the  hardness   is  checked   on   45  to  50  rockwell.   our  all  the  dies are ground finished & anticorrosive treated for preventing from rust.  

Note:- Design, type, specification are provided at the time of enquiry.


Hydraulic Dynamometer

Hydraulic Products & Equipment
Hydraulic  dynamometer is precision design, portable, straight forward in construction. It is  suitable  for  taken accurate tension measurement like tensioning of cable/conductor in transmission  33 kv to 400kv line, cement pipe testing, tensioning of conveyors,  tensile force  control  testing,  tower  testing,  spring  testing, crane testing, chain testing & many other likewise tensioning test.     

It is made out of solid alloy steel duly machined, grind, & hard chromed plated. Two eye bolts with thrust bearing are provided for automatically adjustment it self to natural position. Accurate stainless steel pressure gauge is provided.


Capacity In Kg. Weight In Kg. Outer Diameter In mm Eye Hook Diameter In mm Length
1000 5 75 25 10
2000 7 85 30 12
3000 9 85 30 13
5000 13 110 35 16
10000 17 125 40 18
20000 25 150 50 20

Calibration  of  dynamometer  can  also  be  arranged  at  additional  cost from govt. Test house, new delhi 

Note:- Design, type, specification are provided at the time of enquiry.



Hydraulic Dynamometer
Large View
Hydraulic Cable/Conductor Cutter
Large View

Hydraulic Cable/Conductor Cutter

Hydraulic Cable/Conductor Cutter
These  machines  are  suitable  to  cut  any  required  point  of  the  cable, wire rope and aac/acsr conductor.

Specification of hydraulic cable/conductor cutter

  • Inbuilt  hydraulic  pump,  release  valve,  cylinder  assembly,  locking  device  and  "u" shaped blade housed in holder.
  • The cylinder assembly is duly machined & honed.
  • The ram is duly machined, grind & hard chrome plated.
  • The cutting blade made out of  tool steel duly heat treated & ground finished.
  • Capacity up to 40mm diameter.
Note:- It  is  also  provided  with  separate  pumping  unit  (remote control type).   design, type, specifications are provided at the time of enquiry.


Hydraulic Compressor (Hand Operated)

These Machines  are  Portable,   Easy to  Carry,  Suitable  to  Joint AAC / AAAC / ACSR Conductor & Earth Wire. These machines mono block made out of solid EN 8  steel. The  cylinder assembly is finished after the accurate boring, machining, honing & hard chrome plating  procedure.  The ram made out of high carbon alloy steel, duly accurate machined, grinded  & hard chrome plated.

Capacity 100 ton 150ton
Ram Diameter 117mm. 140mm
Travel Of Ram 35mm to 40mm 35mm to 40mm.
Ram Retraction Through High Tension Spring Through high tension spring
Outer Diameter Of Cylinder 205 +/- 5mm. 225 +/- 5mm.

Details Of Pumping Unit Hand Operated, with two stages pumps.
No. Of Plungers Two, One for high lift & low pressure, and second for low lift & high pressure.
Type Of Material Used For Plungers High carbon alloy steel
Diameter Of Plunger 20mm for low pressure,11mm for high pressure
Working Pressure 960 bars.
Piston Affected Area 107cm2 for 100 ton & 154cm2 for 150 ton
Valve Provided With Unit Spring loaded safety valve to adjust the pressure release pumping valve to develop & release the pressure, suction valve, delivery valve & non return valve.
Oil Tank Capacity Of Pumping Unit 2 liter.
Oil Used By The Purchaser Hydraulic oil, enclo 68.
Pressure Gauge 100mm.
Rubber Seals The machines have only one rubber seal with canvas reinforced contents in the ram. All other seals/ packing / gaskets have totally been eliminated for trouble free life.

Compression  Dies are available  for  any type AAC / AAAC / ACSR Conductor & Earth wire.  The  compression  dies  are properly machined, hardened & After that the  dies  are  duly  tempered  to release their internal stress for preventing the dies from breakage.  The  hardness  is   checked   on  45  to  50  Rockwell.  Our   all  the  dies are ground finished & anticorrosive treated for preventing from rust.      

