Indigo Metalloys (P) Ltd.

We hold expertise in providing an assortment of brass tubes, pipes and sections, which are manufactured using premium grade raw material. Passed through stringent quality checks our brass tubes, pipes and sections are tailored as per the requirements of our customers. Serving the varied needs of the hardware industry, our brass tubes, pipes and sections, are available in different finishes and grades, which are as under:
 
Technical specification of Brass, Tubes & Sections :

•   67/37 Brass Tubes
•   70/30 Brass Tubes
•   Admiralty BrassTubes
•   Aluminum Brass Tubes
•   Size length,Thickness, Temper, as mentioned in the Tune & Pipe.

We offer an assortment of carbon steel material, which are fabricated using premium grade of carbon steel. Known for its durability and resistance against corrosion, our carbon steel material is used for producing several products.

Carbon Steel	Pipes & Tubes	A-106 Gr. B, A-333 Gr. 6, BS 3059, API 5L Etc.		With IBR Test Certificate & Manufacturers Test Certificate
	Butt weld [B/W] Fitting	A-234 WPB, A-420 WPL 6 B/W ANSI B16.9
	Forged Filling	A-105. A-350 LF2 ANSI B16.11 S/W & SCRD
	Flanges	Plate	A-105, A-350 Lf2 ANSI B16.5
		Forged	IS2062.A-516 Gr.70 ANSI B16.5
	Sheet, Plate, Strip, Flat S Blank	IS 2062, IS 2002, A-516 Gr.70 Etc.
	Bar [Rod] S Wire	A-105, LF2, EN Series

We hold expertise in offering a gamut of copper finned tubes, which are widely used in API heat exchangers. Manufactured using premium quality raw material such as copper, our copper finned tubes is available in various sizes. Our tubes are used ideal for heat exchanging in commercial units for cooling and heating of liquid and gas, including water, oil, steam and air as well as for condensation, evaporation and others.

 Finned Tubes :

• Sizes              : 5/8 “ (15.8mm) OD & 3/4 “(19.044mm) OD(19/26 finns per inch) Length : Specific length or up to 10 mtr.
• Thickness      : 1.6mm to 1.2mm
• Temper           : HH
• Application     : ACR, Heat Exchangers, Naval Industries
• Type                : Intergroove integrally Finned Tubes Internally Grooved Tubed, Outer Grooved Finned Tubes, Sprial Finned tubes.

Leveraging on our dexterous workforce, we offer a spectrum of copper pipes, which are manufactured using best quality raw material such as copper and its alloys. Available in customized options, our copper pipes are in line with the industry specified standards.
 
Used for: 

• Hardware


• Electric & electronic components


• Pressure gauge

 Cappillery Tubes :

• Sizes                : 6mm OD to 159mmOD


• Length              : 0.5mm to 2.5mm as per Table X, TableY, Table Z
  


• Thickness        : 10 Feet or As Requried


• Temper             : H/HH


• Application       : Piumbing & Water Lines, Sanitation.

Backed by our profound industry knowledge, we offer a range of copper terminals, copper and brass fittings, which are fabricated using 99.99% pure copper. Used for terminal connections on high voltage side of a transformer, our copper terminals, copper and brass fittings are available in various specifications such as pipe, sheet, coil and others.
 
Shapes available:

• Rectangular
• Square

 
Sizes available:

• 75 mm in length
• 75 mm width

 
The specifications of our range of copper, brass are as under:
 
Copper alloy:
 
ISS-2501
DHP-I&DHP-II
BSS-2871 -C-106 / C-107 / C-101, 2874-C- 106 / C-108 / C-109, 2874
CA- 104 2501 DPA, 2501 DPA, 2501 ETP, 1545, 4171, 288, 613
 
Brass alloy:
 
BSS-2874 CZ 110 / 2874-CZ-111/2871-CZ- 126 / 249 / 218 / 2874 / 251 / 2873
ISS-407 / 1543 / 319 / 3488 / 320 / 291 / 4170 / 4413 MS 58-17760

PANCAKE COILS :

• Sizes              : 1/8"(3.2mm)OD to 1 "(25.4mm)OD
• Length            : 50ft/100ft
• Thickness      :10 s.w.g(3.2mm) to 27s.w.g(0.4mm)
• Temper           : O
• Application     : ACR,Instrumentation, Railways, General Engineering

 
L.W.C(Level Wound Coils) :

• Sizes                : 1/4 "(6.34mm)OD to 5/8 (15.8mm)OD
  
• Length               : In continues leangth upto 1000mtrs
• Thickness         : 18 s.w.g (1.21mm) to 31 s.w.g(0.27mm)
• Temper              : O
• Application        : ACR,Instrumetation, Gas Lines,

 
Inner Grooved L.W.C :

•  Sizes                    : 7mm OD to 5/8 "(15.8mm) OD
• Length                   : In continues leangth upto 1000mtrs
• Thickness             : 0.41 mm to 0.27mm
• Temper                  : O
• Application            : ACR

We put forth a range of cupro nickel pipes [90/10] & [70/30], which are commonly used in marine applications. Available in customized options our cupro nickel pipes are in conformance with international standards.

Size range :

• Sizes                  : 2mm OD to 250mm OD
• Length                : Up to 10mtr or as required
• Thickness            : 0.30mm to 20 mm
• Temper               : O/ HH /H
• Application           : Heat Exchanger, Refineries, general engineering

 

We manufacture a gamut of duplex steel material, which are reckoned for their high tensile strength and long life. Fabricated using quality tested raw material, our duplex steel material is available in customized forms.

