Ins - Tech Engineers

We are engaged in offering the Coordinate Measuring Machines (CMM) that is used for measuring the large objects along with standard geometry. The range is procured from well established manufacturers and is tested on various quality parameters before procurement. The device is in-line with set industrial norms and advanced technological standards.

Avail from us a wide range of Micrometers that is required in various industrial and laboratory applications. It is a device widely used for the precise measurement of small distances. These are procured from various well known manufacturers keeping in mind different quality parameters. Fabricated using high quality materials in compliance with set industrial standards, these are available in various technical specifications and provide accurate results.

The Portable CMM offered by us is sourced from renowned vendors in adherence with set industrial norms. It is ideal for measuring sheet metal parts, patterns, dies, molds and large objects along with standard geometry. The machine can be easily setup after being carried up to the object by hand.

The Profile Projectors offered by us is an optical instrument that can be used for measurement and industrial inspections. It is procured from DynaScan, which is one of the leading manufacturers of the domain. The profile projector presented by us is very reliable and durable and find large application in various heavy engineering industries.

SD Series digital spring tester, is a special instrument widely used in such industries, push& pull test, the spring extension/compression test,and so on fields for testing push /pull ,extension/compression in a allowed capacity.

Peak holding and auto-releasing function: Catching and holding the peak value in test,showing it on display for 1- 10 seconds, then releasing the value and being ready for the next peak; Automatic power off function: Power off time(1-60minutes) can be set by yourself; Memory function: Memory 10 testing data, and calculate the average; RS-232C output: The output provides communication connector; Inside printer: Printing 10 groups of tested data, the max and min value,the average value, the eligible and unqualified value.

This instrument is compatible with four standards of ISO, DIN, ANSI and JIS and is widely used in production site to measure surface roughness of various machinery-processed parts,
* Very easy to operate

* Multiple parameter measurement: Ra, Rz

* Can communicate with PC computer for statistics, printing and analysing by the optional cable and the software for RS232C interface.

*Manual or automatic shut down. The tester can be switched off  by pressing  the Power key at any time. On the other hand, the tester will power itself off about 5 minutes after the last  key operation.

Specifications:

Display??? 4 digits, 10 mm LCD, with blue backlight

Parameters:  Ra, Rz

Display  Range

           Ra:   0.05-10.00um/1.000-400.0uinch

           Rz:   0.020-100.0um/0.780-4000uinch

Accuracy: Not more than 10%

Fluctuation of display value: Not more than 6%

Sensor :

         Test Principle: Inductance type

         Radius of Probe Pin: 10um

         Material of Probe Pin: Diamond

         Measurement Force of Probe: 16mN(1.6gf)

         Probe Angle: 90°

         Vertical Radius of Guiding Head: 48mm

Maximum driving stroke:  17.5mm/0.7inch

Cutoff length (l): 0.25mm / 0.8mm / 2.5mm  optional

Evaluation length:  1~5 cut off  optional

Driving speed:

         sampling length = 0.25mm   Vt=0.135mm/s

         sampling length = 0.8mm    Vt=0.5mm/s

         sampling length = 2.5mm    Vt=1mm/s

         returning                                Vt=1mm/s

Resolution : 0.001μm    if reading ???10μm

                      0.01μm    if 10μm≤reading???100μm

                      0.1μm    if reading ≥100μm                              

Power Li-ion battery: rechargeable

Operating conditions:  Temp. 0~50???

                                      Humidity <80%

We offer qualitative Torque Wrench which consists of a long lever arm between the handle and the wrench head. It is used in applying a specific torque to a fastener. It is used where the tightness of screws and bolts plays a crucial role. The wrench allows the operator to measure the torque applied to the fastener for a particular application. Full metal construction of wrench helps in the rough handling on construction sites, in work shops and in various industries.

We are involved in offering various types of Mitutoyo, TESA & Mahr Make Vernier Calipers. It is a well known device that is used in measuring the distance between two opposite sides of an object. The tips are adjusted to fit across the points to be measured. Sourced from reliable vendors, the range is highly qualitative and durable. Easy in operation, the calipers are excellent on functionality and provide accurate results. The range is tested on various quality parameters before procurement to make sure that these are in compliance with set industrial norms.

We are the well known traders of a comprehensive range of Vision Systems. These systems are procured from DynaScan and are popularly used for the measurement applications. The systems provide accurate and complex reading and find application in color image analysis

• Multiple cameras

• Electronic components

• Medical devices

• Automotive parts

• Disposable consumer goods and packaging & pharmaceutical.