We manufacture the reverse osmosis plants wherein reverse osmosis takes place, i. e, due to high pressure the direction of flow of water gets reversed through the semi permeable membrane. This results in the production of pure water free of excess salts, known as the R.O process. High pressure is built in the R.O module and this is the reason the extra salts get deposited here and permeate from the module gets blended with the filtered water to obtain the desired TDS. The feed water is pre-treated to remove elements that would otherwise block the membranes. The quality of water that reaches the end user is dependant on the pressure, concentration of salts and the salt that gets filtered through the membranes. Following is the available range and application areas for the same:
 
Range:

From 250 LPH to 1, 00,000 LPH
 
Application:

• Drinking water treatment
• Mineral water plants,
• Sewage water recycling
• Effluent recycling
• Municipal water supply
• Zero liquid discharge systems
• All other industries where required

Our range of effluent treatment plants addresses to the needs of varied industries such as chemical, tanneries, pigment & dyeing, where there is a dire need to treat the effluents in removing the color in addition to TDS, COD, BOD and others. We are supplying our plants to cater to the demands of small scale industrial water treatment units, municipal water treatment and wastewater treatment plants of more than fifty countries. Technologies developed in-house include production of process water, boiler feed water, industrial effluent treatment, municipal wastewater treatment, bio-solids, sludge recycling and reuse of wastewater. We use advanced technologies like Aeration, Reverse osmosis, Nano Filtration, Ultra filtration and evaporation systems to remove the harmful elements present in the effluent discharged from various process industries. The plant is used in the following areas to create an unpolluted and eco friendly environment. The quality achieved from the plants conforms to the standards set by the Pollution Control Board.
 
Application:

• Activated Sludge process
• Re-activated Sludge process
• Anaerobic Systems
• Aerobic Systems
• Recycle Systems & Tertiary Treatment Plants
• Physico Chemical Treatment Systems
• Clarifiers
• Clariflocculators
• Agitators and Aeration Systems

We supply premium quality sewage treatment plants wherein the process of removing contaminants from effluents takes place in the most effective manner. The sewage is settled to remove the complex/solid wastes, after which the waste is biologically treated in the oxidizing bed to reduce the level of BOD and COD.

The plant ensures that the final effluent is 95% clean and can be used for irrigation, groundwater recharge or land drainage system.

Our zero discharge plant helps to improve the purity water from a wide variety of waste and toxic effluents for numerous in-plant uses. Usually treated effluents release high level of BOD, COD, SS, and TDS with black colored and odor, harmful for the water bodies. Our range is an answer to such problems that works towards reducing the BOD and pollution level. Our professionals make use of their experience and technological expertise to custom design a system for higher operational efficiency. The systems reduce the liquid waste stream from the processing plants and recycle high purity water for re-usage. Our system is designed after considering the following problems faced in recycling of pure water :

• Serious Foaming
• Scale formation
• Frequent shut down and restarting of the system
• Requirement of large quantity of steam due to restarting and poor design of evaporator

We manufacture well precision filtration systems used for the separation of varied fluids and ions or desired components from the undesirable ones. The system consists of membranes with pore sizes between the ranges of 0.1 to 0.001 micron. It functions effectively to eliminate colloidal materials, organic & inorganic polymeric molecules, bacteria, proteins, dyes and other constituents that have a larger molecular weight of greater than 10,000 daltons. The functioning of the system is dependant upon the charge and size of the particle. Following I the available range and application area for the same:
 
Range:

From 250 LPH to 5, 00,000 LPH
 
Application:

• Drinking water treatment
• Mineral water plants
• Sewage water recycling
• Effluent recycling
• Municipal water supply
• Zero liquid discharge systems
• All other industries where required

We offer an effective filtration system which uses partially permeable membranes to separate varied fluids or ions. Not as efficient as the reverse osmosis plant, yet it requires equal energy to perform its function. The membrane pores of the nano filters are bigger than the ones in the reverse osmosis plant. Following is the range and application area of our nano filters:
 
Range:

From 500 LPH to 1, 00,000 LPH
 
Application:

