Our range of hydraulic rubber moulding presses has the capacity for Upto 500 tons and is used for a number of Rubber Moulding applications.

This hydraulic power pack unit is used in machine tools industry, marine applications, steel plants, cement plants etc.

Our range of hydraulic cylinders is offered in the Capacity of Upto 1000 Tons & 3.5 Meter Stroke.

This hydraulic jacking system device includes a base, dual pump, assembly mounted. Used for quick raising the jack up to a load to be lifted.

The use of hydraulic wire rope splicing machines has grown immensely in popularity over the past several decades. It has replaced conventional fiber rope and chains in many applications. With the rise in wire rope usage, the demand for wire rope splicing also grew as industries adopted technologies which utilized wire rope in the manufacturing process. Within the food processing industry, spliced wire rope loops are used on conveyor systems to pull product through the production process. There are a variety of splicing methods to fit every application in the wire rope market.

Our specialty is the Long splice. The Long splice is used to create a continuous or endless loop of wire rope frequently utilized on conveyor systems. The actual splice is a difficult multi-step labor intensive process in which two wire rope ends are joined end to end and the strands are intertwined to merge the two individual ropes ends.

Our hydraulic scissor lift tables, having standard 0.5 ton, 0.75 ton and 1 ton capacity with raised height of lift upto 1.6 meter. These units are ideal for die loading and unloading, lifting and lowering operations on machine bed and are useful as pallet levellers. Lifting movement is achieved by manual double acting hydraulic hand pump.

General Features

Cast Iron wheels

Plane / Cheq. top sheets

Raised height : 1 meter to 1.6 meters

Other models available in this range are :-

Power Single Scissor Lift.

Power Double Scissor Lift.

The lifting is achieved by AC electrically operated power pack units.
The raised heights can go upto 4.8 meters.

The range of hydraulic scrap bailing presses that we offer can be used for bailing scrap. Capacity of these products available, for upto 600 Tons.

Our range of hydraulic deep drawing press are used for S. S. Kitchen Sinks, Bath Tubs, Wheel Barrows, L.P.G Cylinders Halves, Geyser, Kitchen Utensils, Automotive parts, Surgical Instruments, Bomb Shell, Aeroplane Parts etc.

Range of Presses:

Single Action drawing press with bottom cushioning arrangement available in both pillars & frame design.

Double Action deep drawing press with blank holders available in both frame & 4 - pillars design

Counter drawing or reverse drawing presses

Injection movement is actuated by two hydraulic cylinders for perfect alignment to clamp unit.

Features:

Low initial cost

Low tooling cost

Easy & Quick setting

Enormous verstality

Accurate repetition & bending

User friendly

Easy maintenance

Standard spares, hence easy availability

Salient Features:

• The stable robust, all welded steel frame from ultra sonically tested plates are of top quality. Raw & table designed with special inclined member & box type struture for maximum strength.



• The top beam is guided by three point roller with replaceable hardened liners for least wear. This eliminates lubrication of steel to provide better quality of cutting for alonger time.



• Rake angle can be varied to permit shearing of higher thickness than nominal capacity & facilitating distortion free shearing of thin sheets.



• The fastest & eagiest way of blade clearance setting without need of feeler gauge, which helps burr-free edges.



• Front gauging by dis appearing stoppers mounted on left squaring arm. Robust, heavy & accurate back gauging to set cutting width.



• Hydraulic components are of international quality standards & assembled on specially designed compact mambold block for easy maintance.

Standard Accessories:

Main Drive Motor

Electric Control Panel

Operational Console

Pre selector switch to adjust rake angle

Lever operated blade clearance with calibration

Fine stroke adjustment rod with limit switch

Front sheet support

Squaring arm on right end with steel rule

Hardened transfer bar mounted on table

Hold down cylinders

Shadow light indicator

Four edge HCHCR / HCSR blade Interchangeable & suitable to shear mild and St. Steel

Manual back gauge

Optional Accessories:

Motorised back gauge with DRO

NC back gauge with ball screw

Second squaring arm on left side

Front support with roller according to required length

Rear sheet support

Ball transfer table

Degree protector for angular cutting

Stroke counter

Design with throat depth

First fill of hydraulic oil

Our range of hydraulic upstroke moulding presses are used for moulding rubber products and plastic components.

Hydraulic miniature power pack have the capacity of Minimum 4 cc at Pressure of 250 bars. Miniature Power Pack can be applied for space saving and is maintainence free.