Copper Cakes / Billets is Forged / Hot Rolled and machined to the required dimension. The products can be further worked upon as per drawing given by the customers. General Properties Material with minimum copper content of 99.9% as per IS-191 & IS 1897. Size: Width - 100 mm to 650 mm Thickness - Upto 100 mm Weight per pc. - 500 kg. Field of Application Zinc Refineries, Arc / Induction Furnace manufacturers, Calcium Carbide Industries, Ferrous Alloys Units, Steel Plants etc.

Such connectors are manufactured by copper. It consists of several stacked strips with riveted or welded contact areas. They have a constant cross-section over the whole length. Bus bars connectors with the same cross section can be loaded with the same current. A part of connectors are utilized as flexible expansion connectors in order to connect busbars or busbars with switch gears, transformers, generators etc. Thanks to their elasticity thermal expansion of bus bars is being compensated. Most of the parts are used as expansion connectors to prevent damages by vibration caused by switch gear operations. Another part is utilized as flexible components inside parts of machines (e.g. welding machines) or switch gears. These kind of connectors have to realize movements inside machines and switch gears. Press-welded design Electro-beam-welded design Fusion-welding or soldered design Press riveted design Additionally to our manufacturing of flexible connectors we are developing suitable connectors in co-operation with user companies.

Copper Wire Bar / Cakes are forged / hot rolled and cold worked to the required dimension. The products are available in Hard, Half-Hard and Soft condition. General Properties Material with minimum Copper Content of 99.9% as per IS191 & IS1897Copper silver / copper nickel Size Width : 5mm to 350mm.Thickness: 1mm to 60mm.Edge: Square Edge, Radius Edge, Full Radius Edge Length: Up to 6400mm (21`) (depending on section) with standard overall cutting tolerance of 100mm. Surface Treatment Our Flat Bars can be Electroplated with Tin or Silver. Fields of Application Bus Bars, Transformer Connectors, Earthing Protection in L.T. and H.T. Electrical Panels, Power Transmission equipment, Control Panels etc.

These connectors have been developed specifically for the electrical distribution industry & are used extensively by generator & switchgear manufacturers. They are also used as expansion joints between solid Bus Bar arrangements. This heavy duty, high specification connectors have a current carrying capacity of up to 3500 amps. Multi-laying braids either on top of each other or side by side can increase the current carrying capacity.

Flexible Bus Bar is manufactured by Copper Strip. They consist of several stacked strips with riveted or welded contact areas. They have a uniform cross-section over the entire length. The high flexibility offers the installation into difficult equipment or small places. General Properties Material with minimum copper contact of 99.9% as per IS-191. Size: As per customer`s specification Field of Application Welding Machines, Switch Gears, Furnace and Transformer.

Copper Strips find many applications as Electrical Conductors, Switch Terminals, Hardware used in Electrical Circuits, Electrical Contacts. The products are available in Hard, Half-hard and Soft condition. General Properties: Material with minimum Copper content of 99.9% as per IS 191 Size: Width 3 mm to 180 mm Thickness o.25 mm to 10 mm.

Copper Wire Bar are Forged / Hot Rolled / Extruded and Cold worked to the required dimension. The products are available in hard, Half-Hard and Soft condition. General Properties Material with minimum copper content of 99.9% as per IS-191. Size: 12mm to 160mm dia. in shape of Round, Hex and Square.

Copper Wire Rods are drawn down to thick (8 - 1 mm), medium (1 - 0.40 mm), Fine and Superfine (0.40 - 0.05 mm) diameters. Depending on demand, wires can be produced as Tin coated, bare, hard or annealed. General Properties Material with minimum copper content 99.95% Size - 8 mm to 0.05 mm diameter. Fields of Application Winding Wire, Cables, Transformers, Telecommunication, Railways etc.

Flexible connectors combine maximum conductivity & minimum voltage drop, without loss of flexibility in the braid. Copper tube is used for terminals, which are compressed onto the braid without altering the braid size.

Flat Copper Wire is drawn from round inlets in single operation, through a Roll-Draw unit. The round input is flattened in two stands of flattening rolls, with one edger in between and finally drawn through T.C. die having correct profile. The drawn strip is annealed at the vacuum annealing unit in protective gas atmosphere. General Properties Material with minimum copper content 99.95% as per IS-191 & IS-6160.Cross Section max. 120 mm²Width: Between 3 to 160 mm. Thickness: Between 1 to 10 mm. Fields of Application Bus Bars, transformer Windings, Motor Commutators, Trolley Wires etc.

Product Description · Single and double cotton covered Round / Rectangular conductor as per IS 7391. · Double / Triple and Multiple paper covered Round / Rectangular Conductor as per IS 7404. · Varnish bonded Double glass fibre (yarn) covered braided. As per IS 6181 & IS 4685 · Nomex covered Round / Rectangular conductor. These conductors are required by the manufacturers of transformers, HT Motors, Alternators, Electromagnets, Welding Machine, etc. General Properties Material with minimum copper content of 99.9% as per IS-191. Size: As per customer`s requirement.

Forged Copper Clamp is a recent development and is substituting Brass Contact Pad. These clamps are far superior and cost effective than the clamps made of Brass. Clamp is forged, the grain structure is compact, it is leak proof and is free of blowholes. The surface of the clamp is machined resulting in better surface contact with electrodes. General Properties Material with minimum copper content of 99.9% as per IS-191. Size: As per customer`s specifications. Field of Application Calcium Carbide Unit; Ferrous Alloys Industries; Alloy Steel Plant etc