|
 
|
Filament Wound Tubes
One of our most popular FRP Products, Filament Wound Tubes and Filmaent Winding Tubes are manufactured by using quality raw materials. These tubes are offered in the diameter of less than equal to 1500 mm and length less than equal to 3000 mm.
|
 |
Filament Wound Tubes |
 |
|
 | One of our most popular FRP products, filament wound tubes are manufactured by using quality raw materials. These tubes are offered in the diameter of less than equal to 1500 mm and length less than equal to 3000 mm. These tubes are available in following specifications: Physical Properties: | Property | Specification | Value | Unit | | Sp Gravity | IS 10192-1982 | 1.90 to 2.10 | | | Glass Content | DIN EN 60 | 55-75 | % | | Water Absorption | IS 10192-1982 | < 0.5 | % | | Flatness (1000mm) | IS 10192-1982 | 6 | mm | Mechanical Properties: | Tensile Strength | ASTM D 638 | 4500 - 7000 | kN/mm2 | | Flexural Strength | IS 1998/6-1962 | 4500 - 7000 | kN/mm2 | | Compressive Strength (Axial) | IS 1998/8-1962 | 200 - 450 | kN/mm2 | | Barcol Hardness | ASTM D 2583-75 | >40 | | | Heat Distortion Temperature | ASTM D648 | 130 - 155 | deg C | Electrical Properties: | Dielectric Strength - Axial | IS 10192/13-1982 | 50 | kV/25mm | | Dielectric Strength ACE="Verdana, sans-serif">Dielectric Strength – Radial | IS 10192/14-1982 | 10 | kV/mm | | Arc Resistance | ASTM D495 | 120 | Sec | | CTI (Tracking Resistance) | DIN53480 | 600 | V | | Power Factor (at 90C in Air) | ASTM D 150 | 0.03 | | |
|
|
 |
Ask for Quote |  |
|
|
Showcase
