Our range of toggle switches includes:

Toggle Switches	Description	Applications
Series 20	These integral series 20 toggle switches meets the needs of high current carrying in small volumes and are available with popular actuator types & sizes. Its features include: Standardisation of design in components used from single to fourpoles This series has JSS approved configurations	In power supply ON / OFF. Switch circuit Circuit Switching Available from 1Pole 2Way to 4Pole 2Way Can be used in any kind of electronic circuitry like relays, motors Low signal switching Comes with Gold Plated contacts
Series 29	Our range of PCB type integral miniature plastic switches are used in horizontal operations and meet the needs of applications wanting low current carrying switches in a small volume for dry circuit operations. They are available with different colored levers (Actuators)	In electronics circuitry Used in analogue change over circuitry Option of including low power relays, solenoids & motors as long as the electrical specifications are met with the switches
Series 50	These integral tiny toggle switches embody complete design features of our popular miniature toggle switches including: Epoxy sealing of terminals Silver inlay contacts for higher current operation Gold plated for low-level circuit operations PC versions with Mounting on 0.1" (2.54mm). DOT approved versions also available	Circuit switching Available In 1Pole 2Way and 2Pole 2Way Can be used in any kind of electronic circuitry that meets electrical specifications of the switch Low signal switching

We offer to our clients a wide range of thumb wheel switches which are known for delivering optimum performance. The range offered by us include:

Thumb Wheel Switches	Description
Series 80	Our integral type TWS-80 thumb wheel switches are small in size and are extensively used in a wide variety of applications like in instrumentation, machine controls, process controls, etc. Its features include: Sturdy rear-mounted type fixed with screws to the panel and available with an extensive range of output codes Up to 10 modules can be easily coupled with sides, to form any combinations as per clients requirements Switches have a positive detent action to ensure that positions snap in to place Feature hot-stamped large digits for good visibility Can be ordered either as complete assemblies or as modules with sides separately
Series 82	Our integral type TWS-82 switches which are fixed from front of the panel, and are snap mounted without screws. The other features are same as in series 80.
Series 86	Our integral type push wheel switches are easy to assemble and requires no hardware. Ite bidirectional rotation feature also makes it reach any digit easily. Further hot stamped characters are easily readable.
Series 88	Our integral series 88 thumb wheel preset switches can be mounted directly to the PCB and offer most economical method of hand setting digitally coded values. It's designing helps in eliminating wiring requirements and needs very less space for mounting in horizontal and vertical directions. Further the 10 or 16 legend locations also assure readability from top or side. They can be set by Knurled wheel, screw driver or extended shaft with finished bezel allowing front panel mounting.

We offer to our clients a precision manufactured rotary switches, which are well known for delivering optimum performance. The range offered by us include:

Rotary Switches	Description
Series 23	Our integral series 23 professional grade rotary switches are suited for use in industrial laboratory equipment. The variety of switching configurations provided meet complete design requirements of the user
Series 25	Our integral series 25 professional grade rotary switches are suited for use in industrial & laboratory equipment. Apart from the common features of series 23, they are also available in JSS versions
Series 34	Our PCB type Integral Series 34 rotary switches, are designed primarily for use in oscilloscopes, directly on the PCBs. The switches are made with 30 degree index angle & the sequence of switching are made as per clients requirements
Series 35	Our range of PCB type integral series 35 rotary switch are designed primarily for direct use in PC boards & switches having 2-24 positions with 15 deg. or 2 to 12 positions with 30 deg. index angle
Series 45	Our integral series 45 professional grade rotary switches are mostly used in industrial & laboratory equipments. The wide variety of switching configurations offered by us meet complete design requirements of the users
Series 92	Our integral series 92 are miniature rotary switches of 25 mm Dia, with the design of the switch limited to a single section with Solder/PC terminals
Series 93	Our integral series 93 is a miniature rotary switch of 26.5mm Dia. Apart from the common features available in series 92, the positive engineering is provided by 2 balls housed in pressure sheet metal base plate & with ground metal shaft of 6.3mm

We offer to our clients a wide range of snap acting switches, which includes:

