Signal Isolators of our brand is also known as transducers are mainly utilized in process control system. This isolators are mainly used only when there is a ground loop problems, to protect the transmitting and receiving instruments (PLC, DCS) or where there is a requirement to carry the signaling process for long distance that is used for converting the voltage signal to current signal with excellence and accuracy.
In fact signal isolators of our brand provide total signal isolation between a non- isolated materials and a receiving device. Actually this reduces faulty reading in process of measurement and control equipment.

Buffer amplifier of our brand is utilized only when signal isolation is required or in places where higher load driving capacity is required for the model 4-20 mA O/P. Actually this model is used where Analog Output Module PLC/ DCS are unable to deliver this facility.
Other than the above mentioned functions buffer amplifiers of our brand are used to transfer voltage from one circuit with high output impedance level to the second circuit with low level input impedance.

Signal Multipliers are primarily utilized for isolating input signal from output signal. It finds its applications where two or more output signals are corresponding to a common input signal and are completely isolated from each other and also from input signal and power supply (3 Port Isolation- 2kV). Some of the examples of this applications are Input Signal from Shunt (0-75mVDC) which requires 3 outputs, 4-20m ADC for monitoring to PLC &0 to +/-10VDC for multiquadrant Drive (AC or DC), 4-20m ADC for monitoring to PLC & 0-10VDC for metering.

Salient Features:

• 2 kV Isolation between Input, output and Body (for 1 Output Type) and 2 kV Isolation between respective Outputs (in case of 2 or 3 Output Signals)


• Choice of Inputs & Outputs.
• Excellent Linearity.
• 35 mm DIN Rail / Back Panel mounting.


• Temperature Compensated Circuit.

Technical Specifications:

• Input Signal : 0-10VDC, 0/4-20mADC, 0-75mVDC, 0 to +/-10 VDC, RTD, etc.


• Output Signal : 0-10VDC, 0/4-20mADC, 0-75mVDC,
• 0 to +/-10 VDC. Input Impedance : 500 Kohms for Voltage Inputs & 51 ohms for Current Inputs.


• Dimensions : 60(W)x70(H)x110(D) cu.mm.-for single/dual Output (ABS Hsg.)
>220(W)x90(H)x120(D)cu.mm.-for triple Output (Metal Hsg.)
• Output Burden : 500 ohms for Current Output.


• Accuracy : 0.1% of FSD.
• Site Adjustment : zero & span trimpots provided.


• Aux. Power Supply : 230 / 110 VAC +/- 10%, 50 / 60 Hz.
• 220(W)x90(H)x120(D)cu.mm.-for triple Output (Metal Hsg.) Isolation : 2 kV

We are one of leading manufacturer of diversified range of Din Rail Mounted Relay Boards in India and also manufactured it for the first time in the nation since 1991.
Our din rail mounted boards are perfect when contact amplification or isolation is needed. It is ideal for interfacing PLCs and DCS.
It is available in four channels like 1, 2, 3 and 8. Some of the relays which we manufactured are Omron, Oen, Finder, Sunhold, Good sky and Leon. Relays we offer are available either in directly soldered PCB or in PCB mounted socket with the capacity to retian. Some other unique features of our relay board are:

• Different Logics such as VE COM & -VE COM are offered.
• Coil Voltages available are 12 & 24 VDC, 110 & 230 VAC as standard. Other Voltages available on request.


• Available in 1 NO, 1 CO, 2 CO, 3 CO & 4 CO options.
• Fuse / non-Fuse versions available.


• Passive Interface Modules FRC / D-Sub / IDC connector with LED indication.
>Diode Oaring Modules.
• Customized options available for PLC Brands of SIEMENS,ROCKWELL, GE FANUC, TELEMECHANIQUE, etc.


• Solid State Relay Modules
• Each relay is equipped with Free Wheeling Diode across relay coil for protection against back EMF as well as LED for Channel HIGH indication.


• Different mounting bases such as molded base in Engineering Thermoplastic or ECO range comprising Powder Coated Sheet Metal Base / Acrylic Base; all DIN Rail mountable

Field Interface Modules are specially utilized to interconnect devices in industrial sectors. It is used to expand traditional terminal block I/O by including the blocks, high density electronic connectors. These are available in standard market size and we also customize it as per customer's requirements.

We are reckoned in the market for introducing modern indigenous and imported range of 24 VDC low cost SMPS for powering equipments like PLCs / DCS or loads required for stabling voltages of 24 VDC with good regulation capacity, low ripple, high accuracy and protecting overloading with current fold back limiting. This is available in different wattages like 15 w, 25w, 50w, 60W, 100W, 150W, 200W, 240W & 350W. All these SMPs are covered in sheet metals that are suitable for back panel mounting. Our this products are catering to Pharma & Packaging M/cs, CNC M/cs, Control Panel manufacturers as well as System Integrators of SIEMENS, ROCKWELL, SCHNEIDER, GE FANUC and ABB etc.