We manufacture and offer biocide in different models like

IBC - 101

We manufacture biocide that is a bactericide for control of mixed bacteria in both aerobic and anaerobic (including sulphate reducers) in fresh water, sea water and low brines. It is a quaternary ammonium compound based bactericide. The surfactant included increases the effectiveness for a broad sustained action with good penetrating qualities. It can be used in batch or continuous treatment. The most economical methods of treatment is batching for three to six hours once or twice a week at 50-200 PMM depending on the severity of the problem.

IBC-102
It is a highly effective biocide for control of both aerobic and anaerobic bacteria in fresh water, sea water and low brines. This Biocide is found to be particularly effective in the on shore/off shore application. The synergistic action insures rapid and complete bacterial kill with decreased likelihood that the bacteria develop a tolerance for the chemical. It has an excellent / performance ratio, and may be used either in batch of by continuous injection.

IBC-103

It is a highly effective microbiocide for control of both anaerobic and aerobic bacteria in fresh water, sea water, or brines. It is a highly effective potent blend of aldehyde bases found to be particularly effective in the on shore/off shore application. The synergistic action insures rapid and complete bacterial kill. The ingredients in it are biodegradable, making the product useable in systems where treated water is to be discharged into the sea. It is compatible with most scale inhibitors. It has an excellent / performance ratio, and may be used either in batch or by continuous injection. Batch treatments of 50 – 200 PPM it is injected for 3 – 6 hours, as needed or as regular maintenance treatments.

We manufacture corrosion inhibitors that are available in different models like:

CI-121
It is a water-soluble film forming organic corrosion inhibitor. CI-121 has very low toxicity and is biodegradable. CI-121 is designed to control internal corrosion caused by dissolved oxygen in oil & gas production systems, water injection systems and pipelines.

It is a specially designed corrosion inhibitor. CI-121 effectively controls corrosion by dissolved oxygen. It can be used to treat water cut well flow lines, process equipment and oil pipelines. CI-121 is particularly suitable for pipelines application where it will partition predominantly into the water phase ensuring effective treatment of water setting out at low spots. It should be applied by continuous injection. For water injection systems, typically dosage level will be 10-50 PPM.

It can be stored in closed containers away from direct sunlight at ambient temperature. During handling, direct contact with human body is to be avoided. Safety goggles and gloves are recommended for safe handling. The spillage can be washed with copious amount of water. On Ingestion/Eye contact with the product, medical attention should be sought immediately.

PHYSICAL DATA Appearance Clear Liquid

• Specific Gravity 1.01 ± 0.02 at 25°C
• Viscosity < 60 CPS at 25°C
• pH Range 6.5 - 8.0
• Pour Point: < 5°C
• Flash Point > 1000 C
• Boiling Point > 1000 C
• Freezing Point <-100 C
• Solubility Soluble in Water in all proportions & Insoluble in Aromatic Hydrocarbon Solvents.
• Availability 50/200 Kg Net in New HDPE Carboys/Barrels.

IDE - OS 111

It is Water in Oil Demulsifier, intended to effectively separate formation water from emulsion in crude oil. It is a perfect blending of Ethoxylated Block Co-Polymer, Ethoxylated Resin and Alcohol in Aromatic Solvent. It should be used neat as supplied and a positive displacement pump is advised for accurate metering. Further upstream the unit, the better mixing with the emulsion of the demulsifier is achieved. The specifications include:

• Appearance Brown Colour Homogenous Liquid.
• Specific Gravity 0.92 ±0.02 at 25°C
• Viscosity < 30 CPS at 25°C
• pH Range 5.0 - 8.0
• Pour Point < 0°C
• Solubility Soluble in Aromatic Solvents, Toluene, Iso Propyl Alcohol, and Kerosene & Crude Oil. Insoluble in Water.

IDE - WS 112

It is a Oil in Water Demulsifier, intended to effectively separate oil from treated water. It is perfect blending of Ethoxylated Block Co-Polymer and Alcohol dissolved in water. It should be used as 2% - 5%solution in water as supplied and a positive displacement pump is advised for accurate metering. Further upstream the unit, the better mixing with the emulsion of the demulsifier is achieved. The physical data includes:

• Appearance Dark Brown Homogenous Liquid
• Specific Gravity 1.00 ± 0.02 at 25°C
• Viscosity < 80 CPS at 25°C
• pH Range 5.0 - 8.0
• Pour Point < 5 °C
• Solubility Soluble in water, Iso Proply Alcohol & Methanol. Insoluble in hydrocarbon solvents.

DF-191

It can be used effectively in most water based fluids & all brine types. It is used to eliminate foam from water drilling fluids & brines. Originally designed for brine foam prevention. It can be used to remove foam in brines, drilling & drill-in fluids. DF-191 can be stored in closed containers away from direct sunlight at ambient temperature. During handling, direct contact with human body is to be avoided. Safety goggles and gloves are recommended for safe handling. The physical data includes:
• Appearance Clear Liquid
• Specific Gravity 1.00 ± 0.10 at 25°C
• Color Pale yellow
• Flash Point > 100 0 C
• Boiling Point > 100 0 C
• Freezing Point < -10 0 C
• pH Range 6.0 – 7.0
• Solubility Dispersible in water.
• Availability 50 / 200 Kg. Net in New HDPE Carboys / Barrels.

DE 161 is a liquid organic cationic polymer used to remove oil and suspended solids from water. It can be used alone or together with coagulants and flocculants such as iron salts, etc. It is a cationic polyacrylamide based compound. DE 161 is suitable for use in air flotation separation, gravity settling and direct filtration. When used in conjunction with standard flocculants, it produces an excellent flock in treatment range 5 – 20 PPM. Proper dosage rates have to be determined for each water.

DE 161 may be pre-diluted with water or injected as supplied. It can be stored in closed containers away from direct sunlight at ambient temperature. During handling, direct contact with human body is to be avoided. Use of safety goggles and gloves are recommended for safe handling. The spillage can be washed with copious amount of water. On ingestion / eye contact with the product, medical attention should be sought immediately. The physical data includes:

• Appearance Viscous clear liquid
• Specific Gravity 0.98 ± 0.05 at 25°C
• Color Pale yellow
• Viscosity < 100 CPS at 25°C
• pH Range 5.5 – 7.5
• Boiling Point > 100 0 C
• Flash Point > 100 0 C
• Freezing Point < -10 0 C
• Solubility Soluble in water in all proportions and insoluble in Aromatic Hydrocarbon Solvents.
• Availability 50 / 100 / 200 Kg. Net in New HDPE Carboys / Barrels.

OS - 151
It is an Oxygen Scavenger used to arrest oxygen in sea water. It is a prefect blending of an active bisulphite solution and inorganic chemicals. It is oil field chemical and as a reducing agent in caramel, photographic chemical. It can be stored in closed containers away from direct sunlight at ambient temperature. During handling, direct contact with human body is to be avoided. Safety goggles and gloves are recommended for safe handling. On ingestion/ eye contact with the product, medical attention should be sought immediately. The physical data includes:

• Oxygen Scavenger - (NH 4 ) HSO 3 - Oil Field Chemical
• Molecular Weight 99
• Molecular Formula (NH 4 ) HSO 3
• Physical appearance Clear, Yellow colored solution free from foreign particles
• Ammonium Bisulphite NH4HSO3 percentage by mass 65 % Min
• Specific Gravity 1.38 TO 1.410
• Availability 250 Kg. Net in New HDPE Barrels.