We have for our client commercial wet & dry grinders that have hardened as  well as fully machined & balanced beaters. These grinders are popular for  continuous crushing and suitable for wet-pulpy and dry crushing. Offered in  compact size these machines do not require too much space.

Our commercial wet and dry grinders are used for grinding different types of  product like spices, fresh ginger, salt, garlic, sugar, fresh fruits, vegetables,  beetle nuts, leaves, oil cake, cattle and poultry feeds, icing sugar, costarred  powder, instant food, food colors and allied food production.

The differentstandard accessories available with us are:

• Set of 7 perforated round hole screens are supplied with the machine
• 3-meter cable with plug with miniature circuit breaker along with
•  ampere meter will be fitted for overload protection for motor
• One filter
• One brush for cleaning of machine

Model No Jas 1102 Jas 1103
Chamber Size 8 “ X 4” 8” X 8 “
Motor H.P.( KW) 1 ( 0.75 KW) 2 (1.50 KW)
RPM 2880 2880
Size of machine
approximate
56 X 32 X 77 CM
46 Kg.
62 X 32X 77 CM
65 KGs. Approx

Operations: -

The flow of material from the Feeding Hopper is regulated by means of side handle easily to suit the load.

Rotor with four cutters runs in anti-clockwise direction. The beaters pass just beneath the Ratchet Teeth Liner fitted inside the top half of the crushing chamber, leaving a gap of 1/8" between the liner teeth and the tips of the rotating beaters. This cuts the material caught between the liner teeth like a sword with a scissors action at a  high speed of 2880 rotations per minute.

After the required size reduction, the material will pass through the  screen fitted inside the lower discharge end of the grinding chamber. No sieving is required, as the appropriate  size screen fitted will not allow coarser material to pass through. The air generated in the crushing chamber  forces the powder to pass through the screen fitted at the bottom discharge end of the crushing chamber, into a Filter attached to the delivery trough below.

(When crushing Wet-Pulpy materials, the balloon should not be  used)

Open the cover of chamber all grinding parts cleaned with a brush in couple of minute and the Pulverizer is ready for next crushing. If required, the grinding chamber can also be washed with water. Remove the cotton balloon and the screen, close the cover tightly and start the grinder. Now pour a bucket or two of water into the hopper. The grinding parts will be flushed with the water and cleaned. Continue running the machine for a few more minutes as the draft of the fresh air sucked into the grinder will dry it. The beater when worm out removed and reserved by removing the cur clip lock holding to the rotor pins. When both the edges are worm out, they are sharpened on an emery stone, to be used as new.

We manufacture and export gravy making pulverizers. Salient Features:

• Beaters are hardened & fully machined & balanced.
• Effective and Continuous crushing, leading to increased production and faster return on investments.
• Suitable for Wet-Pulpy and Dry crushing
• Compact Size. (Length 56 C.M., Width 38 C.M., Height 69 C.M.)
• Dust free operation. No wastage of product and no pollution hazards.
• The Wet cum dry grinder grinds almost all Spices, green chilies, fresh ginger, garlic, salt, sugar, coffee, fresh fruits, fruit pulp, vegetables, tobacco, herbs, beetle nuts, herbs roots, leaves, bark of trees, oil cake, cattle and poultry feeds, icing sugar, custard powder, instant food, food colors and allied food production.
  

Standard Accessories for gravy making pulverizers includes:

• A set of 3 Nos. perforated round hole screens are supplied with the machine
• 3-meter cable with plug with M.C.B. Along with ampere meter will be fitted for overload
• protection for motor.
• 1 No. Brush for cleaning of machine
• 1 H.P. X 2880 R.P.M. electric motors

Our vegetable cutting machines are technically advanced and are used for cutting different kinds of vegetables, cheese, fruits, cheese and other food items. The different types of vegetable cutting machines have the facility of automatic feeding & discharge which in turn saves time. These machines have tubular feed-throat that is used to cut different long shaped vegetables. These machines come with various contacting parts that is made of stainless steel and aluminum that is completely hygienic. The shafts, discs, blades and bushings are made using stainless steel that is easy to clean and hence hygienic.

Our vegetable cutting machines are used in cutting vertical mode pieces, slice, finger chips, cucumbers, salad and many other items.

• Can cut up to 6 mm to 30 mm
• Capacity: 100 Kg. to 150 Kg. vegetable cuts in one hour.
• Motor: 1 H.P. Single Phase or three phase
• Size length: 17 Inch Width: 12 Inch Height: 19 Inch

We have for our clients our semi automatic chappati making machines that come with the following features:

• Stainless steel body
• Stopper adjustment to make papad size
• Production can be increased by limit switch
• Continuous production per shift and faster return on investment
• Compact design. Occupies very little space
• A minimized power consummation by the way of friction loses.
• Low noise operation. No wastage of product and no pollution hazards
• Very easy operation, Requires No Skilled Labor
• Durable long life. Saves on recurring costs
• Machine is working by pressing foot, so hands are free for works.

The standards accessories offered with these semi automatic chappati making machines are :

• Thermostatic control.
• 16 Amp. Plug top.

We have for our clients a wide range of commercial mixtures & grinder machines that have high quality tipped stainless steel blades. These mixture grinders are use for mincing, pulping, dry grinding and wet grinding. These mixture grinders are low power consuming and have high speed.

The high performance of the machines helps us in saving time and thus satisfies the increasing demands of the clients across the globe. The different contacting parts of our mixture grinders are making from stainless steel and aluminum.

