 |
|
Lathe Machines |
|
|
We offer a wide range of lathe machine includes heavy duty lathe machine, all geared lathe machine, all geared heavy duty lathe machine and lathe machine under counter that is manufactured from quality raw material. These lathe machines are widely demanded in engineering industry for their unique features like high durability, tensile strength, high efficiency, resistivity to adverse conditions and low maintenance cost. Our clients can avail these lathe machines at competitive prices.
|
All Geared Lathe Machines - Nagmati Model 175
|
|
We are the leading manufacturer, supplier and exporter of lathe machines, heavy duty lathe machines, medium duty lathe machines. Manufactured as per International standards, these machines offer longer service life and optimum functionality at the client’s site.
Features: - GRADE – 25 HARDENED AND GROUND BED GUIDEWAYS.
- HARDENED & GROUND ALLOY STEEL GEARS & SPINDLE IN HEAD STOCK
- HARDENED & GROUND TAIL STOCK RAM
- ALL CRITICAL COMPONENTS LIKE SHAFTS, GEARS, PINS, LEAD SCREW ARE MADE OUT OF EN-8/ EN-9 ALLOY STEEL
- ACCURACY CONFORMS TO INDIAN STANDARD No. I.S. : 1878 (PART - l) – 1993.
Salient Features: - IS.20/25 graded casting
- Rigid and box section type 240 mm wide bed provides maximum torsional stiffness.
- Rigid and accurate, alloy steel hardened and ground main spindle mounted on precision taper roller bearings & ball bearings.
- Forced lubrication in universal feed gear box. Apron with oil bath.
- Thread and feed mechanism interlocked (Only one can be engaged a time).
- Camlock spindle nose (DI-4 type)
- Overload Protection through suitable relays and contractors.
- Switch shaft lever fix at carriage to rev. forward & stopped main spindle.
Built-in Accuracy: - All major castings are artificially seasoned for retaining built-in accuracy.
- Critical components precision machined on imported mother machines.
- Induction hardened and alloy steel gears of head stock mounted on precision spined shaft and running in oil bath.
- Flame hardened and ground bed for sustained accuracy.
- Alloy steel lead screw threads produced on WMW thread milling machine.
- Each machine is tested to IS-1878 (Part) 1993.
Versatility: - Built-in gap bed.
- Universal feed gear box for easy selection of wide range of feeds and threads through levers. No change gears required.
- Instantaneous spindle reversal while threading.
- Wide variety of optional accessories for higher productivity.
Interchangeability: - All components are machined using jigs and fixtures on imported mother machines to close tolerances thus providing easy.
- interchangeability.
|
|
All Geared Lathe Machines - Nagmati Model 235/1 to 235/6
|
|
We are the leading manufacturer, supplier and exporter of lathe machines, heavy duty lathe machines, medium duty lathe machines. Manufactured as per International standards, these machines offer longer service life and optimum functionality at the client’s site.
Special Features: - Rigidity and heavy duty performance
- Robust IS 25 graded castings.
- Rigid and box section type extra wide bed provides maximum torsional stiffness.
- Rigid and accurate, alloy steel, hardened & ground man spindle mounted on precision taper roller bearings.
- Speeds range from 35 to 1500 RPM with 5 HP motor.
- Force lubrication in headstock.
- Apron with oil bath.
- Interlock for thread and feed mechanism (only one can be engaged at a time).
- Full length cross slide to accommodate rear tool post or copying attachment.
- Heavy square body tailstock with 60 mm sleeve.
- Sliding type coolant and chip tray.
- Electrical overload protection through relays and contactors.
Built-in accutacy : - All major casting artificially seasoned for retaining built-in accuracy.
- Critical components precision machined on imported mother machines.
- Induction hardened and ground and alloy steel gears mounted on precision spline shafts & running in oil bath.
- Flame hardened and ground bed for minimum wear.
- Alloy steel lead screw threads cut on WMW thread milling machine.
