Rosin Activated Flux is a liquid solution with approximately 15% solids containing water white rosin blended solvent system with activators. The chlorides are approximately 0.1%. The sufactants incorporated into the flux yield relatively tackfree residues.

Rosin Free Flux is a halogen-free, rosin-resin free, with lower solids percentage solvent system designed for similar application as Flux -707. However, it has less foaming action that Flux-707.

It is a water soluble organic activated flux. Water Soluble Flux is especially adaptable for foam fluxing, however, it can also be applied by dipping or brushing. It is used where inorganic fluxes are too corrosive to use and rosin fluxes are too inactive for the  application. It is essential that the flux residues be completely and adequately removed.

No Clean Flux is a halogen-free, modified rosin, low solids solvent designed for wave soldering conventional and surface mount circut board assembilies.

It is a high activity, organic based chloride free aluminium soldering flux that can be used soldering aluminium to copper/ brass and aluminium to plated terminals and it also performs well in hot dip coating of aluminium cable connectors. The Flux has a specific gravity of 1.14.

Radiator Flux is a low-foaming, zinc free acidic solution to primarily clean the brass and copper surface by removing organic contaminants and oxides. It can be used in assembling operations like core-banking, tube-header (end dipping), tube-milling and other soildering process for automotive radiators and heater cores. The flux has a specific gravity of 1.22.

(Item Code : FLUX - OP64)

Stainless Steel Flux is a slovent based, acidic solution used prior to soldering the stainless steel surface. It is primarily used to clean the stainless steel surface by removing organic contaminants and oxides. It has a specific gravity of 1.55.

(Item Code: FLUX - 119M)

It is acidic solution to primarily clean the stainless steel,brass and copper surfaces by removing organic contaminants and oxides.

It is a blend of water white rosin with surfactants similar to Flux paste S-18-A. However its midily activated per MIL-14256D

Solder flux paste is a zinc free blend of polyols, surfactants and activators. It is especially used for assembling by soldering and brazing and copper and brass parts used in plumbing applications. The Flux-paste and its residues are completely water soluble.

High purity of tin and lead uniformly alloyed in 63/37 or 60/40 proportion for optimum performance & process consistency.

Soldering Wire or Flux-cored wire made with high purity tin and lead alloyed in various required proportions.

It is a rosin based coating developed to preserve the solderability of printed circuit boards by protecting clean metallic surfaces from atmospheric oxidation and other contamination. It can be applied by spraying, dipping or brushing to a circuit board which has been cleaned and water rinsed.