We are manufacturing internal gear pumps for our clients who deal in industries like, brewery and distillers, chemical and process, fisheries, soap and detergent, steel industries and others.

Features:

• Self-priming pumps.
• Provide steady deliveries without pulsation for clear liquids or with little pulsation.
• Performing their work without vibration and noise.
• Feature speed directionally proportional to capacity.
• Suitable to handle viscous clear liquids and temperature up to 250 degree C.
• Available in a wide choice of construction material to suit various corrosive media.
• Used to handle clear fluids like, furnace oil, mineral oil, edible oil, petroleum jelly, acids, alkalis, solvents and others use our internal gear pumps to function.

Specifications:

• Have the capacity from 10 LPH to 45,000 LPH.
• Capability to handle pressure up to 10 bar.
• In the viscosity level, they are as low as 1.0 cst to 300,000 cst.

Our range of rotary lobe pumps are manufactured to provide a good operation facility. The principle operations of our rotary lobe pumps are two synchronized rotors (lobes), which rotate against each other and build chambers towards the casing of the pump.

Specifications:

• Available with a capacity of 50 LPH to 50,000 LPH.
• Capability to handle pressure up to 10 BAR.
• In the viscosity level, they are as low as 1.0 cst to 300,000 cst.

Features:

• Designed to give high suction capability.
• Easy to maintain and do not disturb pipe assembly.
• These are reversible pumps and help in the transfer of abrasive particles in suspension. Pumps good in low pulsation.
• Make low noise & have a high precision metering discharge.

Application:

• Our rotary pumps have a rich application in food and cosmetic products industries, They are used in the manufacturing of products like:
  • Alcohol
  • Baby food
  • Yeast
  • Yogurt
  • Vaseline
  • Soap
  • Toothpaste
  • Sugar
  • Salad dressing
  • Wines
  • Biscuit cream

We are also manufacturing a wide range of pumps in KC series close coupled compact pumps. These pumps are designed as compact configuration of screw pumps in which the pumping parts are coupled directly to the drive thereby eliminating the bearing housing.

These pumps are suitable for the restricted spaces of operation or mobile pump sets. Further they are also well designed which ensures low maintenance and cost effective working.

We are also offering various material of construction to suit varied applications in CI, CS, SS304, SS316 and others. On the other hand, stators will be from the applications of natural, nitrile, epdm, neoprene, hypalon, viton, silicon, butyl, hi-nitrile, buna poly butadiene and others.

Technical Parameters:

• These pumps are available with a capacity of 250 Cu.M/Hr.
• Having the head size of 12 Kg/sq.cm, these pumps are best pumps to suit all the industries.
• These pumps are well designed to suit the temperature effect up to 200-degree C.
• These pumps are also designed to have the viscosity up to 5,00,000 CST.
• Another technical feature of these pumps is that they have the solids handling capacity up to 30 mm.

We offer clients (K / KX /KY) - F Series quick clean hygiene screw pumps. These pumps are designed to give hygienic features with all metal parts in contact with liquid in smooth SS and stator of non-contamination rubber, seamless body eliminating product-retaining pockets. These pumps are designed to have the shaft sealing so that the food industries have the food grade gland packing/ mechanical seal. They have IDF / SMS /TRICLOVER / equivalent end connections.

Features:

• These pumps have a smooth finish stainless steel body, which have a contact with fluid.
• They have also stator, which is of non-contaminating polymer, in a way to give resistant to oils and fat.
• These pumps are designed in a way that all internal contours cab be swept by the product flow or by a detergent when “in line” cleaning.
• Designed to have elimination of product retaining pockets, which helps in the avoiding chemical or bacteriological contamination.
• Designed to work against high vacuum.
• Ideal to lift viscous fluids from the vacuum pan.
• Pumps ensure gentle handling of shear sensitive fluids without damage.
• Our pumps are also well in pulsation, turbulence and aeration-free, which metered flow in proportion to speed as very good.

Technical Parameters:

• Have the capacity of 550 Cu.M/Hr.
• Their head parameters have 48 Kg/sq.cm.
• They carry the temperature up to 200 degree C.
• Pumps designed to have the viscosity up to 5,00,000 CST
• Are capable of handling the fluids such as, apple pulp, beer cream, edible gelatine, latex, sugar syrup, wine and others fluids.

Industry Usage:

• Our pumps find a good place in the industries like:
  • Beverages
  • Cosmetics
  • Dairy
  • Distillery
  • Food Processing
  • Fruit Processing
  • Icecream
  • Malt and Cocoa
  • Pharmaceuticals

We offer a wide range in the section of progressive cavity helical rotor eccentric screw pumps. These pumps are also known as Eccentric Screw pumps or Helical Rotor Pumps, which have a unique pumping principle. These pumps have a high precision metallic single helical rotor, which rotates inside a double helical resilient stator, which form a uniform seal line and cavity.

Some of the products offered under this include:

KDA Series

• Features:
  • Our KDA series of pumps are made up of cast iron pump housing and bearing housing. Their rotors are of hard chrome plated alloy steel/tool steel, SS304, SS 316.
  • The rotating part of these pumps is of alloy steel or stainless steel.
  • Have designed the universal joints as single or double knuckle joints.
  • Rubber stator is made up of natural or synthetic rubbers like nitrile, epdm, hyplon, silicon, neoprene, viton, butyle or hi -nitrile based on application.
• Technical Parameters:
  • Have a maximum capacity of 350 Cu M/hr and maximum pressure of 48 Kg/cm2.
  • Can operate on the temperature up to 200-degree C.
  • These pumps are of 50,00,000 CST viscosity with a maximum solid size of 50 mm.

