We offer qualitative Stainless Steel Hoses at reasonable prices that are acceptable for many applications in various industries. It is ensured that the product is regularly tested and of excellent quality. We determine its flexibility through its annular construction and formation. Our stainless steel hoses are manufactured with highly flexible close-pitch hoses that maintain its flexibility.

Our Petroleum Oil Field Hoses are best known for its intrinsic qualities. Their usage is best found in the petroleum industry and in oil fields for transferring various liquids like water, diesel and chemicals that are supplied in a length of up to 60º. Our Petroleum Hose are in-built with several features such as :

• Durability.
  
• Resistance to wear and tear.
  
• High tensile strength.
  
• Strong construction.
  
• Can endure corrosive sea weather.

These light weight Oil Transfer Hoses specially designed for heavy duty in the petroleum industry. Made with two plies of synthetic fibre, an embedded wire helix and comes with an outer cover resistance to petroleum products.

Their usage involves transferring gasoline, diesel, furnace oil, kerosene and alcohol. We supply the product in size 1” to 4” in diameter, length of up to 60º maximum and a radius 4 times the working pressure. They exhibit superior quality accomplishing the growing requirements of our clients.

 We supply Sulphuric acid Hoses of excellent quality and durability for variety of applications. Minerva’s popular chemical transfer hose is appropriate for mild and dilute chemicals. They are rated superb for handling more than 50 chemicals in pressure and gravity flow. Its light weight is an important feature that strongly reinforce with synthetic yarn or fibre plies among other intrinsic features :

Inner Diameter		Ply or Braid	W.P.		Length (Mtrs)
Inch	MM		PSI	Kg/Cm²
½	12.7	1	150	10	15
5/8	16.0	1	150	10	15
¾	19.05	2	150	10	15
1	25.4	2	150	10	15
1 ¼	31.00	2	150	10	15
1 ½	38.00	3	150	10	15
1 ¾	45.00	3	150	10	15
2	50.8	4	150	10	15
2 ½	63.0	5	150	10	15

We offer the usage of sand blasting hose / shot blasting hose best used for the transmission of sand and other abrasive materials at high velocity. Available in different sizes, the extra thick tubes are made of tough natural rubber and are enclosed with multiple layers of synthetic yarn of fabric piles specially designed for high reinforcement. These hosepipes have a minimum safety factor of 5:1 with a resistant minoflex NR rubber that helps retain its life. The following are some essential features :

• Durable
  
• Abrasion resistance
  
• Resistant to weather
  
• Cloth marked finish cover
  
• Maximum wear resistance
  
• Long lasting

Type I. W. P. 100 PS I (Kg/Cm²)			Type II W.P. 150 PSI (10 Kg/Cm²)
Inner Diameter		Ply or Braid	Ply or Braid	Length (Mtrs)
Inch	MM
½	12.70	2	2	15
¾	19.05	2	2	15
1	25.40	2	2	15
1 ¼	31.75	3	4	15
1 ½	31.75	3	4	15
1 ¾	45.00	4	5	15
2	50.80	5	6	15
2 ½	63.00	6	7	15

We offer superior quality imported Concrete End Hose pipes appropriate for various purposes where the usage of pipes is involved. Our concrete hoses are 5” in diameter and available in the length of 4 and 6 meters with side fitting (‘o’ ring) flange. The following are some essential features of our product: :

• Durable
  
• Long lasting
  
• Applicable for construction purposes like buildings, bridges, roofs, etc.
  
• They displace concrete cement.
  
• Suitable for concrete pumps Putzmeister, Sany and Greaves amongst others.

We supply a range of cement feeder hoses that are produced with the usage of Sridhar rubber and synthetic fibre. They are able to withstand bulk handling and efficiently hold dry cement. Its usage is found for construction purposes, irrigation projects and building sites. An essential feature of Cement Feeder Hoses is abrasion resistant which is well-accepted by our clients.

Size		Ply or Braid	W.P.		B.P.
Inch	MM		PSI	Kg/Cm²	PSI	Kg/Cm²
4	100	2	150	10	600	42
5	125	4	150	10	600	42
6	152	6	150	10	600	42

We offer excellent quality Hose Fittings & Monoblock Bends best suited for high pressure application. It connects a hose to another fluid component and is used for crimping on rubber pipe as an end fitting or as a connector between the two outlets / inlets. We ensure that it is leak proof and for this reason it is mostly preferred by our clients.

Hose Adaptors are quite popularly known for its various usages in many areas. They come in different sizes, shapes and threads and are best known for its superior quality. Flexible hose adaptors connect a rubber or PVC hose to an ISO-QF flange and are available in Aluminium and 304 Stainless Steel. Its features include:

• Anti corrosive
  
• Durable
  
• Flexible
  
• Long Lasting

A comprehensive range of High Tensile Fasteners are offered to meet the various requirements of the industry. These fasteners are available in various size, specifications, designs and models so as to compete in the market and passably meet the requirements of our clients.

They are made from excellent raw materials and latest manufacturing facilities emphasizing on improving its quality and durability. Our range of products includes nuts, bolts, washers, threaded bars, studs, u bolts, j bolts, anchor rods and pins.

With the best production facilities, we have been able to supply SAE split half flange with all the essential qualities. It is tailored to engage the flanged head to a conduit for mounting to a bulkhead.

We as suppliers ensure quality checking and testing at regular intervals. Our products are corrosion resistant, flexible, durable and long lasting. They are available in two types of 4–bolt flanges:

• Captive flange
  
• Split flange

Our wide range of Spiral Mixers used for a range of applications is available in variable speed and attachments. These mixers are made of coasted and mild steel ball in stainless steel. They are generally preferred by our respective clients for its excellent quality and affordable price.