The different parts of the machines include stainless steel made bearing stainless steel blades and grids. The commercial mixture grinder is use for dry grinding of soaked rice, dry red chili, pepper, roasted coffee seed, sugar and other products. The wet grinding is carry on different types of food products like rice, black gram, cashew nut, dal, red chili, coconut, Masala for curry. The standard accessories that are offered with our commercial mixture grinders are:

• 15 Amp. Plug Top along with miniature circuit breaker fitted for overload protection for motor
• Single phase electric motor
• Please note we can supply mixture grinder
• Model No JAS-1019 (I )
• Jas-1002 (II) Jas-1002 (I ) Jas-1001
• Motor (HP) 1.5 1 ½ ½
• Jars of Mixture
• Single Stainless Folding Jar
• Single Aluminum Folding Jar
• Single Aluminum Jar along with two numbers Plastic Jar
• Drive Coupling type A section v belt drive
• A section v belt drive
• A section v belt drive
• Machine’s Length: 23” Inch 21” Inch 18” Inch
• Machine’s Width: 9” Inch 9.5” Inch 9.5” Inch
• Machine’s Height: 24 Inch, 34 Inch, 28 Inch, 25 Inch

Available in 110 single Phase & 220 Three Phase Volts model for USA & Canada.

We offer electric stirrer which comes in various specifications:

Model	10 Liter	20 Liter	40 Liter	60 Liter
Volts	170 To 250	170 To 250	170 To 250	170 To 250
H.P.	0.08	0.093	0.012	0.16
Capacity	5 Ltr.Water+ 5Kg. Curd	10 Ltr.Water+ 10Kg. Curd	20 Ltr.Water+ 20Kg. Curd	30 Ltr.Water+ 30Kg. Curd
Power consumption	60 Watt	70 Watt	90 Watt	120 Watt

Model	100 Liter	150 Liter	200 Liter	500 Liter
Volts	170 To 250	170 To 250	170 To 250	170 To 250
H.P.	0.25	0.50	1	2
Capacity	50 Ltr.Water+ 50Kg.Curd	75 Ltr.Water+ 75Kg.Curd	100Ltr.Water +100Kg. Curd	250Ltr.Water +250Kg. Curd
Power consumption	250 Watt	500 Watt	1000 Watt	2000 Watt

We design and manufacture domestic flour mills that is offered in the following specifications:

Motor	1HP, 2800 RPM, Single Phase, 750W
Power Supply	15 AMPS
Weight	55 Kg (Approx)
Dimension	Length 56cm, Width 38cm, Height 74cm
Cabinet	Strong & elegant cabinet of new wood & teak wood available in any attractive Freeze colors.
Electric Consumption	1 unit per hour (Approx)
Accessory	PVC Micro Filter, Pressurized squeezing blade, 8 pics. Perforated screen set of different mass size, S.S. Container for filling powder, Brush for cleaning.
Extra Specification	Efficient air cooling system, Auto/self cleaning system, Only one switch on, Auto start, Auto grind & auto stop.

We have for our clients a wide range of table top flour mills that is trusted for highly effective as well as continuous crushing. Ideal for dry crushing, these table top flour mills is helpful in increased and faster production. Compact in size, these machines require minimum space and yield dust free operation. No product is wasted and no pollution is caused. These machines are used for grinding all types of wheat, pulses, dry items and other food products.

Size of emery stone	6" 150.00 x 20.00 x 31.75
A Proxy grinding per hour	Fine 08 Kg.Course 10 Kg.
Temperature	55°c-65°c after 2 hours
Structure of body	Stainless Steel & cast iron
Electric Motor	A/c. Single Phase – 50 cycles1 H.P. 220/250 Volts 960 R.P.M.
Electricity Consumption	1 unit per hour (Approx)
Weight	Approx- 26 Kg.
Volume	Length 25cm, Width 20cm, Height 58cm
Accessory	Hopper Regulator, Knobs, Delivery Cover, On/Off Switch, Push Button, Stop-pin,Outlet, Electric motor inside, Platform, Indicator Lamp

We manufacture and provide wafer machines. It is made up of aluminum & stainless steel and are light in weight.

Main Features:

• All Contacting parts are aluminum & Stainless Steel
• 2 numbers adjustable HSS blades
• Arrangements for thickness of slices can adjust
• Light Weight
• Suitable for potato, Raw banana, Ginger, Cucumber etc for slices
• Use full for hot chips servers
• Size 8 inch (L) X 7 inch (B) X 8 inch (H)

We have designed and produced pistachio, almonds and chips making machines that is operated by hand & motor also. These chips making machines are used for effective as well as continuous crushing that facilitates the production process.

Compact in size, these chips making machines are well suited for cashew nut, almonds, pistachio nut cutting machines. The different contacting parts of our machines is made from aluminum and stainless steel 304. These machines ensure completely dust free operation and no wastage of product is done. Our machines have single pieces crushing chamber no separate joints or fabrication for outlet.

The different types of standard accessories offered with us are a set of 3 Nos. perforated round hole screens that are supplied with the machine and motor.

We mnaufacture a nd export Cashew Nut making machines and almond broken pieces making machines.

Features:

• Single pieces crushing chamber no separate joints of fabrication for outlet.
• Effective and Continuous crushing, leading to increased production and faster return on
• investments.
• Suitable for Cashew nut, Pistachio nuts, Almonds cutting machine.
• Compact Size.
• Dust free operation. No wastage of product and no pollution hazards.

Alternate:

All contacting parts of stainless steel 304 / 316 can be supplied at extra cost. Please ask for the prices.

Standard Accessories:

A set of 3 Nos. perforated round hole screens are supplied with the machines.

Our collection of green chilly cutters are offered with various features. These green chilly cutters are highly efficient, these machines are used to cut green chillies.