We offer high-power Auger Filling Machine, which is ideal for making powder from non-free flowing materials. The hopper and the machined screws of the machine are constructed in SS304 material. To start the augur machines switch it on and fill the raw material in to the weigh hopper. The moment 90% of raw material is crushed the machines speed is reduced through VFD. The weighed material is discharged through the main funnel.

Application
Augur Filling Machine is used for making Maida, Atta, Chemical Powder etc.

Specifications

Resolution	1/10000
M/C Capacity	250gms - 5kg
Accuracy	5gms or better

Liquid Filling Machine is very simple to operate. These are user friendly, they can be used in just place the container on the platform, set the target value as required. A special start button is installed, the system automatically tares the weight of container and starts filling. The moment the target weight is achieved, filling operation stops.

Application
These liquid filling machines are used in various application areas of Chemical, Food Products, Edible Oil, Paints, Lubricant & Pharmaceutical.

Specifications

Capacity	0-30kgs
Resolution	1 in 6000 counts
Power Supply	230 V ±10% 50 hz .A.C. Supply
Weigh sensor	Load cell
Display	Seven Segment LED for weigh & program values
Program	4 user friendly keys to program target weigh values
Air Pressure	5-6 bar filtered regulated air
Valve Construction	SS 304
Valve Design	Twin feed (coarse feed & fine feed)
Features	Facility to view cumulative & batch totalizer value Facility to program target no. of fills. No tin no fill Facility Auto weigh correction
Tare	Auto Tare
Optional Features	Printer port ,RS 232 port For PC interface, 4-20 ma for PLC interface.

Jumbo Big Bag Filling Machine are specially precision engineered to fill even in the difficult to handle materials. This high precision weighing is coupled with a truncated pyramid table with high power vibrators. Before leaving the filling station the filled material is weighed deaerated & densified. These bags are stable, stackable, safe & easy to handle. Empty bags are mounted by four loops hanging of the bulk bags on the suspended weigh frames. This makes them easy to reach posts. The inlet spout is protected to the flared end of filling head by a slip ring seal. The slip ring allows appropriate positioning of the liner.

Filling cycle is controlled by the micro-controller for efficient filling. The set points programmed included the target weight, fast/dribble feed, table up/ down, no of cycles, vibration on time etc. Roller conveyor is also been installed for making it more durable. The jumbo bag is placed on the pallet by using a forklift.

Available Quantities: 200, 500, 750 & 1000 kgs. The jumbo bag filling machines can be customized designed, as per clients drawing and specifications.

We also handle bulky orders depending on density of the material.

Available Sizes: 900 x 900 x 1200 mm or 900 x 900 x 1400 mm the bags are of HDPE material.

We manufacture and export high power chlorine tonner weighing system. Our chlorine tonner weighing system can be custom-built as per client’s specifications.

Specifcations

Resolution	1/6000
Capacity	50Kgs to 3 Tons
Enclosure	Flame Proof Enclosure
Platform Size	600 x 600 mm to 2 x 2 Meter
Optional	Zener Barriers

Offering premium quality hopper/tank weighing systems, these systems are highly rugged & reliable. The hopper or tank rests on three or four load cells. These load cells are installed parallel to a junction box. Signal transmitter/Weight Display Unit is connected to J.B.

Specifications

Capacity	5kgs to 250 Tones
Load Cells	Loadcells with Ip67/Ip68 protection
System	Flame Proof systems available
Resolution	1/10,000
Load cell mounting kit with Jack Bolt arrangement for easy removal of load cells.	Load cells for Agitator based tanks available.
Mounting Kits	Mounting kits in SS option

We manufacture and export premium quality belt weigher, these belt weighers are reliable, accurate & durable for almost all industrial application. It helps in measuring the rate of flow & total quantity of material loaded in a particular time period. After this the load is transferred to the belt, sensed by four different high precision load cells. Speed of our belt weigher is sensed by an incremental optical encoder (Tacho Generator). Special digital micro-controller panel is being installed to make it user-friendly.

Specifications

Displays	totaliser weight, flow rate
Two nos	4-20 ma output
Built in	diagnostics
Digital calibration	for weight
Digital calibration	for speed
Easy to install	[minimum down time]
Batch control functions	[set points]
Battery backup	memory safeguards against data loss
Capacity	5 TPH TO 1000 TPH
Power supply	230 V AC ±10% 50hz

Our nett weigher are rugged, accurate and user friendly. These machines are very easy to operate. These operator are used feed the quantity of material, which is to be bagged through the keyboard of controller.

Application
These nett weigher is used for various applications like Rice, Sugar, Dal, Cattle Feed, Chemicals, Minerals, Fertilizers etc.