• Salt Recovery plants
• Dyeing & Bleaching Industries
• Paper and Pulp Industries
• Sewage water recycling
• Effluent Recycling
• Zero liquid discharge systems
• And All other Industries where required

  We IONICS ENVIRONMENTAL SOLUTIONS have developed a prefabricated hybrid sewage & waste water treatment plant both aerobic & anaerobic process. The technical details are explained in the attachment file. The main advantages are
 
Ø      Compact
Ø      Odorless
Ø      Low power
Ø      Easy maintenance
Ø      Quick installation
Ø      Less civil work involved
Ø      Reduced operational noise
Ø      Flexible in reworking.
Ø      Negligible sludge generation
 
  This plant employs techniques like high rate clarifier coagulation and precipitation with special polymer , self aerating bioprocessors ,bio media clarification thus augmenting for better efficiency and reliability. Equipments are made of high grade FRP resulting in high potency with lesser weight and flexible in reworking.
        
The output of this plant satisfies all parameters of pollution control Board.

Preamble.
 
     Treated waste water is perceived as potential aid valuable resources. Highly treated waster water with advance scientific technique can be used in different sectors of activity such as irrigation for landscape, floor washing, toilet flush and partially recycle for back for process. These reduces considerable load on water resources.
 
     Keeping this in perspective “IONICS ENVIRONMENTAL SOLUTIONS.” have decided to develop Pre-fabricated packaged waste water treatment plants for  treating sewage & wash water(gray water) . Since, non availability of space to accommodate treatment plant in existing building was a challenging proposition. With the limitation of space, design of compact, light weight  treatment plant have been developed. Introduction of various innovative technique i.e. High rate clarifier, coagulation precipitation with special polymer, Self aerating Biowheel-attached growth process , bacterial augmentation with enzymes and bio-media clarification have made treatment plant compact and reduced volume required for treatment. The emphasis has been given to reduced electrical power consumptions and operation cost.
 
 A detail physical – chemical treatibility studies has been carried out with organic polymer and reduced inorganic chemical  for various types of sewage/gray water. A complete treatment scheme has been designed on the basis of treatibility studies. The scheme is presented  as flow chart, describes the size and dimensions of all the components of treatment plant .

Looking at the increasing demand for a device that would eradicate solid waste before reaching the bio-filter, we offer our high end clients with a supreme range of Pre-filters or water filters that are set before the water enters the tap or the water ionizer. The filters come with the following features:

• Easy to clean
• Require low maintenance
• Easy installation
• Easy accessibility to internals
• Offers pure and healthy water

We offer a supreme range of ultra violet sterilizers manufactured using Teflon/FEP parts implying nil contamination. We have preferred Teflon to stainless steel as steel brings oxides into pure water and Teflon/FEP forms a part of fluorocarbon materials that is reliable and sturdy. The Teflon made sterilizer contains a strong UV field which results in 99.9% destruction of microorganisms.

High turbulence and non-soaking surface characteristics of Teflon eradicate the increase of harmful elements and contaminants that might result in blocking the UV rays.

We offer a high quality gamut of micron cartridge filters that forms a basic requirement of end filters to get pure and healthy drinking water acquired by filtration through conventional sand filter. Fine suspended dirt, colloidal matter, chlorine traces sand elements and others that dos not get filtered in sand filters get separated when passed through the micron cartridge.

It finds wide usage across an assortment of industries for undertaking research activities in laboratories, hospitals marine & microbiological research organizations helping to attain higher standards of quality.

Our range of ozone generator, also referred to as oxygen
feed systems, is compact designed and highly efficient in producing high concentration of ozone. It finds wide application for industrial as well as personal use. The generators feature the following attributes:

• Patented corona discharge electrode
  
• High ozone concentrations
  
• Stable ozone production
  
• Easy maintenance and service
  
• Low energy consumption
  
• Light weight and compact design
  
• Several safety features to protect from out-of-spec operating conditions
  
• Over-heating thermal cut-out
  
• Low feed gas cut-out
  

We make sure in offering pure and crystal clear drinking water through our range of packaged drinking water available in pet bottles and bubble tops in various capacities.

Also we make sure that we conform to the established industry standards.