DESCRIPTION

Bar banding Machine Model No. B/B-32 Mechanical Unit with Push Button Operation Portable Type with Towing Arrangement (Pushing) Capacity 32mm Dia with Square Bending (Automatic & Manual Operate) with Foot Paddle Operation. Motor Capacity 3 PH 5 Hp with Assembles Break fitted.

1.     Branded Company Panel Board.
2.     Designed to International Standard.
3.     Easy Availability of Spare Parts.
4.     Heavy Duty Gear Box with Oil Bath.
5.    Automatic Stop, If any Electric Fault.
6.    Emergency Stop Push Button, If any Mechanical Fault.

Description

• Bar Cutting Machine Mechenical Unit with foot & hand operated.
• Motor capacity 5 Rw.
• Machine Cutting Capacity 8mm - 42mm
• Heavy Cutting blade with 8 Edges. Cut off time 32 times in a minute. Machine Weight 600 Kg. Designed to International Standard.
• Bar Cutting Machine are ideally suitable for large    production. It's maintenance is low cost easily repairing on site.

DESCRIPTION

• Bar Threading Machine with Mechanical Unit with Hand Operated.
• Motor Capacity 5 HP with Couple Pump Machine threading Capacity 16 mm to 40 mm (160 mm length of threading)
• Heavy Cutting Blade
• Machine Weight 300 Kg. (Change for Models)
• These are capable of threading several tons of TMT/TOR &teel every day without any trouble.
• 10 Lit. cutting oil capacity.

MODEL JC-4OO/85O

Jib Working : 7.5 FEET / same
Load Capacity : 400 Kg. / 850
Movement : 360° / same
Base Space : 10 x 5 / same
Stand High :  5.5    / same
Boom Length : 12    / same
Jib Pipe : MS 40 m7 50mm
Motor : 5 H.P. With brake / 7.5 HP
Gear Box : Reduction / Heavy Reduction

Earth Compector

Vibration plate machine used in a kind of basic road, public square and repairing pressure and soiled, concrete road, especially it ramming effect very good such as on sand field, crushed stone.

The product is has characteristic at design reasonable, surface
beautiful,  ramming depth bigger, works steadily, uniformity of
operation and efficiency high and so on.
(Description can be change according to model/Work)

Tamping Rammer (Motorised)

Electrical vibration impact hang machine that it used in building, road surface, yard place, basic road, brige pile, trench, suburb and narrow field, it is complection to fine on working better then large and middle machine is not working. The product design advanced, The structure is reasonable, safe operating, ramming strength strong, scope widely,
efficiency high and so on.

(Description can be change according to model/Work)
1. Motorised
2. Diesel Engine

Modal Roller   

Engine :    Diesel
Power  :  5.5 Kw
Weight  :   600 Kg
Coveradi :   24" Core
Compretion :   30 Ton

This  machine adopts  many pate  technology reasonable structure Small Operating and noise, easy to maintainment Working stable no need to debugging and cutting eee small. You can use at directly after elected,
l. Straightening steel bar diameter: 4-12 mm
2. Wire draught speed: 4O-45m/min
3. Wire design length: 3O-8OOcm (can increase)
4.Cutting length error: _lcm
5. Motor power: draught voltage : 380V 4Grade_4KW Straighten voltage : 380V 4 grade -4KW
Cutting voltage : 380V , 4grade-1.5KW
6.  Dimension : 187x89Oxl3OOmm
7.  NW: 900KG, GW1000KG

DESCRIPTION

1. Bar Cutting Machine with Mechanical Unit with Gear Lever.
2. Motor Capacity 7.5 HP with 3 V belt Starter.
3. Machine Cutting Capacity
8 mm to 36 mm (1x36) mm,
1x32 m.m. 1x28 m.m. 2x25 m.m.
3x20 m.m. 5x16 m.m. 10x12 m.m.
12x10 m.m. 14x8 m.m.
4. Heavy Cutting Blade with 4 Edged, Size 95x75x25
5. Machine Weight 600 Kg. (Change for Models)
Bar Cutting Machine are Ideally suitable for large
production.
6. These are capable of cutting several tons
of TMT/TOR Steel every day without any trouble.
It's Maintenance is Low Cost, Easily Repairing on site.
Machine Cover for Safety reason