Fittings are designed AS PER BS: 4368 to withstand high-pressure service and severe operation Conditions. They make safe joint, which hold tight beyond the bursting the bursting strength of the Tubing itself. They meet the severe requirements of the industry performance test on pressure, vibration, impulse, repeated assembly etc. Fittings are very e'asy to assemble because they require no threading, flaring, welding, soldering, only open wrench is needed

• Male Connector


• Female Connector


• Tube Union


• Male Run Tee


• Tube Cap


• Male Br.Tee


• Male Elbow


• Bulk Head Union


• Female Elbow


• Union Elbow


• Reducing Union


• Female Br.Tee


• Tube Plug

  Design : Double Ferrule Type & Single Ferrule Size Range : 1/16" Tube OD to 2" tube OD End Connection : ODT / NPT / BSP / SW / BW Material : SS316 / SS 304 /CS / Monel / Brass / NACE MR-01-75 Pressure Rating : 100 kg/cm2 TO 710 kg/cm2

These are available in floating ball designs that operates on low torque. The rugged body and floating ball of these valves are machined from base stock, while the integral ball steam is machined from one single piece and best suited to encapsulated ball seals. The maximum orifice of the valves minimizes the pressure drop. These have internally loaded steam with shoulder that prevent stern blowout.

Encapsulating ball seats are uniformly forced to form tight seals against ball and body cavity and virtually allow no dead volume. We also provide panel mountings if specified by our customers.

Our varied range of ball valves includes: 3 Way ball Valve Process, Ball Valve NPTF, Ball Valve ODT Ends, Ball Valve 3 piece Design, Flanged End Ball Valves and 3 Way Ball Valve ODT Ends.

Technical details:

• Design : These are available in various designs like One Piece and Three Piece
• Type : the various models of ball valves includes Two Way, Three Way, Four Way, & Line Mounting
• Size Range : the size of these ball valves ranges from 1/8' to 2' NB
• End Connection: NPT / BSP / SW / BW / and flanged as per BS-10.ASA and Din standards are the different end connections.
• Material: we use SS316 / SS 304 /CS / Brass with SS working parts to manufacture durable ball valves.
• Pressure Rating : our ball valves can withstand pressure ranging from 300 psig to 10000 psig

We design and manufacture stem, rotating type, non-roating type tip, and satellite filled tip type needle valves. These are available in forged or bar stock body construction. The back seating of the valves provide anti-blow out of stem. Straight or angle pattern with Integral Bonnel in one-piece body is available with optional Panel Mounting.

Technical details:

• Design : Our needle valves are available in various designs viz. Straight, Angle, Cross, Union Bonnet & Line Mounting
• Size Range : These are available in various sizes ranging from1/8" to 2"
• End Connection : NPT / BSP / SW / BW / ODT are the different end connections of the needle valves
• Material: We use SS316 / SS 304 /CS / Brass / Monel also available
  with nace MR-01.75 standard to manufacture needle valves.
• Pressure Rating : These can withstand variable pressure ranging from 5000 psig to 10,000 psig

We offer sturdy, accurate & durable manifold valves available in one piece forged body without welds. The low operating torque & fine screwed structure of these valves makes them accurate for instrumentation purpose. The safety bonnet block of the valves prevents accidental disassembly and provides safety. Various accessories available with manifold valves include flange, bold, 'O' ring and many more.

Technical details:

• Design : The various designs of manifold valves are Two way, Three way & five way Manifold straight & 'T' Type
• End Connection : NPT / Flange
• Material: We use SS 316 / SS 304 / CS Monel to manufacture durable manifold valves.
• Pressure Rating: These can withstand pressure upto 10,000 psig

We use superior quality of stainless steel, carbon steel, monel -400 to manufacture durable pipe fittings. Our corrosion resistant pipe fittings prevents leakage & thus increase safety & reliability of oil, gas or water pipe lines. Our wide range of pipe fittings comprises of hex long nipple, adaptor, round coupling, male plug, pipe union, hex coupling, elbow, pipe nipple, equal tee and reducing nipple.


Technical details

• Design : The pipe fittings are available in various designs viz.2000#, 3000#, 6000#, 9000#
• Size Range : We offer these fittings in various sizes ranging from1/8" to 2" NB
• End Connection: NPT / BSP / SW / BW are the different end connections.
• Material: We use SS316 / SS 304 /CS / Monel / Brass with also NACE MR-01-75 to manufacture pipe fittings.
• Pressure Rating: These can withstand variable pressure ranging from 3000 / 6000 / 9000 psig

We use premium quality of carbon steel, stainless steel and alloy steel to manufacture durable condensate pot. These pots are widely used in various industries to collect dirt & moisture that might impair the performance of instruments. Our condensate pots are corrosion resistant and chemical resistant equipment that are used in various industries.

We offer range of Air Headers that are suitable for use with variety of outlet take-off. These headers replace many unit valve assemblies, which would normally be operating from one source. The inlet-connection of these air headers are of flange or screwable type. A drain-valve is possible at the manifold exit.

We also supply bracket / U clamp for wall mounting of the air headers. We provide ¼" Brass Needle valves For CS Air Headers distribution ports. The SS316 / 304 Air Headers distribution ports are provided with ¼" SS 316 / 304  Needle / Ball valves. We provide NPT Threads as per ANSI B 2.1 specifications & Socket Weld as per ANSI B 16.11 specifications.

• M.O.C:  The air headers are manufactured from SS316 / SS304 / CS raw material.
• size: These are available in various sizes viz. 11/2" /  2"  -  SCH40 / SCH80
• Inlet: ANSI B 16.5, 150#   RF 1" NB Flange  /1" NPT (f) 3  PEICE UNION are the various inlet of our air headers.
• Outlet: ½" NPT (F) , SS316 / SS304  BALL VALVE WITH ½" NPT(M) PLUG are the different outlets of the air headers.
• Distribution ports: 6 / 8 / 10 / 12 / 16 are the types of various distribution ports available in sizes -¼" / ½".

We design and offer durable gate valves that are manufactured from qualitative raw material. These valves are available in full bore designs that provide an uninterrupted flow path. Our gates valves are designed to operated in various modes like fully open or closed, for on/off isolation.

We design and offer globe valves in different patterns like straight patterns, angle patterns, oblique patterns and needle designs with a large variety of internal seat construction variants. These are manufactured from qualitative raw material and are used for flow control or on/off isolation of fluids.

We manufacture durable thermowell unit from stainless steel in conjunction with Stationary Sensor, Stationary Striker Sensor, or Exhaust Gas Temperature Sensor. Our Thermowell unit houses the fuse-metal end of the device that enables them to be widely used in extreme conditions where temperature of oil, water, gas or other elements is to be monitored. These are used as fuel gas headers, oil sumps, water systems and natural gas headers.

Gauge Snubbers fittings protects pressure gauges and instruments from system pressure surges and shock. Pressure damping (snubbing) is accomplished through the use of a porous sintered SS 316 Element

Check valves manufacturer and supplier of check valves products from India.SIZES 1/8" TO 1" NB / NPT / BSP ETC IN SS 316 / 304 / C.S ETC