Fine Chemicals

Our range of leather chemicals are well known in India and abroad, established brand image and repute among valuable customers. Speciality leather chemicals for all types of leather articles and continuously engaged in research and development of speciality leather chemicals are as follows -

Sub Categories   
Acrylic Resin, binders are one of the specialitities of Indofil. All Resins like soft, med soft, med hard & impregnating resins are described here.
   
Auxiliaries Finish end In this category. The speciality finishing waxes & penetrators are described.
   
Fatliquors are the speciality anionic fatliquors like bisulphited fish oil , phospholipids, lanolins, Synthetic & semisynthetic are described here.
   
Leather Auxiliaries Wet end the speciality dispersing agents, Unhairing assiting product & TCMTB based preservatives are described here.
   
Polyurathane Binders here soft & medium soft Polyurathane binders are described.
   
Protein Binders here the soft & medium soft protein binders are described.
   
Synthetic Tanning Agents The speciality Acrylic Resins, Acrylic copolymers, Chrome & Aluminium Syntans are described here.
   
Top coats & Lacquers Here the solvent & aqeuos base top coats are described.

In the world of construction sector we stand for water based paints and coatings. High performance dispersions and speciality additives that we offer are well established BRANDS in India and International market. INDOFIL MC 76 is widely accepted water proofing polymer for repairs and rehabilitation.

Sub Categories   
Binders Styrene acrylates and Pure Acrylates emulsion for water based paint formulation.
   
Cement mortar modifier Used for modifying cementitous composition
   
Dispersant Dispersing agent for organic & in-organic pigments
   
Opacifier Partial replacement of Titanium di Oxide.
   
Solution coatings for surface protection
   
Thickener Helps to increase the viscosity of the paste in alkaline media.

India's paper and paper board demand is expected to grow about 15 million tonnes (mt) from the current level of 6.5 mts in next decade. The dispersing agents that we manufacture are widely used in the paper board manufacturing companies.

Sub Categories   
Binders, mainly use for the paper and board coatings.
   
Dispersant, dispersing agent for organic & in-organic pigments
   
Opacifier, improves the opacity of coatings
   
Thickener, helps to increase the viscosity of the paste in alkaline media.

In textile Industry we are the most important manufacturing sector. We service our customers. A nation wide distribution network ensures a constant interaction with end customers which is adequately supported by our qualified and trained sales force. It is widely used in application like leading flocking, nonwoven, carpet back coating and printing segments.

Sub Categories       
Fixers These are mainly based on Melamine formaldehyde based resins, which improves the dry / wet rub fastness by proper cross-linking functions. Formaldehyde Textile fixer is available which is mainly used for the Export purpose where the formaldehyde norms are stagnant.
   
Flock Binders Mostly used for the Flocking application. These binders generally offer a soft film property.
   
Non-Woven Binders These binders are mainly used for interlinings, carpet back coating, household and Furnishing applications. This binder is mainly catagorised as per their feel 1. Soft feel 2. Hard feel & 3. Intermediate feel.
   
Printing Binders Pigment and Khadi printing are major printing style. With the use of fashionable binder, a new look is provided to print like Gold/Silver look, Rubber look, Jari look, Pearl look and Khadi print with highest strechability.
   
Softeners This generally improves the feel / Body of the cloth.
   
Thickeners Thickeners is mainly used to increase viscosity of the solution prepared for Printing / coating / Flocking application Rehology modifiers and Synthetic thickeners are available in these series 

We offer water proofing chemicals to construction industry. In India Construction Industry is on a fast growth track due to huge gap in infrastructure.

Sub-Category

Admixture It helps to reduce water consumption.
   
Plasticizers It maintains workability and improves strength of cement concrete.
   
Polymer adhesive Water proof tile adhesive polymer compound.
   
Polymer admixture Water Proof Polymer for old and new constructions.
   
Water proof coatings. Prevents the water seepage through hair line cracks.
   
Water proofing ad mixture Integral Water proofing admixture.

