X
View Mobile Number70% Response Rate
Hi
terms privacy policy
Verifying...
1

Have a requirement?
Chat with us

Hi
terms privacy policy
Verifying...
1

Have a requirement?
Chat with us

Products

+View All

Ultra Precision Hermetically Sealed

Owing to years of experience, we manufacture and supply a wide assortment of Ultra Precision Hermetically Sealed Resistors. These products are highly demanded by the clients for their availability in varied specifications. Moreover, one can get these products at industry leading prices.

Interested in this product?
Get Best Quote
We can manufacture the Networks & Voltage Dividersas per your needs in the hybrid format when it is not possible for technical reasons to manufacture it in the monolithic form. You can choose to have a hybrid with any combinations of monolithic resistors, thin film chip resistors and/or thick film high value chip resistors. The monolithic resistors will be made by patterning and trimming the NiCr film deposited on alumina substrate and the conducting traces formed by deposited copper.

View Complete Details

Yes, I am interested!

H-series Resistor

₹ 190/ PieceGet Latest Price

FEATURES

H-series (vha Series & Vhp 202) Resistor

H-Series (VHA Series & VHP 202)

• Temperature coefficient of resistance (TCR):

± 2 ppm/°C typical (- 55 °C to + 125 °C, + 25 °C

ref.). For ultra high performances

(instrumentation and metrology) please refer to

the last page

• Resistance range: 5 Ω to 1.84 MΩ (higher or

lower values of resistance available)

• Vishay Foil resistors are not restricted to standard values;

specific “as required” values can be supplied at no extra

cost or delivery (e.g. 1K2345 vs. 1K)

• Power rating: 0.3 W to 2.5 W at + 25 °C (depending on

model - see table 2)

• Tolerance: to ± 0.001 % (10 ppm)

• Load life stability to ± 0.002 % (20 ppm) at 25 °C, 2000 h

at rated power

• Load life stability can be considerably improved

through in-house stabilization

• Shelf life stability: ± 2 ppm for at least 6 years

(unaffected by humidity)

• Electrostatic discharge (ESD) up to 25 000 V

• Rise time: 1 ns effectively no ringing

• Thermal stabilization time < 1 s (nominal value achieved

within 10 ppm of steady state value)

• Current noise: 0.010 µVRMS/V of applied voltage (< - 40 dB)

• Thermal EMF: 0.05 µV/°C typical

• Voltage coefficient: < 0.1 ppm/V

• Non-inductive: < 0.08 µH

• Non-inductive, non-capacitive design

• Non hot spot design

• Terminal finish available: lead (Pb)-free or tin/lead alloy

• Impervious to harmful environments - oil-filled

• Compliant to RoHS directive 2002/95/EC

• Prototype quantities available in just 5 working days

or sooner.

• For better performances (values, TCR, tolerance, stability),

please see the HZ series

View Complete Details

Yes, I am interested!

    Feature

 

·         Temperature coefficient of resistance (TCR),

               absolute: ± 0.05 ppm/°C typical (0 °C to + 60 °C)

               ± 0.2 ppm/°C typical (- 55 °C to + 125 °C,

              + 25 °C ref.)

             TCR tracking: 0.1 ppm/°C typical

·         Tolerance: absolute and matching to 0.005 % (50 ppm)

·         Power coefficient tracking “R due to self heating”: 5 ppm

              at rated power

·         Power rating: 0.2 W at 70 °C, for the entire resistive

             element R1 and R2, divided proportionally between the two  values

·         Load life ratio stability: < 0.005 % (50 ppm) 0.2 W at 70 °C for 2000 h

·         Maximum working voltage: 200 V

·         Resistance range: 100R to 20K per resisitve element

·         Foil resistors are not restricted to standard values/ratios;

             Specific “as requested” values/ratios can be supplied at no

              extra cost or delivery (e.g. 1K2345 vs. 1K)

·          Electrostatic discharge (ESD) up to 25 000 V

·         Current noise: 0.010 µVRMS/V of applied voltage (< - 40 dB)

·         Thermal EMF: 0.05 µV/°C typical

·         Voltage coefficient: < 0.1 ppm/V

·         Non inductive: < 0.08 µH

·         Non hot spot design

·         Thermal stabilization time < 1 s (nominal value achieved

               within 10 ppm of steady state value)

·         Compliant to RoHS directive 2002/95/EC 

 

 

View Complete Details

Yes, I am interested!

FEATURES

• Temperature coefficient of resistance (TCR):

- 55 °C to + 125 °C, + 25 °C ref.:

VH102K: ± 1 ppm/°C typical

VHS102: ± 2 ppm/°C typical

VHS555: ± 5 ppm/°C maximum

• Tolerance: to ± 0.005 %

• Resistance range: 1 Ω to 150 kΩ (higher or lower

resistance values are available

• Load life stability: 0.005 % (70 °C for 2000 h at rated power)

• Electrostatic discharge (ESD) > 25 000 V

• Power rating: 0.6 W at + 70 °C; 0.3 W at + 125 °C

• Non inductive, non capacitive design

• Non hot spot design

• Rise time: 1.0 ns without ringing

• Current Noise: < - 40 dB

• Thermal EMF: 0.05 µV/°C typical

• Voltage coefficient: < 0.1 ppm/V

• Non inductive: < 0.08 µH

• Termal finishes available: lead (Pb)-free

tin/lead alloy

• Impervious to harmful environments - oil filled

• For better performance, please see VH102Z datasheet

 

View Complete Details

Yes, I am interested!

VHP3, VHP4, VPR247

Get Latest Price

FEATURES

• Temperature coefficient of resistance TCR:

± 2 ppm/°C typical (- 55 °C to + 125 °C,

+ 25 °C ref.) (see tables 1 and 2)

• Tolerance: to ± 0.01 % (see tables 1 and 2)

• Power rating (heat-sinked): 10 W

• Load life stability: ± 0.01 % at 25 °C, 2000 h at rated power

• Resistance range: 0.05 Ω to 80 kΩ

• Electrostatic discharge (ESD) above 25 000 V

• Non inductive, non capacitive design

• Rise time: 1.0 ns without ringing

• Current noise: < - 40 dB

• Thermal EMF: 0.05 µV/°C typical

• Voltage coefficient: < 0.1 ppm/V

• Non inductive: 0.08 µH

• Non hot spot design

• Terminal finishes available:

VHP-3 and VHP-4: lead (Pb)-free

tin/lead alloy

VPR247: gold plated

• Any value available within resistance range (e.g. 1K234)

• Prototype samples available from 48 h. For more

information,

• For better performances, please contact Application

Engineering

 

View Complete Details

Yes, I am interested!

Get in touch with us

Reach Us

Integrated Electronics Technology Private LimitedA-218, Road No. 16 V Wagle Industrial Area, Wagle, MIDC, Behind NITCO Biz Park, Thane West, Thane-400604, Maharashtra, India

Sujata Soparkar (Director)

View Mobile Number70% Call Response Rate

Send SMS
Send Email
Leave a Message, we will call you back!
Send your enquiry to this supplier
terms privacy policy
Tell us what you need, and we’ll help you get quotes
Tell us what you
need
Receive seller
details
Seal the deal
Pay with IndiaMART
Tell us what you need, and we’ll help you get quotes
terms privacy policy