Interarch Building Products Private Limited

Even sturts are C profiles or double Z profiles,normally 200 to 250mm deep out 2 to 3.15mm thick steel.

These are rated as non-combustible as defined in BS 476 Part-4, 1970 have excellent moisture resistance and can be used in areas of high humidity including covered external areas, kitchens and bathrooms. They have been tested in an atmosphere of 95% RH. Apart from this, they do not support the growth of bacteria and other micro-organisms, and under normal conditions can be expected to last the lifetime of the building. Designed for installation on a standard 600mm X 600mm module snap in suspension grid.

INTERARCH buildings are optimized to meet specific requirements of each client. Framing systems asymmetrical about the ridge line, multispan systems with possible, but require special study. Commonly used primary framing systems are shown below. All frames shown are symmetrical about the ridge line. Framing systems asymmetrical about the ridge line, multispan systems with unequal width modules, and frames outside the ranges shown are possible, but require special study.

roof purlins are cold-formed z profiles,normally 200 to 250 mm deep out of 1. 6 to 3. 15 mm thick steel. These are fixed to the top flanges of the rafters by means of clips bolted to the rafters and purlin web bolted to the clips. Purlin ends are over-lapped to act as continuous beams.

The patented fluted side lap makes TRACDEK Hi_Rib completely watertight. The side lap is totally weatherproof. Any moisture drawn in by capillary action is trapped and dispersed by normal run-off. Long lengths and weatherproof side lap allow TRACDEK Hi-Rib to be used safely on roof pitches as low at 3 deg.(approx.1 in 20) in single lengths,5 deg(approx.1 in 11) with end laps,and for vertical cladding. TRACDEK Hi-Rib is also available in crimp curved sections.

On-site roll forming is available to eliminate end lap conditions and to facilitate installation of single length panels from ridge to eaves for large roofs. A versatile profile suitable for roofing application and on roof slopes as low as 1 in 20 This system features optional factory installed hot-melt mastic for low slope application to ensure weather tight seams.

TRACDEK SS-2000 is a field seamed system that combines a slimp rib with exceptional uplift resistance. This panel has been designed to withstand the most rigorous conditions. On-site roll forming is available to eliminate end-lap conditions and to facilitate installation of single length panels from ridge to eaves for large roofs. A versatile profile suitable for roofing application and on roof slopes as low as 1 in 50. This is a field seamed system that combines a slim rib with exceptional uplift resistance. It is designed to withstand the most rigorous conditions. This system features optional factory installed hot-melt mastic for low slope application to ensure to ensure weather tight seams.

Wall girts are cold formed Z sections, normally 200 to 250 mm deep out of 1.6 to 3.15 mm thick steel. These are fixed to the outer flange of the side wall columns

Tracdek Hi-Rib panels can be used as internal liners for double skin roof and wall construction with or without insulation. It can be used for roof slopes as low as 1 in 10.

tracdek klippon is a concealed fixed snap-on seam roof/wall covering system consists of structurally strong high ribbed panels with wide fluted pans for efficient water shedding and are fixed by means of concealed clips.

Interarch offers worl class state of the art engineered roof and wall claddings profiles for pre-engineered Buildings to suit custom requirements.

Sound transmission loss is a measurement of sound insulation between one room and another. The overall sound transmission loss of such a composite ceiling will be 10-20 dB lower than the transmission loss of the ceiling panel or tile alone. The suspended ceiling should not be relied upon to give sound insulation between adjacent spaces. TRAC Acoustic-Panel ceilings overcome these problems. This ceiling range comprises perforated panels with an acoustic nonwoven factory applied to the rear of the panels.

TRAC Tile and Plank design ceiling system has been developed to meet both practical and aesthetical requirements of modern ceilings. The tile/plank ceiling systems are offered in stove enameled coil coated steel and aluminium and powder coated steel and aluminium finishes and offer the advantage of easy cleaning, non-static properties and inert material.

TILE CEILING

600X600 mm, 300X300 mm tiles with Clip-in Lay-in suspension Tile are manufactured out of coil coated galvanized steel/aluminium alloy AA 3005 / 3105 on advance equipment, which includes several leveling stages in the manufacturing process.

PANK CEILING

From 300mm to 600mm width, 1000 mm to 3000 mm length with Clip-in, Lay-in and C-Grid suspension Plank are manufactured out of coil aluminium alloy AA 3105 / galvanized steel produced on advanced equipment which includes several leveling stages.

Decorative slides and finials

Control units with Delrin wheels for smooth operation

Powder coated installation brackets

The entire roller blinds range now features a strong aluminum roller tube and a superb quality sidewinder control mechanism.The most important part of any roller blind is the fabric; this is the most visible part of the blind. you will have your own ideas on designs and colours.

the gossamer collection

the trac fineblind that thinks it's a net curtain. The slats are perforated with thousands of tiny pinholes, giving it light and delicate look, while still retaining all the strength and features of the trac fineblind

turning the colour on and off

everything about the trac fineblind is designed with an eye for decorative details. The slats are ultra slim, hereby half as wide as slats used to be. And there's a superior opening mechanism.
instead of a traditional command system there's a slender elegant wand. Just twist wand to open or close your blind

trac decormatch

a unique colour game you play, using different colours from the trac fineblind colour range. Put them together in combinations and you have an elegant striped blind, where the colours harmonies and contrast at the same time.

Your own sense will be very accurate. If it feels and looks like top quality, chances are that it is. When it comes to non-fabric window coverings such as blinds, shadings, shutters, and verticals, branding is much more important. You may not feel or see differences that are critical for durability and good service. Look to brand name manufacturers for these products.
Window treatments by a professionally trained window treatment installer. Fabrics range from light-filtering to room-darkening for ultimate light control. 100 % polyester fabric is wrinkle-resistant and washable for easy care.