- Each machine tested to IS: 1978 (Part l) 1993.
Versatility: - Built-in gap bed.
- Extra height of centers for larger jobs (optional).
- Norton gear box for selection of wide range of feeds and threads.
- Instanteous spindle reversal while threading by swich shaft lever attached with carriage.
- Wide variety of optional accessories for higher productivity.
Interchangeability:All components machined using jigs & fixtures on imported mother machines to close tolerances thus providing easy interchangeability.
|
|
All Geared Lathe Machines - Nagmati Model NHD 400 / 450 / 500
|
|
We are the leading manufacturer, supplier and exporter of lathe machines, heavy duty lathe machines, medium duty lathe machines. Manufactured as per International standards, these machines offer longer service life and optimum functionality at the client’s site.
Special Features: - Bed is made from 25 grade cast iron and bed guide ways hardened and precision ground.
- A2-8 type spindle nose.
- Spindle bore 104 mm.
- Force lubrication system in headstock.
- All the gears in headstock are made from alloy steel hardened and ground.
- Saddle mounted push button controls.
- Bed width 560 mm having 2 vee and 2 flat guideways.
- Accuracy confirming to IS 1878 (part l) 1993
|
|
All Geared Lathe - AMT Model 200
|
|
We are the leading manufacturer, supplier and exporter of lathe machines, heavy duty lathe machines, medium duty lathe machines. Manufactured as per International standards, these machines offer longer service life and optimum functionality at the client’s site.
Standard Accessories: - Change Gear Set (Inch & mm)
- Chuck Plate
- Tool Post Key
- Centre Adaptor
- Dead Centre (2 Nos.)
- Motor Pulley
- 2 HP 3 Phase Motor
- R.F. Switch & V-Belt
- Four Position Tool Post.
- Steady Rest
- Follow Rest
- Face Plate
Optional Accessories: - Dog or True Chuck
- Coolant Pump, Tank and Nozzle
- Quick Change Tool Post I Rear Tool Post
- Taper Turning Attachment
- Splesh Guard
- Key Way Attachment
- Grinding Attachment
- Machine Lamp
- Revolving Centre
- Milling Attachment
- Digital Read Out Z.
Special Requirment:Any Special Requirment as per Customer's Drawing
|
|
Lathe Machines - AMT Under Counter
|
|
We are the leading manufacturer, supplier and exporter of lathe machines, heavy duty lathe machines, medium duty lathe machines. Manufactured as per International standards, these machines offer longer service life and optimum functionality at the client’s site. Special Features: - Bed is made from 25 Grade Cast Iron of 180 BHN hardened strictly inspected with Microlevel, Hardness Tester and Straight Edge.
- Boring of Head Stock is done on WMW boring machine fitted with induction hardeness and ground Spindle made from alloy steel.
- Apron is totally enclosed oil bath system with lever type arrangement for automatic feeds.
- DOUBLE SCREW NORTON GEAR BOX - Provided as time Saver equipment with separate Thread & Feed Shaft. Thus, feed & thread gears
- could be changed rapidly and decreases the wear and tear in Half nut and Lead Screw.
- Hexagonal shaped Tail Stock with hardened and ground tail stock spindle made from alloy steel having external and internal grinding.
- Instruction Manual as per Indian Standard IS- 1878 (part-1) 1971.
- COLOR OPTION Emerald Green / Blue & White (Two Tone)
Standard Accessories: - Hardened & Ground Bet Ways
- Change Gear Set
- Chuck Plate
- Tool Post Key
- Centre Adaptor
- Motor Pulley
- Four Position Tool Post.