Duplex Steel	Pipes	As Per UNS No	UNS No. S31803 TD 2205 17.4 PH UNS No. : S32550, S32750, S32900.S17400, S31200, S32001, S32205
	Forged Fitting
	Flanges
	Bar
	Profile
	Sheet, Plate, Plate Cut
Metal Alloys	Brass Alloys	Brass Coils, Brass Bars, Brass Fittings, Brass Sheets, Brass Wires, Brass Rods, Brass Strips
	Aluminium Alloys	Aluminium Brass Alloys, Aluminium Plates, Aluminium Sheets
	Steel Alloys	Stainless Steel Angles, Stainless Steel Channels, Stainless Steel Bars, Stainless Steel Bolts, Stainless Steel Fasteners, Stainless Steel Fittings, Steel Flanges, Pipe Joints, Pipe Connectors, Clamps, Tee Fittings
	Other Metal Alloys	Brass, Bronze & Copper Blanks, Bronze Bars, Bronze Plates, Aluminium Alloys, Non Ferrous Alloys, Titanium Alloys, Brass Alloys, Copper Alloys, Nickel Alloys, Steel Alloys, Tungsten Alloys

 

Our range of metal alloys also includes, mild steel material, which is manufactured using high quality raw material.

Available in tailored options, our mild steel material is used in varied industrial applications.

Mild Steel [M. S ] / G.I.	Pipes & Tubes	IS 1239, IS 3589 [Fe 330, Fe 410] Etc.		With manufacturers test certificate & with guarantee letter
	Butt weld [B/W] Filling	IS 4310 ANSI B16.9 [Welded], ISI Mark
	Forged Fitting	S/W & SCRD ANSI B16.11
	Flange	Plate .	IS 2002 ANSI B16.5
	Sheet, Plate, Strip Flat & Blank	IS 2062
	Angle, Channel, Beam, 'T' etc,	IS 2062
	Bar [Rod] & Wire	IS, BS, DIN etc.

We provide a range of nickel alloys material, which are available in various grades. Used in diverse industrial applications, our nickel alloys material is known for its durability and high strength.

Item	Description	Specification	Grade
Nickel Alloy: Hastelloy (UNS No. N10665, N10276, N06455) Nickel (UNS No.: N02200, N02201 ,N02205) Monel (UNS No. : N04400, N05500) Inconel (UNS No.: N06600, N06601, N06625, N08800, N08825) Alloy 20 Titanium, Tungston, Kanthal, Nimonic, Nichrome, Cobalt, Sancro (28) etc.	Pipes a Tubes	IS, BS, ASTM, UNS Etc.	Hastelloy : C276, B-2 Nickel: 200/201/205 Inconel: 600,601, 625 & 825 Incolloy : 800, 800H Ferro Nickel: 55/45, 60/40, 70/30 Cobalt, Sanicro : 28, SS 904L Alloy 20, Titanium, Tungston, Kanthal Etc. Hastelloy (UNS No.: N10665, N10276, N06455 Nickel (UNS No. :N02200, N02201, N02205) Monel (UNS No.: N04400 N05500) Inconl (UNS No. : N06600, N06601, N06625, N08800, N08825) Alloy 20. Titanium, Tungston, Kanthal, Nimonic Nichrome, Cobalt, Sanicro (28) Etc.
	Butt weld [B/W] Fitting	IS, BS, ANSI, ASTM, UNS Etc.
	Forged Fitting	ASTM, BS. DIN Etc.
	Flanges	ASTM, BS, DIN Etc.
	Sheet, Plate, Strip. Flat & Blank	IS, BS, ASTM, UNS Etc
	Bar [Rod] & Wire	ASTM, BS, DIN Etc.

 

We offer a spectrum of PVC coated copper tubes, which are fabricated using qualitative raw material. Available in straight length of various sizes, our PVC coated copper tubes are available at industry leading prices.

Sizes	1/8”mm(3.2mm) OD to 1"(25.4mm)OD
Length	In cut length from 2 mtr to 14 mtr In continues length from 15 mtr to 1000 mtr
Temper	0 for soft coils H/HH for straight pipes
Application	Instrumentation, Gas Lines, Gen Engineering CNG/LPG kit Industry, Refineries
P.V.C	0.5 mm to 2 mm
Thickness
P.V.C Colour	Blue/Black/White or any colour per customer choice
Advantages	Extra resistance, prevents corrosion, enhances life span of tubes

We provide a range of stainless steel material, which are imported from china. Available in customized options, our stainless steel material is in conformance with international standards.

Stainless Steel	Pines 8 Tubes	ASTMA-312, A-358, A-213, A-249 [Seamless & ERW]		TP 304, 304H, 304L, 304LN, TP 316, 316H, 316L, 316LN, 316Ti TP309, 310, 317L, 321,347, TP 409,410, 420,430, 440A, 440B, 440C 446, 202 Etc.
	Butt weld [B/W] Filling	A-403 B/W ANSI B16.9 [Seamless & Welded [ERW]]
	Forged Filling	A-182, ANSI B16.11 S/W8SCRD[NPT/BSP]
	Flanges	Plate	A-240, ANSI B16.5
		Forged	A-182ANSI B16.5
	Sheet, Plate, Strip, Flat & Blank	A-240
	Bar [Rod] & Wire	A-479