I. M. P. Powers Limited

To strive for total customer satisfaction by providing quality products & services on time and every time. By planning and team work we shall do continual improvement.

Quality Objectives

• Customer Satisfaction
• Continual improvement
• Team work

- Ramniwas R. Dhoot
  Chairman

Transformers of various ranges manufactured by the company have successfully passed rigorous short circuit & impulse tests at prestigious laboratories like CPRI-Bhopal (Central Power Research Institute) and ERDA-Baroda (Electrical Research & Development Association & STLA Rugby [UK])

IMP also manufactures ON LOAD TAP CHANGER (OLTC) a system improvement equipment which is an integral component of a Transformer and useful for changing the taps without interrupting the supply.

Computer Aided Design (CAD) programs are used to determine various critical parameters in Electrical Designs and to arrive at optimized design solution much faster. Advanced Computer Programs are used in Electro-Mechanical Analysis.

Impulse Voltage distribution and field analysis are used to determine Electrical stresses. The leakage flux can cause local over heating if not controlled. The complex problems which arise out of axial and radial leakage flux are controlled by selecting the width and thickness in optimized ratio. Alternatively use of continuous transposed conductors are recommended. Computerized plotting is done for preparation of General Arrangement as well as detailed manufacturing drawings.

Design
Widest range of analogue electrical indicating and measuring instruments to indicate and measure electrical properties.

Our R & D division is greatly appreciated by our customers as we are fully geared up to develop EHV Transformers rating up to 150MVA with in its present capacity of 3000 MVA PA and are looking forward for higher rating Transformers.

Systems Control

Apart from its quality products IMP is also found to and confirmed to the Quality System Standard and certified with ISO 9001 for its Design, Development, Manufacture, Repair & Supply of Transformers, On Load Tap Changers & other products.

Design, Quality and Reliability Factors

• We have got the best designs available. The designs are made on computer to give best possible designs at optimum costs. The drawings are also made on computer i.e. CAD Systems. More than 5000 designs are ready in our systems.
• We are an ISO-9001 Company and thus we strictly follow the quality procedures to give consistent quality ALWAYS. We are the first Transformer company to get this in India and the same is also renewed in year 2000 after surveillance audit.
• We are one of the Govt. Recognized Export House and in addition to this, we are NATIONAL EXPORT AWARD WINNER for the year 1994-95 for our Excellent Export Performance in addition to the two awards from EEPC on Regional & National level.
• This is only due to our established brand name IMP and product reliability in the market since last 41 years.

  Delivery

Team work and co-ordination within IMP is so professionalised that it offers the best delivery schedule to meet customer's requirements which is difficult for any other manufacturer to match considering the time taken for transformers being tailor made item. Our production capability is that we are in a position to give 1 No. 5MVA Transformer per day and 1 No 25 MVA per 3 days and therefore we can meet required deliveries at any time. Having 2 factories we have facility to re-schedule our planning to give priority to requirement. For example, if 25MVA transformer is required, the same can be delivered within 8 weeks from drawing approval.

Performance

IMP transformers are giving trouble-free-service to its valued customers as stated above and failure rate is almost negligible compared to its other competitors.

Wide Network

IMP has got very wide network of Dealers comprising of its Agents/Representatives all over the Country to assist clients and render all kinds of Commercial and Engineering Support while selecting Transformer application-wise and render after sales service.

We have two factories at Mumbai & Silvassa which are equipped to manufacture meters & transformers respectively. Our Silvassa Factory is a purpose designed modern transformer factory built on a "Green Field Site" for the manufacture of HV & EHV Power Transformers up to 330 kV Class 250 MVA. Both production sites have extensive Test facilities utilizing highest quality test equipment. Many of our Overseas Buyers & Consultants visited our factory and appreciated the facilities to be equal or superior to many European facilities.

We have total installed capacity of 10000 MVA Per Annum. Thus, we have adequate capacity to manufacture the transformers of your requirement. As a result of this, turnover of our Company is growing more than 50% in the last couple of years.

We also enjoy market share of about 11 % of Transformers manufactured in India in the medium rating Transformers.

Further we are manufacturing transformers from 10 KVA to 250 MVA 330kV Class which is a very wide range & meets all requirements of customers under one roof.

• MAHATRANSCO [M.S.E.T.C.L.] Maharashtra approved Vendor for 200 MVA, 220 kV Voltage Class EHV Transformer

• CENTRAL ELECTRICITY AUTHORITY [C.E.A.] Govt. of India approved Vendor for 220 kV Voltage Class EHV Transformer for various turnkey packages

• ISO - 9001 Company since 1997 and First Transformer manufacturing company to get this in India

• Capacity... 10000 MVA Per Annum

• In-house Design centre with advanced engineering and graphic software

• Transformer of 100 MVA 220 KV Type tested and various capacity Transformers TYPE TESTED up to 100 MVA- 220 KV & 71 MVA 330 KVA

• First company to get RDSO approval for 10 KVA Auxilliary transformer

• First company to get 5 MVA Short Circuit Tested in India

• Successfully conducted Short Circuit Test on 25 MVA 132 KV Class Transformer and among top few companies to have this credit in India

• 48 Years experience with wide satisfied customer base

• Wide range of Transformers from 10 KVA to 200 MVA under one brand name

• Winner of Engineering Export Promotion Council's Award

• Winner of National Export Award given by the President of India for Excellence in Export

• In-house OLTC which is an added advantage for prompt delivery and competitive price

• Manufacture of Transformers in last three decades & 48 years Old Company

• A Government Recognised Export House & various Export Award Winner

• Physical export up to 71 MVA 330 kv

• World Class Factory to manufacture transformers and our production of facilities have been approved by Overseas Consultants & Clients to be among best companies

• Entire design datas on CAD facility and in-house design team with more than thousands designs in our data

• Having on record of successfully conducting more than 100 Impulse tests & 50 short circuit tests on various rating transformers from 10KVA to 100MVA

• IMP has executed the prestigious contracts received from NTPC & PGCIL and WORLD BANK aided contracts successfully

• IMP has been supplying its transformers to various State Electricity Boards like MSEB, RRVPNL, APTRANSCO, GEB, MPEB, etc. and Leading Turnkey Contractors like L&T, CROMPTON GREAVES, JYOTI STRUCTURES,   SIEMENS, ABB, KEC, NAGARJUNA, TATA PROJECTS, and many more

• IMP has been supplying its distribution and power transformers to U.K., Africa, New Zealand, Zambia, Australia, Cameroon, Dubai, Kenya, Nigeria, etc. with continuing contracts for more than last 3 years from the above overseas clients

• IMP have supplied 71MVA 330KV Transformer to Cameroon for the project commissioned by AES, US and 30/40MVA 132/33KV Transformer to UK Client who HAS IMPULSE TESTED THE SAID TRANSFORMER AT STLA, RUGBY, UK SUCCESSFULLy

• In-house Impulse Laboratory : Latest Vapour Phase Drying autoclave for heating Power Transformer

• Shri. Ramniwas R. Dhoot      Chairman

• Shri. Ajay R. Dhoot      Manging Director

• Shri. Aditya R. Dhoot      Jt. Managing Director

• Shri. R T Raj Guroo      Independent Director

• Shri. Prashant J. Pandit      Independent Director

• Shri. Jayant N Godbole      Independent Director

• Shri. Krishan Kant Rathi      Independent Director

• Shri. J. P. Taparia      Director

• Shri Siby Antony      Director

  Highest Quality in all aspect of our business. Team work, respect for individual, continuous improvement, profitability & Growth