Designed in accordance to international quality standards, we are also one of the few established names, to manufacture concrete cutters. Having high performance level and efficiency to work for long hours, we offer concrete cutters in various model numbers with following specifications:
Designed to meet customer's expectation and sustain every climatic condition, we also provide concrete mixers, in various model numbers, like: Concrete Mixer 14x10JF-867 Drum: Constructed of rolled steel plate and steel end plates, they are welded together with machined roller path. It is also provided with a central cast iron gear ring, which is is fitted in segments. Strip: Designed to give a steep angle of feed, a shaker is is fitted to assist the discharge. Transmission: This mixer is also fitted with encased bushed roller chain with cuts prokets, which directly drives transmission on the drive shaft. In the drum roller assembly each roller is mounted with renewable bearings. Concrete Mixer 10x7JJ-868 Specification: Chassis: Made of heavy steel sections, it also contains four M.S. or C.I. Wheels. Power Unit: It contains 1.5H.P. Diesal Engine or 2.5H.P. Electric Motor with Starter. Transmission: For transmission purpose, we make the best use of Gun metal bushes & rollers chains. Mixering Drum: It has the more capacity which allows a guaranteed 15% overload and is provided with specially shaped mixing blades for efficient mixing Pan Mixer-7/5 CU.FT.JD-912: This is a portable as well as stationary type with standard size 41/2' diameter and capacity 7/5 cu. ft. It is provided with special engine guard, discharge chute and 4 M.S. road wheels. Power Unit: 5 H.P.Diesal Engine or 5 H.P.Electric Motor with Starter.
We manufacture quality concrete pumps, in various models like:
Concrete Pump Model M15: A multi purposes pump with number of advantages. Featured with high pressure it can be used for plastering, grouting and pumping concrete @ 15m3 hr.
Concrete Pump Model M45: With a capacity of 54M3/hr, this pump can place the concrete at a dist of height 80 Mtrs and horizontal distance of 300 Mtrs. Mounted on a framed chassis with pneumatic tyres for mobility, this equipment is also featured with an additional tyre that makes it easy to move.
Short creting pump: A multi purposes pump and can be used for plastering, grouting and pumping concrete at @ 15m3 hr. The pump is mounted on a strong framed chassis with air tyres for mobility on site at 25Km/hr Designed to work for long hours, specifications, that differentiate them from others are
We also fabricate concrete vibrators, in various models like: Concrete Vibrator JSD-MK 7/54, JT-MK 7/101, JG-MK 7/255: Designed to suit all types of conditions, it has high frequency of 17,000vib/minensures and has perfect homogeneous compaction of concrete mixture of different grades.
Specifications: Size:
Needle: 25mm,40mm, 60mm diameter
Flexible shaft: 4m. or 6m. in length.
Vibrating Needle: It consists of specially treated steel components and works on the principle of friction, where a pendulum type rotor arrangement is provided in it.
Flexible Shaft:
Frequency: 3,500 to 4.000 vib/min.
Capacity: Slabs of width up to 7mx254mm deep can be effectively compacted.
Vibrating Unit: It consists of mid steel casing in which the vibrating rotor and it's bearing are carried. This unit contains two offset fabricated mild steel brackets which are secured by through bolts to the trailing side of the board.
Handles and Return Rollers: Special rollers and shock absorbing handles are provided for the smooth and easy handling of the equipment. 4.Shutter Vibrator: JB-782: It is self contained unit and can be put straight in to service by simply connecting it to an A.C supply. Robustly constructed, this unit is capable of standing up to very severe conditions of service.
It has an outer hose of reinforcement rubber and a steel inner cre of high strength.
Surface(inclined)Vibrator:JR-MK 7/270: This pioneer product is specially designed for giving excellent finish (by compaction) to inclined concrete surfaces like side structures of canal, dams, reservoirs. It can be easily converted in to concrete vibrator or flexible grinder on site whenever required.
Surface(screed)Vibrator JD-MK11/531: With an aspire to go beyond the expectation of our customer in terms of quality, we also manufacture surface screed vibrator, having following specifications
Empowered with quality management team to supervise the quality of the products, we manufacture premium quality scarifier. This is the latest in grinding technology for removing all types of coatings, stains, contamination and flooring imperfections. It is a ideal machine for preparing industrial floors to take epoxy or other toppings. This unit is widely used in construction and renovation applications, like:
Grinding of new concrete surface which becomes dirty or oily during work
Grinding of defective, solid or only concrete and screed floors.
Correction and leveling of concrete and screed sections of different heights.
Preparation of concrete and screed substrate for subsequent impregnation and coating.
Features:
Vacuum attachment, lifting sling, safety switch.
7.5 KW, 440 w motor, Weight 350 Kg.
Working width 300mm.
Output : 50 m2/hr.
Handwheel for precise grinding depth.
Two speed forward and reverse transmission.
High performance octagonal carbide tipped cutters.
Functions:
Concrete and screed grinding machines.
Variable grinding width of up to 300mm by more / less cutter and spacers.
Dust free operation by encapsulated grinding rotor in connection industrial vacuum unit.
Dhanvanthri Engineers Pvt. Ltd Supplier & manufacturer of industrial conveyors, building & construction machinery, equipment & tools. Also offers chain driven conveyors, turn-key conveying systems, overhead type chain conveyors, magnetic belt conveyors and belt conveyors.
Acquavir International Exporting and manufacturing concrete mixers such as laboratory concrete mixers, crushing machines, mobile concrete mixers, precision mobile concrete mixers, mortar mixers and laboratory pulverizers.
Processing...