Micro Switches - Series 40	They come with extra long life spring mechanism and are known for their highly reliable functioning and can be used in a wide range of applications like industrial equipments, home appliances, business machines etc.	Mounting: W/O Bracket With Bracket M12 x 0.75 bush With Bracket M6 x 0.75 bush
Push Switches - Series 47	Our integral series 47 micro switches are snap acting single pole change over switches, which are actuated by plunger. These sensitive switches are mostly used in AC and DC applications, industrial and commercial equipments, communication equipment, vending machines, security systems, data systems, medical equipments, cassette recorders, VCR’s etc. , will find the switch	Features: Trigger of reset circuits in the digital circuitry Hold in display driver circuitry
Push Switches - Series 48	Our integral series 48 micro reset switches are snap acting momentary switches, which are suitable for low level & power level switching. Their high switching reliability is built into the design of the switch. Further by using a double-make, double-break design, the current rating can be increased and the switch can also be used for DC switching. Our designs also ensure low contact resistance & protection against surge currents, as in inductive and capacitance loading.	Features: Trigger / Reset circuits Can be used with power motors Solenoids & relays meet the specifications of the switches Power hold circuitry up to 7Amps @ 28V DC Extensively used in industrial, analytical and laboratory equipment

We offer to our clients a wide range of keyboard switches which are known for delivering optimum performance. The range of keyboard switches offered by us includes:

Key Board Switches	Description	Applications
Series 13	Our integral key switch series 13, meets the complete needs of our clients and is a low profile, high quality switch with a smooth tactilefeel. The use of special copper alloy in the manufacturing of the contacts ensures very high force per unit area & reduced susceptibility. It ensures closure contact interference from foreign particles.	In key-boards for digital electronics equipment In microprocessor kits, process control equipment In trigger circuits for low power electronic circuits
Series IK9	Our integral key switch type IK-9, features a well developed contact mechanism which is based on unique gold plated rotating ball, offering a fresh surface as contact, each time the plunger is depressed.	In key-boards for digital electronics equipment In microprocessor kits, process control equipment
Series 18	Our integral series of 18 key switches suit the needs for data transfer in machine tool controls & other industrial equipment where longer service life is needed. Its self-aligning plastic pins also ensure that the insertion into the PCB is easier and it does not damage the contact pins. Features: Use of gold plated beryillium copper spring contact on stator pine, ensuring a working life of more than a million cycles Provision of getting the switches hand-soldered or wave soldered Its insert-molded terminals prevent the penetration of flux & solder	In key-boards for digital electronics equipment In microprocessor kits, process control equipment

We offer to our clients a wide range of push button switches, which are known for delivering optimum and long-lasting performance. Our range includes:

Push Button Switches	Description	Features	Applications
Series 50	These integral tiny push button switches embody the design features of our popular miniature toggle switches.	Epoxy sealing of terminals Silver inlay contacts for ensuring higher current operation Gold plated for low-level circuit operation Applicable in various types of switching functions Its PC versions with mounting on 0.1" (2.54mm) save space in PCB	Circuit switching option available for 1Pole 2Way and 2Pole 2Way Can be used in diverse types of electronic circuitry Its gold plated contacts ensure low signal switching
Series 60	These integral series 60 push switches meet the needs of clients who want a high quality and high current carrying switch in small volume	Standardization of design in components used from single & two poles Delivers reliable & consistent performance Available with popular actuator types & sizes Design variations in contacts result in meeting the needs of all types of switching functions Momentary action Cap size & color can be selected to match the front panel	Circuit Switching option available for 1Pole 2Way & 2Pole 2Way Can be used in any kind of electronic circuitry like in relays, motors Low signal switching is possible because of its gold plated contacts

We offer to our clients integral Series 64 Modular Illuminated Push Button Switches giving them freedom to build switch with sub assemblies. A robust construction using mostly stainless sheets, the switch is built to take rough usage over a long time. The user can change the multi chip LED's from the front panel and the switch assembly lends itself to a large number of combinations.

• Power Supply
• For ON / OFF of switch circuit
• For circuit switching
• Available from 1Pole 2Way to 4Pole 2Way, with the option of using it in any kind of electronic circuitry like relays, motors, etc.
• Ensures low signal switching.
• Comes with gold plated contacts.

Integral Series Light Pipes, Fit in directly on PCB, transmit light to another viewing area such as front panel display. These light tubes take complex shapes that used gentle curving bends or sharp prismatic folds. Because there is no physical
connection between the light pipe and PCB mounted LED, it can be mounted or removed without disturbing the panel display.

Light transmission efficiency is greatest if tube is short. In longer and angled tubes,part of light intensity is lost. To minimize losses, high reflectivity of tube lining are used.

APPLICATION :

Using light Pipe, IIIumination can be directed up and away from PCB by several inches, whenever required, to front display panel. Precision engineered for light optically precise uniform indication and appearance.

VERSATILITY :

Compatible with surface mount standard LED packages.

INSTALLATION : PCB mountable with LED positioned at end of Light Pipe.

TECHNICAL SPECIFICATION : Material : Polycarbonate (Optical Grade)

TEMPERATURE RANGE : -40 C to + 100 C