Iwave Systems Technologies Private Limited

iW-Rugged PDA, a companion in the rugged environment assure portability. This integrated modular design saves Time to Market and design cost by providing customization for wide spectrum of applications in the field of Industrial, defense, Automotive, etc.

This MIL grade PDA meets the MIL-STD-810F standard and 461E spec [461 EMI, EMC] for drops, vibration and temperature extremes, water and dust proof. These PDAs are designed for day-to-day operation in extreme outdoor and industrial environment.

Specifications:

  PXA270@520MHz

  64 MB Nor Flash

  128 MB

  RS-232 2 Nos

  USB Device1.1 1 No

  20 keys

  Rechargeable Li-ion battery(7.4 V,1.7Ah)

SD interface(internal)

  SD memory card slot 1 No

  4 pin connector for power input

  14 pin connector for RS232, USB device1.1 & Audio Out Interface

  WinCE 5.0

  810E environmental specification

  810F environmental specification

  416E specs(416 EMI, EMC)

  Color LCD 3.5" QVGA Display with Touch Screen Interface

  LCD protection lid.

iW-SDIO WLAN Module helps the peripheral card vendors, device OEMs and ODMs in developing solutions independently, minimizing costs and mitigating the risks involved in developing an SD/SDIO Bus Driver architecture from scratch.

Specification:

• Interface: Support SDIO 1.0
• Frequency: Fully integrated, 2.4 to 2.5Ghz band direct conversion transceiver
• IEEE802.11b/g Complaint
• 802.11j channel (Japan) supported
• 802.11i (AES, WEP and TKIP) compliant
• 802.11h (DFS/TPC) supported
• AES (128 bits/CCMP mode) supported
• WEP (64/128 bits) supported
• DSSS: DBPSK, DQPSK, CCK Modulation
• OFDM: BPSK, QPSK, 16QAM, 64QAM Modulation
• Data rates: 1, 2, 5.5, 11, 6, 9, 12, 18, 24, 36, 48, 54Mbps
• Sensitivity: -88dBm 11Mbps sensitivity and -73dBm 54Mbps sensitivity
• Operating Channels: 1~14 channels
• OS Support: Linux2.6.x, Win CE 5.0
• Dimension: 50x24mm

Applications:

• 2G/2.5G/3G cellular phone
• Digital camera
• PDA
• MP3 player

Advantages:

• Saves on investment required for any additional software engineering efforts
• Enable addition of SD/SDIO card support to embedded devices with minimal effort and time

• Code re-use

iWave has come out with three different versions, with varying features of Digital signage setups. By connecting a display with this setup, it can be used for the various digital signage applications like

• For all kind of advertising applications
• Digital photo frame/signage
• Medical applications
• Teaching purpose in education institutions
• Corporate presentations

• Digital Poster
• Connected Digital Signage - SD
• Connected Digital Signage - HD

iWave’s FPGA based Digital signage platform is a low cost/small Form Factor Digital Signage solution based on FPGA. Images stored in Micro SD card or NAND Flash can be displayed in LCD Monitor with VGA Interface, resolution up to 1280 x 720.

Features Overview:

• Resolution: 1280 x 270
• Storage Medium: Nand Flash / Micro SD
• Image Format: bmp
• Power Consumption: <2 watts
• Content Update: Manual

This Wi-Fi enabled Digital Signage Box can drive LCD TVs like...36'/40'/42'/46'.. For such application, peoples are using computers/laptops. As we all know, the computers are bulk in size and consumes more power.. In Digital Signage Application Systems, we can replace the conventional Computers / Laptops with our iWave's Wi-Fi enabled Box which is very small in size and consumes very less power and is a cost effective solution. This is a small iWave's contribution for Green Computing.

Features Overview:

• Resolution: 800 x 600
• Storage Medium: SD / USB
• Image Format: bmp
• Video Format: H.264, mpeg...mpeg4
• Power Consumption: <4 watts
• Content Update: Online / Manual

Features Overview:

• Resolution: 1920 x 1080p
• Storage Medium: SD / USB / HDD
• Image Format: Any
• Video Format: Any
• Power Consumption: <7watts
• Content Update: Online / Manual