Testing And Measuring Instruments

The Ampere / Volt Meters are an electronic device used for measuring voltage, current. These meters are known for their high performance and display dc voltage with 99. 9% accuracy on big seven segments. Extremely simple and easy to use, these meters are commonly used in cars, jeeps and various other automobiles.

Features:

• Consumes less power
• Fast reading capability
• Provides common cathode facility

The temperature & Humidity Meter provides complete digital panel solutions. This technologically advanced range of Meters is widely used for measuring and displaying temperatures. Known for their high accuracy and reliability, these are commonly used to measure relative humidity and temperature in homes, offices, and laboratories. The meter also has inbuilt alarms standard and can also be programmed to activate on low or high set points.

We offer following models:-

We offer Insulation Tester / Meggar, which is equipped with a hand driven generator and a solid state circuit for stabilizing the DC output. As the most common cause of the electric break down is the malfunctioning of insulation, thus it needs to be tested on regular basis. The testers are useful for accurately testing the insulation of power distribution lines, electrical rotating machines, insulators, control and switching equipment and communication cables. Some of the highlighting features of Insulation Tester / Meggar are given below:

• Direct Reading
• Readings independent of speed of rotation
• Equipped with an infinity adjusting device
• Sturdy and long lasting design
• Complying with the ISS & ITD specifications
• Prompt response

We offer following models:-

CIE, Fluke, Waco Analog, Waco Digital DIT - 622, Kyoritsu, Rishabh, Meco, Rishabh DMM+INSU MIT 30

Multi Meter offered by us is procured from some of the industry leading manufacturing organization of the country. Developed as per set industry standards, these meters are suitable for power lines and parallel instruments. We offer our range in both standard and customized specifications as per the requirements of our clients.

We offer following models:-

MECO , RISHABH , WACO 1, WACO 2 , WACO 3, WACO 19TB, MASTECH MS 8217,MASTECH MS826 SERIES , MASTECH MS 8260G (NEW), KYORITSU DM 1009 , WACO 3130B , MOTWANE DM-3540A , MOTWANE DM-6K1 , FLUKE 170 SERIES , FLUKE DMM115 , FLUKE 87V , FLUKE 287, FLUKE 289 ,FLUKE 15B/17B , UNIT UT10A (POCKET TYPE) , LT AR 20 (POCKET TYPE) , RISHABH MULTI 20 - 5 3/4 DIGIT - NEW , METRO-Q 70A - KEY TOUCH , MEXTECH 15B/17B (NEW)

The Fluke 9040 is effective for measuring phase rotation in all areas where threephase supplies are used to feed motors, drives and electrical systems. The Fluke 9040 is a rotary field indicator and can provide clear indication of the 3 phase via an LCD display and the phase rotation direction to determine correct connections.

It allows rapid determination of phase sequence and has a voltage (up to 700V) and frequency range suitable for commercial and industrial applications. Test probes supplied with the instrument have a variable clamping range for safe contact, especially in industrial sockets.

Features:

Included Accessories

• Fluke 9040:
• Flexible test probes - black (3)

Output Voltages:

The output voltages are continuously adjustable by coarse and fine front panel controls. Output voltages is continuously displayed on 3½ digits, LED display of 12.5mm height with accuracy of ±0.5% ±2 least counts. (Voltmeters in models 30B/ 30C/ 30D/ 92B/92C/ 92D/ 36A/ 36B/ 36C/ 32/ 32B/ 32C/ 32E have 3 digit displays.) Output voltage can be floated on any live voltage or any of the two voltage terminals can be grounded to get positive or negative voltage.

Load Current:

Load current is displayed on 3½ digit, LED display of 12.5mm height, with accuracy of ±0.5%±2 least counts. (Current meters in models 30C/ 34C/ 36C/ 32C have 3 digit displays). Maximum value of output current can be limited from less than 10% to 100% of the capacity by continuously adjustable coarse and fine controls.

• 3 ¾ Digits LCD Display with 3999 count
• Auto Ranging Compact Size Tester
• DCV: 400mv / 4 / 40 / 400 / 500V
• ACV: 4 / 40 / 400 / 500V
• Resistance: 0~400
• Ω / 4 kΩ / 40kΩ / 400kΩ / 4mΩ / 40 mΩ
• Capacitance: 4nf/40nf/400nf/4uf/40uf/200uf
• Frequency: 10Hz – 10MHz
• Duty Cycle: 0.1%-99.9%
• Diode test , Continuity test, Low Battery Indication
• Data hold & Auto Power Off

• High Voltage Breakdown Testers
• are useful for checking breakdown (flash-over) voltages of motors, transformers, pumps, chokes, coils, switches, connectors, plastics, rubbers, PCB’s, insulation materials, electrical and electronic components etc.
• Useful for industries, railways, electricity boards, defence, communication centers, R & D organizations,laboratories, colleges, service centers etc.
• Automatic tripping facility, HT ON and HT OFF visual indications, HT ON buzzer, high voltage safety probe with push button enable features, provide operator’s safety.
• HT voltage and leakage current meters provide continuous readings,simultaneously.

Specifications:

• Zero adjustment

• 200P range ±(0.5% rdg+ 1dgt+ 0.5pF) test frequency 820Hz

• 2000P/20nF/200nF/2uF/20uF/ 200uF ±(0.5% rdg+ I dgts)

• 2000uF ±(2.0% rdg+1dgt)

• 20mF ±(4.0% rdg+ 1dgt)

• Testing frequency 820Hz on 200P to 2UF ranges

• Testing frequency 82Hz on 20UF range

• Testing frequency 8.2Hz on 200UF to 20mF ranges

Functions:

• 9 test ranges 200pF - 20mF

• Display rate 0.5 second approx.

• Zero adjustment ±20pF approx.

• Use to calibrate the " Sound Level meter " precisely.
• 1000 Hz frequency .
• 94 dB Sound Pressure Level
• Suitable for 0.5 & 1 inch microphone. Total harmonic distortion : 2 %.
• According IEC942, Class 2 Standard
• Power by 006P DC 9V battery, 2 PCs.
• Durable bench type housing case.
• Built-in over input protection.