Extra Accessories: - Electric Motor
- Dog Chuk, True Chuck
- Coolant Pump, Tank and Nozzle
- Quick Change Tool Post / Rear Tool Post
- Taper Turning Attachment
- Reverse- Forward Switch, Vee Belts
- Steady Rest
- Follow Rest
- Face Plate
- Splash Guard
|
|
Lathe Machines - AMT Model Heavy Duty Lathe
|
|
We are the leading manufacturer, supplier and exporter of lathe machines, heavy duty lathe machines, medium duty lathe machines. Manufactured as per International standards, these machines offer longer service life and optimum functionality at the client’s site. Special Features: - Bed is made from 25 Grade Cast Iron of 180 BHN hardened strictly
- Boring of Head Stock is done on WMW boring machine fitted with induction hardened and ground Spindle made from alloy steel.
- Apron is totally enclosed oil bath system with lever type arrangement for automatic feeds.
- DOUBLE SCREW NORTON GEAR BOX:- Provided as time Saver equipment with separate Thread & feed Shaft. Thus, feed & thread gears
- could be changed rapidly and decreases the wear and tear in Half nut and Lead Screw.
- Hexagonal shaped Tail Stock with hardened and ground tail stock spindle made from alloy steel having external and internal grinding.
- COLOR OPTION: Emerald Green / Blue & White (Two Tone)
FEATURES OF DELUXE MODEL HEAVY DUTY LATHES: - BED CONSTRUCTION: 4V TYPE
- NORTON GEAR BOX: DOUBLE SCREW TYPE
- DOUBLE BEARING IN FRONT OF HEAD STOCK (TOTAL THREE BEARING)
- UNDERCOUNTER V-BELT DRIVE (NO BELT OUTSIDE)
- HEAVY NORTON GEAR BOX
- AVAILABLE IN 7'; 9'; 12'; 16' BED LENGTHS AND HEIGHT OF CENTRE : 12"/15 WIDTH OF BED : 15"
Standard Accessories: - Hardened & Ground Bed Ways
- Change Gear Set
- Chuck Plate
- Tool Post Key
- Centre Adaptor
- Motor Pulley
- Four Position Tool Post.
- Steady Rest
- Follow Rest
- Face Plate
Extra Accessories: - Electric Motor
- Dog Chuk, True Chuck
- Coolant Pump, Tank and Nozzle
- Quick Change Tool Post / Rear Tool Post
- Taper Turning Attachment
- Reverse - Forward Switch, Vee Belts
- Splash Guard
|
|
Lathe Machines - Extra Heavy Duty Lathe (Planer Type Bed)
|
|
We are the leading manufacturer, supplier and exporter of lathe machines, heavy duty lathe machines, medium duty lathe machines. Manufactured as per International standards, these machines offer longer service life and optimum functionality at the client’s site. Technical Data: | Model | PL-600/1 | PL-600/2 | PL-700 | PL-850 | | 1. Height of Centre (MM) | 550(22”) | 600(24”) | 700(28”) | 850(34”) | | 2. Bed Width (MM) | 600(24”) | 650(26”) | 750(30”) | 900(36”) | | 3. Bed Type | 2-V2- Flat / 4-V TYPE BED | | 4. Swing Over Bed (MM) | 1000 | 1100 | 1300 | 1600 | | 5. Swing Over Cross Slide (MM) | 800 | 900 | 1100 | 1400 | | 6. Spindle Nose (MM) | 6 | | 7. Spindle Bore (MM) | 100 / 125 / 150 / 175 / 200 | | 8. Spindle Speed (MM) | 6 / 15 - 150 | | Length | ABC | | 9’ | 1000 | | 10’ | 1300 | | 12’ | 1900 | | 14’ | 2500 | | 16’ | 3100 | | 18’ | 3700 | | 20’ | 4300 | | 22’ | 4900 | | 24’ | 5500 | | 26’ | 6100 | | 28’ | 6700 | | 30’ | 7300 | Standard Accessories: - Hardened & Ground Bed Ways
- Change Gear Set
- Chuck Plate
- Tool Post Key
- Centre Adaptor
- Motor Pulley
- Four Position Tool Post.
- Steady Rest
- Follow Rest
- Face Plate
|
|
|
|
