Purity in this product ranges from 92% - 95% maximum of Calcium Carbonate. Product has many application in various Industries. It is a pure white fine powder of 500 mesh.
The Chemical & Physical analysis of the above product would be: CaCO3 ( + 1%) : 95 % Magnesium : 0.50 % Alkalies : 0.12 Insoluble in HCL : 2.5 % - 3.5 % Iron as Fe2O3 : 0.40 % Silica as SiO2 : 2.5 % - 3. 5 % Specific Gravity : 2.65 Bulk Density : 1.00 Moisture : 0.50 % Sieve residue by Wt. on 75 Micron : 2.00
Packing: 50 kgs. HDPE/PP laminated bags.
General uses and application of the product:
In Cement Paints.
In manufacturing of Putty Powder.
Sealant applications on polyurethane, polysulphide and silicon.
Sealants for construction and insulation glass applications, as rheology modifier giving slump control.
In Mineral Trade when a product is Processed to a fineness where test sieve is not available for testing, its fineness can only determined in microns then we call the product as Micronised i.e. usually at a level of 700 mesh minimum. This product exactly is same like High Grade Calcite except fineness, Its fineness is 700 mesh and we can call it 20 micron.
The Chemical & Physical analysis of the above product would be: CaCo3 : 95% SiO2 : 2.0% Ph : 9.3 Specific gravity : 2.65 Bulk density : 0.90gm/cc
Packing: 50 kgs. HDPE/PP laminated bags.
General uses and application of the product: It is used in the manufacturing of Cement Paints
It is a fine powder of Calcite with 4% - 7% magnesium with Calcium Carbonate. Presence of Magnesium used to give white colour to the product. It is fine powder of 700 mesh. We are Processing this product at our Porbandar unit Salem unit dispatching directly from there
The Chemical & Physical analysis of the above product would be: CaCO3 ( + 2.5) : 90 % MgCo3(+ 1.5) : 8 % Bulk Density : 0.85 - 0.90gm/cc Oil absorption : 20 - 24 ml/100gm Ph : 9
Packing: 50 kgs. HDPE/PP laminated bags.
General uses and application of the product:
As this product is very fine material it has good applications in Paint Industry.
Indian Chemical & Minerals is processing fine Quality of Calcined Magnesite using best Quality raw material. Because of Quality Control from first step it is able to maintain good consistency in Quality of end product. The Chemical & Physical analysis of the above product would be: MgO : 70 - 80 % min SiO2 : 14 - 18% CaO : 2 - 4% Loss on ignition : 2.5 – 3%.
Packing: 50 kgs. HDPE/PP Once used good Quality bags.
General uses and application of the product: This product finds applications in many Industries like Chemical Industries, Water treatment, Acid neutraliser and many other Industries. Rates are very competitive and immediate shipment is available.
Kaolin is the common name for the mineral products compromised totally or substantially of the aluminum silicate clay mineral kaolinite. It is light brilliant in colour and absolutely pure in nature and of very fine particles usually around 2 – 4 micron. The Chemical & Physical analysis of the above product would be: SiO2(SiO2) : 52% Alumina> (Al2O3) : 36% Ferric Oxide (Fe2O3) : 0.4 + 0.2 Titanium (TiO2) : 0.3 + 0.1 Magnesia (MgO) : 0.35 + 0.1 Calcium Oxide (CaO) : 0.4 + 0.1 Undermined (R2O3) : Below 1.0 Loss on Ignition : 5.50 – 6.00 Colour : Super White Moisture : Below 1 Maximum Specific Gravity : 2.5 Bulk Density : 0.38 + 0.02 pH : 7.5 + 0.5 Brightness : 94 + 1 Surface Area : 11- 12 M2/g Oil absorption : 50 + 2 Residue on 500 # BSS : Nil
Packing: 25 kgs. HDPE/PP laminated bags.
General uses and application of the product:
InPaper, Rubber both natural and Synthetic and Paints Industries Kaolin is used as Filler
It is a very much useful raw material in Industries like Printing Inks, Plastics, Films, White Cement, Glass fiber and Cosmetics and many other Industries.
Indian Chemical & Minerals is Processing fine Quality of Micronised China Clay using Ist grade lumps of Sojat & Jartaran in Rajasthan at its Unit at Jodhpur. Due to Control over Quality from material stage itself ICM is able to maintain its Quality to the highest Standards & Not giving any chance to user Industries to find any problem in its use while making their products.
The Chemical & Physical analysis of the above product would be: Silica (SiO2) : 52% Alumina(Al2O3) : 36 + 02 Ferric Oxide (Fe2O3) : 0.4 +0.2 Titanium(TiO2) : 0.3 + 0.1 Magnesia (MgO) : 0.35 + 0.1 Mixed Oxide (CaO) : 2.8 + 0.1 Loss on Ignition : 10% – 12% Colour : Pure White Moisture : Below 1 Maximum Specific Gravity : 2.5 Bulk Density : 0.40 - 0.45 pH : 4.5 - 6.5 Brightness : 80 + 1 Oil absorption : 42 + 2 Residue on 700 # BSS : 1% Packing: 50 kgs. HDPE/PP laminated bags.
General uses and application of the product: It is most suitable for Paint, Rubber and many other Industries. Rates are very competitive and immediate shipment is available.
Indian Chemical & Minerals is Processing fine Quality China clay lumps from Trivandrum Belt into very fine Quality Powder of China clay Branded as Superfine China Clay Powder at its unit at Rajapalayam.
The Chemical & Physical analysis of the above product would be: Silica : 48% Alumina : 36.5% TiO2 : 0.3% Ph : 7.5 Brightness : 80%
Packing: 50 kgs. HDPE/PP laminated bags.