Introduction: Makes the Rigid PVC work better is a versatile plastic having an excellent combination of strength, chemical inertness, and fire resistance. It is, however, difficult to fabricate. Its poor hot strength and lack of cohesiveness at processing temperatures prevent it from flowing smoothly through processing machinery. Additionally, calendered and extruded PVC products may exhibit surface imperfections such as air streaks and melt fractures. Indofil K-120ND processing aid is a highly dispersible powder that prevents many problems associated with PVC processing. The excellent disperibility of Indofil K-120ND processing aid results in fewer gels of fish eyes in clear vinyl formulations. Compounds containing one to five percent of the processing aid fuse rapidly, flow smoothly, have excellent hot strength, and are readily formed. Clarity, rheology, heat stability, and crease whitening resistance of PVC modified with Indofil K-120ND processing aid are maintained. Additionally, the process used to manufacture Indofil K-120ND processing aid enhances powder flow and achieves molecular weight consistency.

Physical Characteristics

The typical properties of Indofil K-120ND processing aid are presented in Table below -

Typical Physical Properties (These do not constitute specifications)
Appearance Bulk Density, g/cc Specific Gravity, @ 25°C Refractive Index, @ 25°C Molecular Weight Volatiles (%) Sieve Test Retention time 60 mesh 100 mesh 200 mesh Solubility in Clarity in 10% toluene solution 10% Toluene Solution viscosity (cps)	White, fine free-flowing powder with uniform particle size 0.40 to 0.44 1.18 1.49 Medium Max 0.5 Max 0.5 Max 5 Max 10 Methyl ethyl ketone, cyclohexanone, terahydrofuran, toluene, and ethylene dichlorde (moderately cloudy solutions which form clear films) Clear 200-1000

Performance Characteristics

3.1 Fusion and Melt Homogeneity
3.2 Hot Strength and Flow
3.3 Plateout
3.4 Dispersibility

Agricultural Chemicals are developed for the Crop District Approach, where the needs and problems of the crops are identified and an attempt is made to meet the same by existing solutions or procuring new/right solutions. The field staff is in constant touch with the market and customers to achieve this objective. A well thought of "Journey Cycle Plan" is chalked out well in advance, taking into consideration the requirements of the area.

Our range includes -

• Acaricides
• Fungicides
• Herbicides
• Insecticides

We are one of the leading manufacturers and exporters of high efficiency Acrylic Polymer Modifier of supreme quality.

Indofil K-125 ( High Efficiency Processing Aid for PVC)
 
Introduction
Indofil K-125 is an all acrylic polymer modifier suitable as a processing aid in PVC compounds. It is 20% more efficient compared to Indofil K-120ND

Physical Characteristics

Typical Physical Properties (These do not constitute specifications)
Apperance Bulk Density, g/cc Specific Gravity, @ 25°C Refractive Index, @ 25°C Molecular Weight Volatiles (%) Sieve Test Retention time 60 mesh 100 mesh 200 mesh Calrity in 10% toluene solution 10% Toluene Solution viscosity (cps)	White, fine free-flowing powder with uniform particle size 0.40 to 0.44 1.18 1.49 Medium Max 1 Max 0.5 Max 5 Max 50 Clear 200-1000

Performance Characteristics
3.1 Rheological Properties
Indofil K-125 compared to Indofil K-120ND has following advantages during roll milling:

• Faster Fluxing
  
• Shorter Smooth Edge Time
  
• Much Shorter Rolling Bank
  
• Greater Hot Strength
  
• Greater Thermoplasticity
  
• Smoother Glossier Sheet With Well Knit Edges and Fewer Air Streaks.
  

Its efficiency is visible however with right kind of screw barrel geometry of extrudes and where criticality of finished article dimensions are of concern to the user.

3.2 Efficiency & Output rate
Indofil K-125 processing aid is designed in such a manner that the machine capacity is fully utilized to bring out fast & homogeneous melt. It effects of the ingredients by helping them in dispersing faster & mixing better. This results in improving the efficiency of the process which naturally results in improving the rate of output.


3.3 Uniform flow
PVC melt is more viscous & hot melt has a tendency to stick to Metal parts. This mostly gives interruptions in flow pattern. It leads to sometimes melt fracture. All these gets avoid when using Indofil K-125 because of its inherent tendency to provide uniform K-125 because of its inherent tendency to provide uniform flow at different degrees of shear.

Applications

These include PVC bottles, pipes, fittings, calendered films and sheets, foamed sheets and profiles. The major ones are discussed below. Dosage recommended is 0.5 – 2 parts per 100 parts of PVC resin.
 

• PVC rigid profiles
• Blow Moulding & Thermoforming
• PVC Pipes
• Injection Moulding