 Note:- Design, type, specification are provided at the time of enquiry.





Hydraulic Compressor (Hand Operated)
Large View
Hydraulic Crimping Machine
Large View

Hydraulic Crimping Machine

Hydraulic Crimping Machine

These machines are suitable to crimp Aluminum/ Copper  Cable, Conductor, Lugs & Ferrules of Size 16sq.mm to 1000sq.mm

The crimping tools are available in three sizes i.e. 400sq.mm, 630sq.mm and 1000sq.mm. Maximum pressure develop on dies are 10000psi.

The crimping tools are light weighted and supplied with hand or foot operated pumping unit, 2 meter long steel braided hose pipe & dies.

The crimping dies made out of alloy steel duly heat treated and ground finished. 

NOTE:- Design, type, specification are provided at the time of enquiry.


Overhead Transmission Line Stringing Tools

With over a decade of experience in the field of manufacturing and supplier in india of Hydraulic & Scientific Equipments, Overhead Transmission line Stringing Tools Hydraulic Force Enterprises has come up to be known as a reputed business entity. We are a leading manufacturer & Exporter of Overhead Transmission line Stringing Tools in india Hydraulic force Enterprises is marching forward to become the global leader in transmission line stringing tools & equipment. The company has been manufacturing and exporting these equipments Overhead Transmission line Stringing Tools, pulley, clamps, jacks, auto clamp, stub setting jacks, transmission line stringing tools line, running out block, reel elevators, bolted type clamps, sagging winch m/c, turn buckles, ladders, socks, transmission line, Stringing Tools equipments, stringing tools.


Overhead Transmission Line Stringing Tools
Large View
Single Sheave Pulley Open Type
Large View

Single Sheave Pulley Open Type

From our large assortment of products, we offer premium quality Sheave pulley, which is highly esteemed among our clients for their high performance, longer service life and user friendly features. These are fabricated using premium grade factor input and the latest technology in order to meet the international quality standards. Further, we offer these to our clients in various specifications as per their requirements at industry leading prices.


Four Sheave Pulley

We are one of the leading manufacturers, exporters and suppliers of Four Sheave Pulley. Our product range is considered as perfect equipment for structural, mechanical and general engineering purposes. These products are valued for their reliable performance, sturdy construction and longer service lives. Clients can avail these products at affordable prices.



Four Sheave Pulley
Large View
Double Sheave Pulley
Large View

Double Sheave Pulley

The accurate dimensions of Single Sheave Pulley are appropriate for performing linear and rotational system of motion. This is being used for various industrial purposes because of its advantages like long term operations, precision engineering and strong construction. There is soaring demand for our Single Sheave Pulley in Industries like construction, automobiles and shipping. The direction of an applied force and transmit rotational motion is easily changed by this product.


Discharge Rod

We are successfully ranked amongst the top manufacturers, exporters and suppliers of Discharge Rod. Our product range is manufactured from high grade raw material and is widely used in both domestic as well as international markets. These products are valued for their high quality standards and longer service lives.



Discharge Rod
Large View
Transmission Line Tools
Large View

Transmission Line Tools

Transmission Line Tools
Come along  clamp  (bolted  type)  7  bolt, come  along clamp (bolted type) 4 bolt, automatic  clamp,  patta  clamp  for  earth  wire, single sheave pulley (close type), single  sheave  pulley  (open type), double sheave pulley,  four sheave pulley 5 ton,four  sheave pulley 10 ton,  equalizer pulley,  roller 300mm (rubberized),  double arial  roller,  (rubberized),   turn  buckle,  5  ton,   turn  buckle,  10 ton,  ground roller.


Aerial Roller

Aerial Rollers made out of aluminum casted pulley and used for transmission line.


Aerial Roller
Large View

Contact Us

Hydraulic Force Enterprises
Mr. Rohit Kumar Pathak (Manager)
No. 101, Pocket G-21, Sector-7, Rohini
Delhi - 110085, India

Contact via E-mail
Home | Profile | Our Products | Site Navigation | Contact Us
Member IndiaMART.com © Hydraulic Force Enterprises. All Rights Reserved (Terms of Use)
Developed and Managed by IndiaMART InterMESH Limited