KHA Series

• Features:
  • Our KHA series of pumps are made up of SS 304, SS 316 or special alloys like alloy 20, hastalloy.
  • Have rubber stators which are made up of Natural or Synthetic rubbers like Nitrile, EPDM, Hyplon, Silicon, Neoprene, Viton, Butyle and Hi -Nitrile which are based on end application.
• Technical Parameters:
  
  • Have maximum capacity of 250 Cu M/hr and maximum pressure of 48 Kg/cm2.
  • Can operate on the temperature up to 200-degree C.
  • These pumps are of 50,00,000 CST viscosity with a maximum solid size of 50 mm.

Our Pumps are made up of cast iron construction with various metallurgy of rotating parts. These pumps use cast iron and stainless steel for wettable housing components. The rotor of these pumps have alloy steel, tool steel, stainless steel, alloy 20, hastelloy c, hastelloy b with hard chrome plating as the material of construction. These pumps also enjoy the rotating parts of alloy steel and stainless steel. The stator contains the materials of natural nitrile, neoprene, epdm, hypalon, butyl, silicone, viton and others. These pumps have also the seals, which are done by soft gland packing or in some cases they enjoy the mechanical seal.

Features:

• Pumps have torsion free metal bonded stator and double sealed universal joints as pin & bush joints or special designs like gear joints or cardon joints as per clients requirements.
• Designed to give longer service life and satisfactory efficiency which results in a tension and trouble free performance of the pumps.
• Have non-clogging feature, which enables it to contain high percentage of solids.
• Can also work on snore with inherently self-priming.
• In the case of versatility, these pumps handle abrasive, shear sensitive and viscous materials, solids in suspension and air-solid-liquid mixture, which help them to work efficiently.
• The suction and delivery ends can be interchanged by merely changing direction of rotation of the prime mover.
• Have high suction lift and also have the advantage of minimal internal wear because of low internal velocity.
• Our pumps efficiently handle fluids like, acidic and alkaline slurry, black liquor, detergent slurry, paint, paper pulp, petroleum jelly, latex, lube oil, soap stock, water to thickened sludge, yeast and others fluids.

Our range of pump products also has a series of KX-PK series industrial and chemical screw pumps. These pumps are designed with special geometrics , which varies from the 1/2 as well as 2/3 profiles. We are manufacturing these pumps with cast iron and SS 316 material of construction. We also offer special material of construction in the manufacturing process for highly corrosive fluids.
Features:

• The effective use of modern technology ensure shaft sealing by soft packed gland/ mechanical seal.
• In the direction of giving our pumps a long service life and high efficiency, we use torsion free metal bonded stator and double sealed universal joints.

Technical Parameters:

• Have the capacity of 300 Cu. M/Hr.
• These pumps head are of the measure of 24 Kg/sq.cm, for providing better results.
• Well designed to sustain the temperature up to 200-degree C.
• Designed to have the viscosity up to 5,00,000 CST.
• Have solids handling capacity up to 40 mm.

The Working Principle of Hydro Prokav Dual Flow Twin Screw Pumps is dependent on the rotation of the two screw spindles in the closed compartment. There is always a predefined Fine clearance exists between the outside diameters of the screw spindles and the Casing bore/ Liner in which the screw spindles are located. Each half of the screw spindles is left handed and right handed. Thus when the Spindles rotates, driven by the timing Helical Gears located at the end of the Screw. The Liquid is drawn towards the end of the Screw and entrapped between the Bore of the Pumping compartment as well as the flanks of the screws and is then propelled axially from both the ends towards the centre. Such a dual flow nullifies the axial thrust completely thereby enabling the screws to remain in a state of hydraulic balance resulting in High Volumetric Efficiency and Overall Efficiency.

User Industries:

• Petro chemicals
• Refineries
• On shore and off shore exploration
• Oil storage depots
• Bunkering stations
• Power plants
• Marine
• Shipping
• Sugar industries
• Steel industries
• Paper industries
• Textile indusries

Technical Parameters:

• Capacity: 1500 Cu.M/Hr
• Head: 50 Kg/sq.cm
• Temperature: Up to 300 Deg C
• Viscosity: Up to 500,00,000 CST

Hydro Prokav offers wide variety of high performance Triple-Screw Pumps which are highly efficient in handling a wide range of liquids with varying viscosity at high pressures, for use in a variety of industrial and marine applications. The pumps are manufactured using premium quality materials matched to service requirements.

User Industries:

• Cement industry
• Power stations
• Petro chemical refineries
• Oil depots
• Ship building industry
• Rayon, staple fibres
• Steel industries
• Fertilizer industries
• Paper mills
• Food processing industries
• Breweries

Technical Specifications:

• Viscosity: 0.8 cst to 1,00,000 cst
• Temperature: - 30 Deg C – 130 Deg C
• Capacity: 5 Litres per Minute to 10,000 Litres per Minute
• Pressure: 70 Bar (Maximum)