General uses and application of the product: It is mostly used in Rubber, Paint, Leather, Cosmetic, Insecticide, Textile, and in many other Industries.
Talc is a naturally occurring " SOAP STONE - STEATITE". It is also called as French chalk, soap stone powder. It comes in brilliant white and off color. The value of Talc lays in its extreme Softness, Smoothness, and Slippery Lubricating properties, High Luster Sheen, Chemical Inertness, High Fusion point, Low Heat Electricity Conductivity Pigment extenders.
Indian Chemical & Minerals Is processing four grades of TALC depending upon the and other parameter of the finished product. Presently we are having following four grades namely:
ICM – TALC – GRADE :: XL
ICM – TALC – GRADE :: P
ICM – TALC – GRADE :: S
ICM – TALC – GRADE :: H
Packing: 50 kgs. HDPE/PP laminated bags.
General uses and application of the product: Paper : Incorporated smoothness, brightness to paper & partially replaces TiO2. Also acts as pitch absorber. Paints : Highly recommended for wood finishes, primers, putties, undercoated, architectural finishes, water based coatings. Its laminar structure helps in better corrosion protection and also improves exterior durability of paints. Recommended for epoxy paints. Ceramics : Talc improves resistance to thermal shocks and gives superior electrical properties. It gives greater toughness to speak plugs and switch boards. It also improves dry pressing resistance of ceramic bodies. Foundries : Used in mould making and for final finish. Plastic & Rubber : Used in variety of application as filler. Cosmetics : It forms body of talc and its slip properties and silky smoothness makes it essential for cosmetic products. Normal Supplies : 300mesh, micro talc in both SSW and off white color.
For more info please refer to the attached PDF file:
Commonly known as Sodium Bentonite, Sodium Montmorillonite. This product has very high Yields and low iron oxide. The Chemical & Physical analysis of the above product would be:
General uses and application of the product: This product meets all the requirements of Drilling Grade Bentonite and is suitable for most normal drilling conditions.
Calcium Carbonate produced by Indian Chemical & Minerals is processed from the naturally occurring Lime Stone and special care is taken while processing the mineral keeping in to consideration the various and ultimate quality it find versatile uses in the different types of industries.
The Quality parameters are as follows: CaCO3 ( + 0.5 ) : 98.5% SiO2 : 0.5% Brightness, Elrepho, fine powder ( + 1% ) : 94% Bulk density : 0.90 gm/cc
Calcium Carbonate produced by Indian Chemical & Minerals is branded in to CALCARB and segmented to various CALCARB such as CALCARB - H, CALCARB - S, CALCARB - P and CALCARB - VA. All these brands are specially developed according to the end uses of particular industries.
Packing: 50 kgs. HDPE/PP laminated bags. General uses and application of the product:
Calcium Carbonate – CALCARB - H This product is a very much useful raw material for various Industries such as Plastics, Paints, Paper, Food and Pharmaceuticals. In Paper Coating it is used for brightness, Smoothness, Opacity and Ink receptivity.
Calcium Carbonate – CALCARB – P This product is of higher chemical purity and it finds application in many Industries like Plastic, Paper, and Paints etc. It is used as filler in Rubber Mixing, Rubber Moulding and Rubber Compounding to improve the strength.
This product is also used as a Calcium Source, as an antacid, as a neutralization aid in antibiotic manufacturing in Pharmaceutical Industry.
Calcium Carbonate – CALCARB – S This product finds application in many Industries like PVC footwear, Cable Compound Manufacturing, Emulsion Paints, Adhesives, Rubber Industries, Cosmetic Industries and in manufacturing of printing inks and etc.
Calcium Carbonate – CALCARB – VA It is a fine powder and is used in Cosmetic Industry, Vertinary Drug Manufacturing and in Cattle Feed Industry etc.
For more info please refer to the attached PDF file.
Indian Chemical & Minerals process fine quality magnesium oxide using highest quality raw material from the minerals occurring in Salem as well as Mysore. It has processing unit of 20 M.T. per day. Because of quality control from first step it is able to maintain good consistency in quality of end product.
The Chemical & Physical analysis of the above product would be: MgO : 85% + 2% Silica : 11.5% + 1.5% Fe2O3 : 0.34 % Loss on ignition : 2 – 3.5 % Packing: 50 kgs. HDPE/PP laminated bags.
General uses and application of the product: This is a very much useful raw material in leather tanning, Chemical Manufacturing, Cattle feed, Trace minerals, Chemical Applications, water treatment, Acid neutralizer and many more other Industries. Rates are very competitive and shipment available within one fortnight.
This product is a processed powder form of natural occurrence and is used in all other places where Calcium Carbonate is used it can be at a place where cost factor is involved. It is a fine powder of 200 mesh. It is found in two forms,
Argonite--- Powder of Argonite called Lime Stone Powder.
Calcite----- Powder of Calcite called Calcite Powder.
The Chemical Physical analysis of the above product would be: CaCO3 ( + 0.5) : 87% Magnesium salts : 2 - 3% Silica as SiO2 : 3 - 8% Alkalies : 1 - 2 Specific gravity : 2.5 Bulk Density : 1.10 Moisture : 0.05
Packing: 50 kgs. HDPE/PP once used bags of good Quality.
General uses and application of the product:
In Cattle Field.
In Cement Mosaic
In Chemical Industries where manufacturing of calcium based products such as Calcium chloride, Calcium Acetate etc.
All other places where calcium carbonate is used it can be Lime stone powder, if cost factor is involved.
Srishti Global Engineer Manufacturer and supplier of industrial minerals which includes aluminum oxide, silicone carbide, angular shaped aluminum oxide, hard aluminum oxide, brittle aluminum oxide, brittle silicone carbide and angular shaped silicone carbide.
Processing...