Specifications

M/C Capacity[kg]	0-10, 0-25, 0-50, 0-100
Resolution	5gm
Accuracy	±20gms
Speed	5-6 bags/min
Optional	Printer interface/PC interface.
Features	Cumulative totalizer batch totalizer To set target No. of bags to be filled.
Air supply	6 bar filtered regulator air supply

We offer a continuous loss in weight feeder, which provides unparalleled versatility in handling wide range of feeding requirements. It carries a feed rate from 50 kgs to 1000 kgs per hour & also be accomplished with higher accuracy. Control of the feeder is done through highly reliable PLC based controller equipped with noise/vibration elimination technology. Weight measurement is done through highly accurate & sensitive Load cells. Various models of loss in weight Feeders are available is based on material's characteristics (Flow Properties).

• Twin screw loss in weight feeder.
• Single screw loss in weight feeder.
• Vibratory loss in weight feeder.

We - Indus, manufacture and export Electronic Gravimetric Weigh Feeders incorporating state-of-the–art machine, which is ready to manufacture continuous bulk proportioning of solids. The material is used proportionally to pass over the belt; flow rate (also cumulative value) measured & also compared with set parameters of the PLC/PID controller. The deviation increases the speed of conveyor through variable speed A.C.Drive (Closed loop control system). The cells are used to measure the belt load and special rotary encoder used to measure speed of the weigh feeder. Option features are available are interface can generate printout with SQC analysis.

Application
This weigh feeder is used for Cement, Sponge Iron, Steel, Fertilizer, Chemical, Tobacco & Petrochemical Industries.

Salient Features

• Set Points Programmable from local panel or Main Panel.
• Precision machined rollers used to provide perfect belt run & high accuracy.
• Rubber coated pulleys prevents belt slippage.
• Fully automatic Zero/Span calibration.
• Highly reliable PLC (with in built PID algorithm) & variable speed AC drive.
• High precision load cells with damping to obtain best results.
• Empty Belt Correction Factor to achieve best Accuracy.
• Gravity takes up to ensure constant belt tension.
• Scrappers to prevent belt damage & tare changes.

Specifications

Allen Bradley	PLC + ABB DRIVE
Capacity	100kg/hr to 2000 t/hr
Belt width	500 mm to 2000 mm
Accuracy	± 0.5% of set feed rate
Pulley center	1300 mm to 6000 mm.

Our lorry weigh bridge are available in LWB series. These weigh bridge are specially designed to suit various industries as well as public road weigh bridges. Rugged in design these machines are constructed with structural steel girders and rolled sections with heavy MS top plate-installed with anti-skid facility. State-of-the-art technology is used for the weighing electronics and load cells. Data processing & printing is user friendly and can be customized as per client requirements.

Load Cell

• Double ended shear beam.
• Highly rugged & accurate.
• Hermetically sealed – IP68.
• Inbuilt Surge Voltage Protection offers protection from lightning strikes.
• Suitable for wash down application.
• Standardized O/P: Ideal for muti cell applications.
• Side load immunity.

Intelligent Terminal

• Micro controller based.
• Auto zero tacking.
• Half inch bright LED weight display.
• Full digital calibration.
• 2x16 character LCD for data entry.
• RS 232/422 O/P for computer interface.
• 1000 weighment memory (expandable).
• Customized ticket printout.
• Standard ASC II keyboard for data entry.
• Summary report printouts.

Remote Display

• 1" / 2"/ 4"/ 6" size available.
• High visibility.

Specifications

Capacity (Ton)	Resolution [Kg]	Platform Size [m]	No.of Load Cells
20	5	6X3	4
30	5	9X3	4
40	10	12X3	4

Our superior quality batch controller is used in various applications of Chemical, Pharmaceutical, Cement, Paper, Sugar and Food Industries.

Application
These batch controllers are ideal for Hopper Weighing, Tank Weighing, Batching, Liquid Filling, Bagging etc.

Specifications

Power Supply	115/230V A.C ± 10% 50 Hz ± 3Hz
CPU	Micro-controller
Excitation	10V /15V
Sensitivity	1m V/COUNT
Accuracy	± 0.01% FS
No. of load cells	6Nos of 350 ohms/12 Nos. Of 700 ohms
Resolution	1 in 6000(optional 1 in 12,000
Zero Tracking	Auto Zone
Calibration Digital	(Programmable through Keyboard)
Display	5 ½ digit seven segment led display
Serial	RS232C or RS485
Printer Interface	Centronics Parallel Interface(optional)
Digital Outputs	Four Potential Free Contact Inputs
Digital Inputs	Six Relay Outputs(1.5 amps 230v)
Analog Output	Isolated 4-20 ma Analog Output
Operating Temp	0° C to 55° C.

We undertakes turnkey projects with complete PLC, SCADA & Control Panels. Indus has successfully installed and commissioned projects with Allen Bradley, GE Fanuc, Siemens, PLC's etc.